Used Doosan D90S-5 for sale (420)

Condition: good (used), Year of construction: 2014, 320mm max cutting diameter, 510mm swing, 305mm max turned length, 51mm bar capacity, 11kW motor, Bwobu Ufnsvygtlowel Fanuc i-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, spindle speed 5000rpm,

Condition: excellent (used), Year of construction: 2014, operating hours: 4,896 h, - Control FANUC 31i - model B - Machine hours Control on: 26,400 h Spindle: 4,896 h - 2 turrets Bwobu Ujrr U Aqofnwsl - 1st turret 12 stations - 2nd turret 8 stations - no driven tools - max. turning diameter 370 / 240 mm (turret 1 / 2) - max. turning length 1,030 mm - max. bar diameter 76 mm - Tailstock - Bar feeder interface - scraper conveyor LNS - automatic tool measurement (tool setter) - Coolant pump 10 bar, 30 l/min Machine weight 7,000 kg

Condition: good (used), power: 45 kW (61.18 HP), fuel type: diesel, Year of construction: 2017, operating hours: 4,444 h, Year of manufacture: 2017 Field of application: Construction Empty weight: 8.600 kg Technical condition: good Bobusv Sdhqj Ufnwowl Visual appearance: good Please contact Pieter Tolhoek for more information

Condition: used, Year of construction: 2015, operating hours: 5,672 h, * Radio * Air conditioning * Heating Bebu Ufnelah I Hewjwl * Camera ----* Adjustable boom * Bucket * Work lights * Hammer, grapple & shear hydraulics ----* Model: DX 225LC-3 * Engine: Doosan 124.3 kW * Weight: 21,900kg * Year of manufacture: 2015 ----Internal vehicle number: 7606----Subject to errors and prior sale.

Condition: used, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 4,730 mm, fuel type: electric, mast type: triplex, construction height: 2,230 mm, Optical condition: new, Technical condition: new Bwjbev Thaaju Ufnwel

Condition: ready for operation (used), Year of construction: 2011, Specifications : Table surface 1400 x 670 mm X axis travel 1270 mm Y axis travel 670 mm Z axis travel 625 mm Max. table load 1000 kg Spindle speeds 1 - 8 000 RPM Main motor power 15 KW Spindle taper BT 40 Rapids 30 m/min Approx. dimensions 3 200 x 2 750 x H 2 940 mm Approx. weight 9000 kg Equipped with : Bwjbu Ufsnab R Nonwel CNC : FANUC i series + Manual Guide 30 ATC 20 Bar thru spindle coolant Swarf Conveyor 4th axis ready

Condition: excellent (used), Year of construction: 2015, operating hours: 4,267 h, Functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 35 kVA, torque: 118 Nm, controller model: fanuc, DOOSAN DNM 500II Bsbet N Rirju Ufnwswl options Coolant though spindle 20Bar Touch probe Heidenhain 12.000 rpm High speed option Data server 1GB Ethernet connection 4th axis preparation Tool load monitoring

Condition: excellent (used), Year of construction: 2021, 600mm Swing, 300mm Max cutting Diameter, 513 mm max cutting length, 12 Station Turret, Bwobujvxvimj Ufnwsl 65mm bar capacity, 4500rpm 18.5kW Spindle, Fanuc I series, C Axis & Milling 5000rpm , c axis 0.001 degrees, Tool setter, parts catcher , Low Volt Light, Tailstock, Swarf Conveyor, 3 jaw chuck.

