Used Liebherr L554 2+2 for sale (239)

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Knsdpfx Ahj Aapgzo Noc

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator lubricated - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70%. - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Kedpfx Ahozrzyme Nenc Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep-reach bucket volume: approx. 0.60 – 1.00 m³ 191026ä

Condition: used, Year of construction: 2015, operating hours: 6,296 h, Liebherr R922LC crawler excavator from 2015 with only 6,296 operating hours! ----* Manufacturer: Liebherr * Type: R922LC * Year of manufacture: 2015 * Operating hours: approx. 6,296 * Last service at approx. 5,900 operating hours * German machine * Incl. Lehnhoff MS21 quick coupler * Incl. hydraulic trenching bucket, 2 meters wide * Approx. 60% undercarriage remaining * More photos and videos available upon request Ksdpfez Ta Hmex Ah Njnc * Price on request ----For further questions, please call: Erik Kortum: WhatsApp ?All information without guarantee, errors and prior sale excepted.

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 Knsdpfx Ajy Dt A Toh Noc - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: used, Year of construction: 2015, operating hours: 9,014 h, * Radio Knodpfjv H Ht Ejx Ah Nec * On-board computer * Rear view camera * Driver comfort seat * Seat heating * Air intake at the top * Exhaust behind the driver's cab * Central lubrication ----Structure: ROPS driver's cab fully glazed, touch screen monitor with color display. Liebherr 4-cylinder diesel engine D934A7, 7,014 cc, 129 KW/175 HP, Liebherr compact planetary gear with 2 speed levels (level 1-3.7 km/h, level 2-6.1 km/h). Adjustable boom, hydraulic quick-change system, 5 additional hydraulic connections. Transport dimensions read approx: 10,500x3000x3060mm (LxWxH), chain width approx. 750 mm, track width: 2,250 mm----Last service carried out in 02/24 at 8,022 hours Sale only to traders. ONLY THE NET PRICE IS TO BE PAID FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see imprint).

Condition: used, Year of construction: 2015, operating hours: 9,014 h, * Radio * On-board computer * Rear view camera * Driver comfort seat * Seat heating * Air intake at the top * Exhaust behind the driver's cab * Central lubrication ----Structure: ROPS driver's cab fully glazed, touch screen monitor with color display. Liebherr 4-cylinder diesel engine D934A7, 7,014 cc, 129 KW/175 HP, Liebherr compact planetary gear with 2 speed levels (level 1-3.7 km/h, level 2-6.1 km/h). Adjustable boom, hydraulic quick-change system, 5 additional hydraulic connections. Transport dimensions read approx: 10,500x3000x3060mm (LxWxH), chain width approx. 750 mm, track width: 2,250 mm----Last service carried out in 02/24 at 8,022 hours Ksdpov H Htlsfx Ah Nonc Sale only to traders. ONLY THE NET PRICE IS TO BE PAID FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see imprint).

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints - No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher Kodpfx Ahjyqn Hlj Nenc * Road approval 32 km/h Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: used, axle configuration: 2 axles, first registration: 10/2017, suspension: air, tire size: 425/65R22.5, wheelbase: 1,320 mm, Applicable material: Concrete Suspension: air suspension Rear axle 1: Tyre size: 425/65R22.5 Rear axle 2: Tyre size: 425/65R22.2 Drive: Wheel Knsdpfxoy Rafbe Ah Nec Empty weight: 7.550 kg Carrying capacity: 24.150 kg GVW: 31.700 kg Make of bodywork: LIEBHERR

