Used Pottinger Novacat 305 H Rc for sale (69,396)

Condition: new, Year of construction: 2022, Functionality: fully functional, Automatic throughput weigher for grain and oilseed, capacity 5t/h, new, never used. Without control cabinet. Djlrewbk D Neawdzjcg

Condition: used, Year of construction: 2021, operating hours: 2,774 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tires (front): 215/75 R16, Tires (rear): 215/75 R16, Operating hours: 2774, Battery: Li-ion 63 kWh, Width: 1300, First registered: November 2, 2021, Charger: Integrated 22 kW, self-propelled_____Basic equipment of the fully electric CityCat V20e: Cab: Comfortable, suspended, soundproofed aluminum cab. Windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heater fan, sun visors, windshield wiper with washer. Individually adjustable, suspended driver's seat with headrest and 3-point safety belt. Angle- and height-adjustable steering column. Chassis: Two-part ladder frame chassis with "C" profile construction. Independent wheel suspension via shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, and front and side brush drive. Brakes: Hydraulic servo dual-circuit braking system with disc brakes on the front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Drive system: Working speed 0-15 km/h Travel speed 0-50 km/h* Gradeability up to 30% Electric drive output 88 kW Electric fan 8.5 kW Electro-hydraulic unit 12 kW HV battery: Battery type Li-ion Battery capacity 63 kWh Nominal voltage 335 volts Operating time up to 10 hours Charging system: Integrated charger 22 kW Type 2 charging plug Charging time 2 to 3 hours Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control Hydraulics: Hydraulic unit with low-noise gear pumps for fan, steering, auxiliary functions, and front and side brush drive On-board voltage: 12 V electrics, 95 Ah battery Hydraulic servo dual-circuit braking system with disc brakes on the front axle and disc brakes on the rear axle, spring-loaded brake (parking brake) and handbrake valve acting on the front axle. Tires: 4 wheels with 215/75 R16C M+S. Dimensions: Length 4200 mm Width 1300 mm Height 1999 mm Wheelbase 1900 mm Track width 1090 mm Sweeping width 2100 mm Sweeping width with 3rd brush 2700 mm Special equipment: - Lithium-Ion NMC battery, 63kWh, 335V - RAL 9016 white - Suction hose, 4m long (incl. suction pipe), diameter 120mm, with Storz couplings, with hydraulic closing flap - Third front disc brush - Brush diameter. 800mm, with front arm, swivels left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment of both side brushes - Side adjustment of both side brushes, stepless hydraulic adjustment of both brushes individually - Easy clean quick cleaning system for cleaning the KGB side walls, recuperation and leaf grille - Hydraulic side brush pressure regulation of both side brushes with side brush individual lifting, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Broom sp Dcslrawdjiwwghozsg

Condition: like new (used), Functionality: fully functional, machine/vehicle number: 3321702250, Year of construction: 2023, operating hours: 6 h, load capacity: 2,000 kg, lifting height: 120 mm, load center: 600 mm, fuel type: electric, construction height: 734 mm, power: 25 kW (33.99 HP), gearing type: automatic, battery capacity: 205 Ah, battery voltage: 24 V, DGUV certified until: 12/2025, fork carriage width: 560 mm, fork length: 1,220 mm, overall weight: 670 kg, empty load weight: 670 kg, total height: 734 mm, total length: 2,024 mm, total width: 734 mm, color: red, EP RPL201(H) ride-on pallet truck 2000 kg - the latest version of our high-speed trucks available from stock Dsljvxh Eyorawdzocg Guarantee: 12 months on the vehicle 60 months from year of manufacture on the battery Availability: Available from stock! Rent, buy or finance - your choice! Germany-wide service for all EP industrial trucks. Technical data of the high-speed truck: Type: EP RPL201 (H) Load capacity: 2000 kg Load center of gravity 600 mm Drive: electric Travel speed with / without load in km / h. : 9.0/ 12.0 Electric steering Battery: Li-ion 24V/205 AH Lifting height: 120 mm Fork dimensions: 55/170/1220 LSP: 600 mm Width: 733 mm Overall length: 1950/ 2024 mm Own weight: 670 kg Turning radius: 1806 mm Steering: Electric steering Longer service life of the moving parts: Through the use of special materials, heat treatment processes and special sleeves About the RPL series: The RPL series is the latest generation of EP Equipment's ride-on pallet trucks and offers the latest technology for fast and safe loading. Thanks to the integrated Li-ion battery technology and the electric power steering, the RPL series is not only powerful but also extremely ergonomic. Application: The RPL series is perfect for medium to long distance transport tasks within the warehouse, loading/unloading in docks and loading bay applications. The electric power steering ensures precise steering and increases productivity. Features: Robust safety arms: The RPL series safety arms are made of reinforced steel for durability and vehicle structure. Precise working mechanism: Using a sliding motion structure and solid axis processing technology, higher working accuracy is ensured. Increased life of moving parts: Special pin materials, heat treatment processes and custom sleeves increase the life of the moving parts. Reinforced loading wheel assembly: The RPL251 and RPL301 feature reinforced frames and updated loading wheel connections to improve wear resistance and meet heavy-duty applications. EP Equipment's RPL series offers a new level of capability and reliability for demanding transport tasks in warehouse environments. ---- *All prices are subject to VAT. VAT is shown separately. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, Distance between columns 2.750 mm, Distance top of table to spindle nose 1.600 mm, fixed cross rail, 2 tables 2.500 x 4.000 mm, coupled 2.500 x 8.700 mm, power 58 kW, revs 1 – 1.800 rpm, base speed 136 rpm, max. torque 3.500 Nm, feeds and rapids 1 – 10.000 mm/min, traverses x y z 9.502 x 5.515 x 1.000 mm, quill movement 500 mm in 4 steps, automatic tool changer with 60 pockets, automatic mounting, 4 x 90° indexing and heel clearance for RAA Electric and mechanic remanufacturing in 2017 with Dcslraodkmihowdzog • New CNC control SINUMERIK 840 D or at your choice • New electric cabinet • New wiring • New motors for all axis and main spindle • New measuring system HEIDENHAIN LB 382 • Milling carriage general overhauled • New painting