Condition: used, Year of construction: 2010, operating hours: 6,000 h, DOOSAN HM-1250 / HMC MACHINE Bjbu Uewcv Rkjfnwjwl

Year of construction: 2011, operating hours: 5,477 h, Condition: ready for operation (used), General Data Measurements width 1863 Measurements depth 4600 Measurements height 1863 Machine weight 6000 Control Unit Brand FANUC Model I series Main Drive Spindle speed range 3500 Number of axis 3 Bjbu Uou H Rpnefnwewl Media Chip conveyor Yes Additional Equipment Tool holders 2+2 driven tools Automatic tool measurement Oil catcher Oil mist filter (Losma) This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, Functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, tool mount: 32 mm, type of input current: three-phase, overall weight: 9,450 kg, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. Bsbu Ufevri I Aonwowl No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST , year 2012 Location 78176 Blumberg Turning diameter 760 mm turning length 1540 mm Control FANUC 31i Chuck diameter 254 mm Bar diameter 76 mm Spindle bore 86 mm Turning diameter over bed 1000 mm x-axis 630 x 220 mm z-axis 1585 x 1515 mm y-axis 230 mm Bjbu Ufnercf Dyowowl Speed 4,000 rpm Spindle nose A2-8 Milling spindle speed range 10,000 rpm Tool changing device 80-fold Tool turret 12-position Tool holder BMT 65 P, Capto Drive 26/22 kW Total power requirement 100 kVA Machine weight approx. 15.5 t Space requirement approx. 6.1 x 2.7 x 3.0 m with counter spindle, lower tool turret, driven tools and 80-fold tool magazine Hydraulically operated hollow clamping device 12-station tool turret at the bottom with BMT 65 P Chuck blow-out system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the counter spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for the main and counter spindles Automatic shutdown at the end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended coolant system High pressure and paper belt 80-fold tool magazine Due to high office costs (customs regulations) we do not deliver to Turkey, Iran, Russia and Belarus. Request more information

Condition: new, power: 36 kW (48.95 HP), color: orange, overall weight: 5,400 kg, drive condition: 100 %, chain condition: 100 %, Year of construction: 2020, operating hours: 8 h, Equipment: air conditioning, cabin, standard shovel, steel tracks, - NEW with 8H - steel chain - Climate control - 36 kW - 5400 kg Bsbu Ufnji Tdy Njwowl - Backhoe bucket 64 cm wide Sale due to business closure

Condition: excellent (used), Year of construction: 2019, Swing over bed 600mm, swing over carriage 400mm, 81mm bar capacity machining diameter 350mm, machining length 537mm, 12 position turret, Fanuc series I control, Spindle 3,500 rpm, Bwjbu Ufnovw Shiewol swarf conveyor, tool setter, parts catcher, tailstock, 3 jaw chuck, barfeed unit.

Condition: used, Year of construction: 2018, operating hours: 2,790 h, lifting height: 4,730 mm, free lift: 1,600 mm, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Field of application: Internal logistics Empty weight: 4.790 kg Battery: 620 Ah, 80 V, Year of manufacture 2018, Brand of battery Midac Lifting capacity: 2.500 kg Maximum passing height: 220 cm Serial number: FBA17-1390-00445 Please contact Johanny Hendrikse for more information Bwsbu Ufnsuballowsl

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand DOOSAN FANUC Model i Series Movement Bsbu Ufnjuq Sgnjwswl X-Axis Movement 160 mm X-Axis Rapid Traverse 16 m/min Z-Axis Movement 530 mm Z-Axis Rapid Traverse 20 m/min Workpiece Workpiece drm over bed 510 mm Workpiece drm 270 mm Workpiece X 522 mm This 3-axis DOOSAN PUMA 215 vertical turning machine was manufactured in 2011. It features a swing over bed of 510mm, a workpiece diameter of 270mm, and a length capacity of 522mm. Equipped with a DOOSAN FANUC i Series CNC system, it offers rapid traverses of 16 m/min in X and 20 m/min in Z. A great opportunity to buy this DOOSAN PUMA 215 vertical turning machine. Contact us for further details regarding this vertical turning machine. Application Types Turning