Condition: used, Year of construction: 2019, operating hours: 7,200 h, Equipment: all wheel drive, Very nice Liebherr L 546 for sale Top condition - low operating hours: Liebherr L 546 Z 2plus1 Delivered to customer on April 26, 2019 Original paint Chassis number: VATZ1560-054320 Year of manufacture: 2019 Operating hours: approx. 7270 4-cylinder inline engine, 123 kW/167 hp, water-cooled with turbocharger, emission stage 4 Operating weight depending on equipment: approx. 15,000 kg Dimensions depending on equipment: Machine length: 7,200 mm, width 2,500 mm, height 3,300 mm, hydrostatic drive with 3-speed gearbox * Driving vibration damper BSS? Suspension system for attachments * Central lubrication system, factory installed by Liebherr * Reversing fan for cleaning the radiator package - reverse operation * Climbing aid in front of the windshield for easier cleaning of the windshield * Air filter with pre-separator "TopAir" for pre-cleaning the intake air * Premium display with touchscreen * Driver's seat "Comfort" with pneumatic suspension, seat heating, and headrest * Automatic climate control - maintains the set temperature automatically * Adjustable steering column * Armrest on the right * Opening window on the left in the driver's door * Foldable exterior mirrors * Radio with hands-free system * Cooler box in the cab Knsdpfx Ahozrapaj Nsc * Rear view camera * Lamp bracket made of steel instead of plastic * 4 work lights on the rear of the driver's cab roof, LED * 4 work lights on the front of the driver's cab roof, LED * Fire extinguisher on the fender * Road approval * Tires 20.5 x 25 L3, front 2 x 30% remaining * Tires 20.5 x 25 L3, rear 2 x 30% remaining * Net price with permanently mounted earth bucket, approx. 2.8 cubic meters: 73,900.00 EUR net + VAT Optional equipment available for an extra charge: * Hydraulic quick coupler 3,550.00 EUR * Pallet fork, 5 or 8 tons, from 2,190.00 EUR Used scales incl. installation * E.g. Pfreundt WK 60 S 5,900.00 EUR * Also available with printer * 3rd hydraulic circuit for attachments such as tipping bucket, grab bucket, sweeper, etc. on request * All prices net export? Domestic plus 19% VAT We can offer you the transport to your location. Sale only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately.

Condition: used, axle configuration: 2 axles, first registration: 07/2009, suspension: air, tire size: 425/65R22.5, wheelbase: 1,310 mm, Applicable material: Concrete Tyre size: 425/65R22.5 Suspension: air suspension Drive: Wheel Empty weight: 8.420 kg Carrying capacity: 27.580 kg Kedpfx Asuc Enzjh Nonc GVW: 36.000 kg Make of bodywork: LIEBHERR

Condition: used, Year of construction: 2007, Equipment: all wheel drive, This machine has just arrived in our inventory: Kodpfx Aszxb Anoh Nsnc Liebherr wheel loader L 524 Z 2 plus 1 ?Very nice machine!!! Mostly original paint No particulate filter – no AdBlue VIN: VATZ0659VZB019076 Z – Load sensing system Year of manufacture: 2007 Recorded operating hours: 10,123 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 118 hp, hydrostatic drive with 3 driving ranges: driving speed range 1: 0–6.0 km/h, driving speed range A1-2: 0–16.0 km/h, driving speed range A1-3: 0–34.0 (40) km/h * Ride vibration damper for the load-sensing system – load-sensing system damping * Hydraulic auxiliary control circuit for tipping bucket, grab bucket, silage block cutter, sweeping brush, etc. * Air conditioning * Comfort driver's seat with pneumatic suspension * 4 work lights on the front of the cab roof * 2 work lights at the rear * Rear window heating * Battery disconnect switch * Rotating beacon (flashing light on the rear of the cab roof) * Road approval possible Permissible total weight: 13,500 kg Machine width: 2500 mm * Tires, front axle: 17.5 x 25 L3 – 50% * Tires, rear axle: 17.5 x 25 L3 – 50% Offer with quick coupler and 2.0 cubic meter bucket for a price of €44,900.00 net + VAT, ex warehouse Gemmingen Equipment available at an extra charge: * Tipping bucket from 2.5, from €4,950.00 * Bucket with lower mounting for quick coupler, 3.0 cubic meters: €3,660.00 * 4-in-1 bucket 2 cubic meters, on request * Pallet fork 5 tons from €2,190.00 Can also be supplied with a used scale if required! Pfreudt WK 60 * Optionally with printer for the scale Sale only to commercial businesses or for export. Sold as is, in the condition the machine is in. No guarantee or warranty. The specified mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the details in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. Knodpsz E Hx Sefx Ah Nec The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: used, Year of construction: 2010, operating hours: 7,900 h, Equipment: all wheel drive, Liebherr L 514 P (Parallel linkage) Stereo loader (articulated steering + rear axle steering - extremely maneuverable!!!) Without particulate filter and without AdBlue!!! Chassis number VATZ1115JZB 0025394 Year of manufacture 2010 Operating hours according to meter 7996 P-linkage - with parallel guidance Power 72 kW / 98 hp, total weight 10500 kg Equipment: * Hydraulic quick coupler * Automatic central lubrication system * 4 work lights at the front on the cab roof * Radio preparation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (flashing light) at the rear of the cab - center * Rear view camera with separate monitor * Main switch for electrical system * Road approval possible!!! Hydrostatic drive with 2 speeds - 30 km/h Tires front 17.5 R 25 40% good, rear 17.5 R 25 30% good Width 2400mm Price with quick coupler and bucket 1.6 cbm - 33,900 € Various buckets for this machine in stock, available for an extra charge. Equipment available on request:* Mixing-screening bucket Kedpfx Ahsz Hhrve Njnc * Folding bucket 1.6 or 2.0 cubic meters from 3,250 € * High-dump bucket from 2.0 - 2.5 cubic meters from 3,950 € * Volume bucket 3.0 cubic meters No. 59 - 2950 € * Screening-mixing bucket - price on request * Pallet fork 5 tons from 2,190 € Other equipment on request!!! All prices are - net price ex warehouse + 19% VAT or export! We can gladly offer you the transport to your location. Sale only to businesses or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information / descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the details in the order confirmation and invoice apply. The seller assumes no liability / warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, Year of construction: 2013, operating hours: 9,710 h, One of the last models without a particulate filter: Liebherr L 542 Z 2plus1 Only used for light work on paved surfaces? No construction site! German machine! Machine delivered on January 15, 2013 – produced in 2012 – therefore still without a particulate filter! Excellent machine – technically and visually well-maintained – All services performed at Liebherr – last recorded on October 8, 2020 at 8678 hours Chassis No. VATZ0435TZB032052 Year of manufacture 2013 Operating hours approx. 9710 Liebherr 4-cylinder inline engine, water-cooled with turbocharger Emission level III, 142 hp with 6.9 liters displacement (Liebherr engine type 934) * BSS hub damper, driving vibration damper – vibration damping * 3rd hydraulic control circuit for tipping bucket, sweeper, grab bucket, etc. * Air conditioning * Central lubrication system – factory installed by Liebherr * Reversing warning device, audible (beeper) * Engine air intake via pre-filter TOP-AIR * Comfort driver's seat with pneumatic suspension * Steering wheel adjustable in inclination * 4 work lights on the front of the cab roof * 4 additional lights on the rear of the cab roof * 2 additional lights on the side of the cab roof * Protective grille for headlights at the front * Radiator with coarse mesh for easier cleaning * Fluff filter in front of the radiator * Reversing fan to blow out the radiator (fan is reversible) * Pre-installation for rotating beacon, yellow light, on the top center of the cab * Battery disconnect switch * Radio pre-installation * Road approval Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Hydrostatic drive with 3-speed transmission Tires 20.5 x 25 L3, front, 50% remaining, Michelin Tires 20.5 x 25 L3, rear, 40% remaining, Michelin Offer with permanently mounted bucket, 2.8 cubic meters, for the price of €43,900.00 net Optional equipment available at an additional cost: * Hydraulic quick coupler €3,550.00 including replacement of the permanently mounted bucket with a quick-coupler bucket * Tipping bucket from 3.0 cbm to 5.5 cbm from €4,950.00 * Bucket with undercarriage for quick coupler, 3.0 cubic meters from €3,660.00 * Volume bucket, 4 cubic meters, €4,500.00 * 4-in-1 bucket, 2 cubic meters, on request Kodpez Rh Rhsfx Ah Nsnc * Pallet forks, 5 or 8 tons, from €1,990.00 If required, also available with a used scale! Pfreundt WK 50 – €3,950.00 All prices net, export – domestic plus 19% VAT. Sale only to businesses or for export. Sale in the condition as it stands. No guarantee or warranty. The indicated mileage or operating hours are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We will also gladly accept your vehicle in part exchange.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 011171 LWE, mileage: 457,230 km, first registration: 01/2026, fuel type: diesel, tire size: 13R 22,5, fuel: diesel, brakes: other, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, Year of construction: 1980, operating hours: 11,399 h, Mobile crane Liebherr LTF 1025F Knsdpfx Aoztr D Sjh Noc Year of manufacture: 1980 Lifting capacity: 25 tons Telescopic boom: 24.40 m Approx. 457,230 km, 11,399 operating hours. Diesel engine Manual transmission Crane has been inspected annually. Current DEKRA expert assessment valid until 03/2027. Ready for operation. Inspection possible by appointment. Further information and pictures available upon request.