Condition: good (used), Year of construction: 2007, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, Bwebu Uovvui Hsfnwjl 65mm bar capacity, Y axis =/- 80mm, B axis =/- 120 Degrees, C axis 0.001 degree, 40 station ATC, 12 station lower turret, 10000rpm milling 18.5kW, 22kW spindle motors, FANUC 18i-TB control, tool setter, Coolant, 6 x machines available.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,070 h, lifting height: 4,750 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, battery capacity: 690 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Field of application: Internal logistics Serial number: FBA12-2470-00531 Weights Empty weight: 3.554 kg Battery Battery: 690 Ah, 48 V, Year of manufacture 2017, Brand of battery tab Functional Lifting capacity: 1.800 kg Maximum passing height: 210 cm Bwsbu Ufnor Eqivswjl Condition Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Tyre brand: non marking Fork carriage: Sideshifter Latest inspection: 2024-04-08 Additional information Please contact Johanny Hendrikse for more information

Year of construction: 2024, Condition: ready for operation (used), General Data Measurements width 1630 Measurements depth 3735 Measurements height 1720 Machine weight 5900 Control Unit Brand FANUC Model 0iPLUS Main Drive Spindle speed range 5000 Spindle motor power 18.5/15 kW Number of axis 3 Tail Stock Pinol diameter 100 mm Pinol tool taper MT#5 Tools Bwebu Uot Rlt Iefnwol Slots in storage 12 Media Chip conveyor Yes Additional Equipment 12 Hydraulic Chuck 12-position BMT55 Servo Power Turret BMT 55 Power Tool Holder (Axial and Radial) Box Guideway Hydraulic Power Unit 30 Integral Inclined Bed Tool Kit Tool Holders & Boring Sleeve Lubrication Equipment Signal Tower (Yellow, Red, Green) General Data Measurements width 1630 Measurements depth 3735 Measurements height 1720 Machine weight 5900 Control Unit Brand FANUC Model 0iPLUS Main Drive Spindle speed range 5000 Spindle motor power 18.5/15 kW Number of axis 3 Tail Stock Pinol diameter 100 mm Pinol tool taper MT#5 Tools Slots in storage 12 Media Chip conveyor Yes Additional Equipment 12 Hydraulic Chuck 12-position BMT55 Servo Power Turret BMT 55 Power Tool Holder (Axial and Radial) Box Guideway Hydraulic Power Unit 30 Integral Inclined Bed Tool Kit Tool Holders & Boring Sleeve Lubrication Equipment Signal Tower (Yellow, Red, Green) This 3-axis DOOSAN PUMA 3050 LM lathe was manufactured in 2024. It features a robust 12-position BMT55 Servo Power Turret, a powerful main spindle motor at 18.5/15 kW, a spindle speed of 3.000 rpm, and a milling spindle speed of 5000 rpm. The machine includes a 12 hydraulic chuck, chip conveyor, and a FANUC - 0iPLUS control system. Ideal for precision, the DOOSAN PUMA 3050 LM machine we have for sale represents a significant opportunity. Contact us for further details regarding this turning machine. Application Types Turning

Condition: excellent (used), Year of construction: 2018, operating hours: 7,935 h, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Field of application: Internal logistics Serial number: FBA12-2480-00343 Weights Empty weight: 3.709 kg Battery Battery: 750 Ah, 48 V, Year of manufacture 2018 Functional Lifting capacity: 2.000 kg Maximum passing height: 230 cm Condition Technical condition: very good Visual appearance: very good Bwebjrpk N Esu Ufnwjl Other information Latest inspection: 2024-02-07 Additional information Please contact Johanny Hendrikse for more information