Condition: used, Year of construction: 2023, operating hours: 1,578 h, Spare wheel, adjusting cylinder with piston rod shoe : 2550 Attachment 1 (manufacturer, cutting width, etc.): 400 Attachment 2 (manufacturer, cutting width, etc.): 600 Attachment 3 (manufacturer, cutting width, etc.): 950 Attachment 4 (manufacturer, cutting width, etc.): Ditching bucket 1700 mm Attachment 5 (manufacturer, cutting width, etc.): Screening bucket 1200 mm Boom with tube rupture valve -> safety tube rupture valve: Yes Boom type: High and laterally adjustable Automatic lubrication system -> auto-lubrication system: Yes CE marking: Yes Operating weight in kg: 13800 Emission class: Emission class 4 Grabber hydraulics: Yes Hammer hydraulics: Yes Air conditioning: Yes Bucket stick length in mm: 1850 Engine: Deutz TCD 3.6 L4 Radio: Yes Tire brand: Liebherr 290/90-20 Rear view monitoring with camera: Yes Scissor hydraulics: Yes Blade support: Yes Quick coupler type: fully hydraulic Quick coupler: Liebherr SW 33 Likufix Swivel bucket hydraulics: Yes Condition of rear tires: 20% worn Condition of front tires: 20% worn Optical condition: 2 well-maintained Technical condition: 2 good condition ---- Rear dozer blade, 2,550 mm wide Twin tires, Mitas EM-22, 9.00-20 PR 18 Radio Comfort Steering wheel steering Standard driver's seat Automatic climate control Knsdpfxez Rttbj Ah Noc Adjustable, swiveling boom, 4.25 m Bucket stick, 1.85 m Incl. quick coupler SW33 Likufix Location: Passau

Condition: used, Year of construction: 2016, Equipment: all wheel drive, This machine has just arrived at our facility: Liebherr wheel loader L 526 Z 2 plus 1? In good condition? Excellent features? Looks like new!! Liebherr service maintained? Service history stored on the Liebherr central computer! All major services performed by Liebherr. VIN: VATZ1558PZB0444200 Year of manufacture: 2016 First put into service: 2017 Operating hours: Original 10,566 hours, verifiable! Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 136 hp, emission stage TIR IV (Note: Brochure = TIR V!!!) Hydrostatic drive with 3 driving ranges, driving speeds: Range 1: 0 - 6.0 km/h, Range A1-2: 0 - 16.0 km/h, Range A1-3: 0 - 20.0 (40) km/h (currently limited to 20 km/h!) * Standard Z-linkage * Quick coupler with hydraulic attachment kit, 3rd hydraulic circuit for tipping/grabbing/or 4/1 bucket with multi-quick coupler, towing hitch at the rear, ride vibration damper, linkage vibration damper, automatic central lubrication system - factory installed by Liebherr, air conditioning, automatic climate control - automatically maintains temperature, step for easier cleaning of the windshield, steel lamp mounts instead of plastic, folding and heated exterior mirrors, tilting window on the left/driver's door, premium display with touchscreen, driver's seat "Comfort" with pneumatic suspension, seat heating and headrest, Comfort radio with hands-free system, 2 work spotlights on the cab roof at the rear (LED), 2 work spotlights on the cab roof at the front (LED), fuel filter with pre-filter, air intake with pre-separator - TopAir, reversing fan for blowing out the radiator, interior mirror, adjustable steering column, pre-installation for rotating beacon - flashing light, folding upper section of the cab in the center, rear view monitoring with camera - monitor in the display, crane/tie-down eyes at the rear and front, protective ventilation system. Knjdez A Nqrspfx Ah Njc Tires 17.5 x 25 L3, front: 2 x 60% Tires 17.5 x 25 L3, rear: 2 x 60% Offer with quick coupler and bucket - at a price of €62,900.00 net. Additional equipment available at an extra cost: * Tipping bucket from 2.5 to 4 cubic meters from €4,950.00 * Bucket with bottom holder for quick coupler from 3.5 cubic meters €3,660.00 * 4-in-1 bucket 2 cubic meters, upon request. * Pallet fork 5 tons from €1,850.00 If desired, also available with a used scale! Pfreundt WK 60 (calibratable) - €5,900.00 Printer for the scale, price upon request. Prices net + VAT or for export. Note: The brochure only approximately corresponds to the offered machine!!! (Brochure is for machines from the year of manufacture 2019 onwards with engine emission class V) Sale only to business customers or for export. Sale in the condition as is. No guarantee or warranty. The specified mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics.

Condition: used, Year of construction: 2011, operating hours: 16,017 h, Equipment: ABS, all wheel drive, * Enclosed cab Kedpfxe Aau Nbe Ah Njnc * Radio * TFT monitor * Electric parking brake * Turtle and hare mode (slow and fast speed settings) * Rear view camera system * Load shedding function * Hammer and grabber hydraulics * Central lubrication system * Dozer blade * Hydraulic suspension * Operating manual * LENHOFF quick-change system ----* Dimensions (L x W x H): 7000 x 2750 x 4000 mm * Tires: 10.00-20 10PR * Engine power: 95 kW ----Vehicle number 12588 -----Errors and prior sale excepted.

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2009 In General: Year of manufacture:2009 Control system:Siemens 840 D External gear diameter:1,200 mm Internal gear diameter:1,200 mm Maximum gear width:260 mm Maximum workpiece diameter:1,500 mm Machine base: Travel:600 mm Lateral adjustment:+/- 60 mm Cutting head: Spindle diameter:125 mm Tool holder:SK 45 Distance between spindle and table:0–820 mm Stroke length:270 mm Max. module:16 mm Max. tool diameter:300 mm Max. spindle speed:25 rpm Table: Table diameter:900 mm Kodpozdxi Nofx Ah Nonc Table bore:320 mm Bore depth:520 mm Max. speed:12 rpm Max. table load:95 kN Equipment: Chip removal:2 magnetic belt conveyors Coolant supply:Cutting oil system with filter and temperature control Set-up operation:Electronic handwheel

Condition: used, axle configuration: 2 axles, first registration: 03/2013, suspension: air, tire size: 425/65R22.5, wheelbase: 1,320 mm, Applicable material: Concrete Knodpfx Ahjuc Az Sj Njc Suspension: air suspension Rear axle 1: Tyre size: 425/65R22.5 Rear axle 2: Tyre size: 425/65R22.2 Drive: Wheel Empty weight: 7.360 kg Carrying capacity: 31.040 kg GVW: 38.400 kg Make of bodywork: LIEBHERR

Condition: used, Year of construction: 2022, operating hours: 5,904 h, - Radio - Air conditioning - 6-way snowplow with flap corners, 4021x1140 mm, with straight cutting edges, capacity 3.87 m³ - Additional weight 1500 kg Knodpfx Ao Aavbloh Njc - Location: Andernach

Condition: used, Year of construction: 2011, operating hours: 12,987 h, Equipment: all wheel drive, Internal vehicle number: MK300045 Kedpfx Aezri Dgsh Njnc Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Liebherr A 904 C Litronic Wheeled Excavator | 20 t | 12,987 Operating Hours For sale: a used Liebherr A 904 C Litronic wheeled excavator, manufactured in 2011. The machine is equipped with all-wheel drive and a quick-coupler system. With an operating weight of 20,000 kg, this wheeled excavator is ideal for earthmoving, civil engineering, demolition, and material handling applications. Technical specifications: * Manufacturer/Model: Liebherr A 904 C Litronic * Machine type: Wheeled excavator * Year of manufacture: 2011 * Operating hours: 12,987 hrs * Weight: 20,000 kg * Drive: All-wheel drive * Quick-coupler system * Environmental badge: 4 (Green) * Vehicle number: MK300045 * Condition: Used * German machine Inspection is possible by prior arrangement. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. Financing example: * Internal number: MK * Purchase price: €42,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €604.02 * Residual value: €9,380.00 If you are interested in this offer or would like to tailor it to your needs, please contact Mr. Enchev. We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1994, operating hours: 8,143 h, Equipment: all wheel drive, * Sunroof Ksdpfx Ahsy Scr He Nonc * Driver’s suspension seat * Shunting hook * Auxiliary heater * Crawl speed ---Superstructure: ROPS driver’s cabin, heated, Engine: Water-cooled 4-cylinder Deutz diesel engine, type 1012, 65 kW, all-wheel drive, travel speed 20 km/h, 8-ply tires, track width approx. 2,530 mm, dozer blade 2500/600 mm, hydraulic axle supports, mechanical quick-change system, adjustable boom, hammer + grapple piping (7 hydraulic connections), excavator bucket 1000 mm / 634 liters For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: used, Year of construction: 2003, Liebherr LC120 Gear Hobbing Machine 3mm maximum hobbable module 1,500 rpm maximum hob speed90mm maximum hob diameter 200mm maximum hob lenght 45 hob head swivel angle 4 mimimum number of teeth 120mm maximum workpiece diameter 250mm maximum axial travel 145mm table diameter 250rpm maximum table speed 17kN load capacity 30mm tailstock travel 17,000mm/min rapid traverse 13kN tailstock holding force 775879h working hours Knedpfx Ahez Stlao Noc

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Knodpfxsz Et N Re Ah Nsc Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.