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 18000 kg Control Unit Brand FANUC Model FANUC 18I TB Main Drive Spindle speed range 2000 RPM Spindle motor power 30 kW Tool taper ASA A2-11 Number of axis 2 Movement X-Axis Movement 380 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 20 m/min Turret Number of turrets 1 Bebjvmt Sbeu Ufnwswl Additional Equipment Holders for External Turning: HO10-25RL (4 pcs) Holders for Face Turning: HF10-25RL (2 pcs) Holders for Internal Turning: HB10-50N (4 pcs), HB10-40N (2 pcs) Reduction Sleeves: BS 40-10, -12, -16, -20, -25 (2 sets) This DOOSAN V740T vertical turning machine was manufactured in 2005. It features a maximum swing diameter of 800 mm, turning diameter of 740 mm, and a turning length of 760 mm. The main spindle supports a rotational speed up to 2000 RPM with a motor power of 30 kW. It includes a 12-position turret and rapid traverse rates of 20 m/min for both X and Z axes. If you are looking to get high quality turning capabilities consider the DOOSAN V740T machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Year of construction: 2022, operating hours: 1,025 h, Condition: ready for operation (used), General Data Measurements width 1620 mm Measurements depth 2795 mm Measurements height 1650 mm Machine weight 3500 kg Control Unit Brand FANUC Main Drive Spindle speed range 4000 rpm Spindle motor power 15 kW Number of axis 2 Movement X-Axis Movement 175 mm X-Axis Rapid Traverse 30 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 36 m/min Turret Number of turrets 1 This DOOSAN Lynx 235II was manufactured in 2022. A robust horizontal turning machine featuring a 8 inch chuck, it handles a max turning diameter of 320 mm and length of 525 mm. With a bar working diameter of 65 mm and rapid traverse rates up to 36 m/min, it's ideal for efficient operations. If you are looking to get high quality turning capabilities consider the DOOSAN Lynx 235II machine we have for sale. Contact us for more information. Bebu Ufnevcr I Tjwjwl Application Types Turning

Year of construction: 2007, Condition: ready for operation (used), Control Unit Brand FANUC Model 21i-TB Main Drive Tool taper ASA 11 Number of axis 3 Media Chip conveyor Yes Additional Equipment Tool holders: Yes Driven tools: 4 included Tailstock: Yes This 3-axis DOOSAN PUMA 400M horizontal turning machine was manufactured in 2007. It features a turning diameter of 550 mm, swing over bed of 560 mm, and a chuck diameter of 380 mm. Equipped with a FANUC 21i-TB CNC, 12-position automatic turret with driven tools, C-axis, and a tailstock. A robust choice for precision machining. Contact us for further details regarding this horizontal turning machine. Application Types Turning Bwjbu Ufnsuxgqrowjl

Condition: ready for operation (used), Year of construction: 2010, Main Drive Spindle speed range 3500 Tool taper ASA 8 Movement X-Axis Movement 255 mm Z-Axis Movement 800 mm 1-AXIS Movement 360 2-AXIS Movement 360 Bwsbotyc Rqju Ufnwjl Workpiece Workpiece drm over bed 800 mm Workpiece drm over support 620 mm Turret Number of tool slots 12 Media Chip conveyor Yes This 8-axis DOOSAN TT2500SY lathe was manufactured in 2010. It features a maximum turning diameter of 390mm, a bar passage of 76mm, and dual spindles with speeds up to 3500 rpm. The machine includes a Y/A axis for the counterspindle, a 360º C1 and C2 axis, and a turret with 12 live tools capable of 4000 rpm. Dimensions are 5000 x 2200 x 2340mm, weighing 11700kg. For more information about this lathe, please reach out to us. Application Types Turning

Year of construction: 2014, Condition: ready for operation (used), Control Unit Brand FANUC Model 0iTD Main Drive Spindle speed range 6000 Spindle motor power 15 kw Workpiece Workpiece drm over bed 510 mm Workpiece drm over support 290 mm Turret Number of tool slots 12 (up to 24 tools possible) Additional Equipment Tool Presetter This DOOSAN LYNX 220LMA horizontal turning machine was manufactured in 2014. It features a FANUC 0iTD controller with Manual Guide, a maximum spindle speed of 6,000 RPM, and spindle power of 15 kW. The machine supports a max turning diameter of 250 mm and length of 510 mm. It includes a tool presetter and 12 turret stations, expandable to 24 tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN LYNX 220LMA machine we have for sale. Contact us for more information. Application Types Turning Bwobu Usu Im Upefnwsl