Condition: used, Functionality: fully functional, mileage: 45,203 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,954 mm, overall weight: 3,500 kg, empty load weight: 2,205 kg, maximum load weight: 1,295 kg, operation weight: 2,205 kg, first registration: 11/2016, next inspection (TÜV): 03/2027, loading space length: 4,260 mm, loading space width: 2,014 mm, loading space height: 400 mm, fuel consumption (urban): 8.3 l/100km, fuel consumption (extra-urban): 6.8 l/100km, fuel consumption (combined): 7.3 l/100km, CO2 emissions: 188 g/km, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, number of previous owners: 1, Year of construction: 2016, fuel: diesel, machine/vehicle number: Transit L4, Equipment: ABS, airbag, all-season tires, car registration, central locking, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, sliding door, soot filter, traction control, trailer coupling, truck registration, Transit Flatbed with original 45,000 km in top condition +++ No rental company - No parcel service +++ * Euro 6 - Green particulate matter sticker * Engine: 2.0TDCI - 77 kW / 105 HP * AD BLUE technology * Wheelbase L4: 3954 mm * Rearview camera * 3 leatherette seats - passenger double bench seat with folding table * Height-adjustable driver's seat with armrest * Driver airbag * Central locking with remote control * Electric windows * Height-adjustable steering column * ABS - Anti-lock braking system * ESP - Electronic Stability Program * ASR - Anti-skid control * Brake assist * Hill start assist * On-board computer * Outside temperature display * Radio with USB + Steering wheel remote control * Bluetooth hands-free system * Gear shift indicator * Daytime running lights * Side marker lights * Heat-insulated glass * Storage compartments above the windshield * Storage gallery under the dashboard * Storage compartment under the passenger seat * Power steering * 6-speed manual transmission * Front-wheel drive * Full-size spare wheel * Wooden loading floor with lashing eyes for load securing * Folding aluminum side walls * Total vehicle length: 6797 mm * Cargo space dimensions: 4.26 m long, 2.14 m wide, 0.40 m high * Gross vehicle weight: 3500 kg Dcelrajv Szd Aewdzjg * Payload: 1295 kg * Trailer hitch with a 2750 kg towing capacity * Towing capacity can be increased to 3500 kg * Vehicle is on very good all-season tires, approx. 70 - 80% * Fully serviced, last serviced at 37,000 km * New MOT and AU inspection upon delivery * Clean German vehicle in very good condition, first owner --- Truck net price: €17,450 -- Subject to input errors, mistakes, prior sale -- We also offer affordable financing options and a 24-month warranty, even for business customers. ...

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Dslraon Armaswdzecg Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: refurbished (used), Piston vacuum pump. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 255 m3 / h at 50Hz. Delrawoftzt Sjdzocg Final vacuum: 0.03 mbar abs. Any clarification, do not hesitate to contact us.

Condition: used, Year of construction: 1976, I-beam section - flat steel 220 bei Dm 1200 mm I-beam section - upend - mm angular steel - leg outwards 110x110x14 bei Dm 1000 mm angular steel - leg inwards 80x80x10 bei Dm 1000 mm flat steel flat 100 x 20 bei Dm 1000 mm T-steel / side out 120x120x13 bei Dm 1200 mm U-iron on the x-axis 22 bei Dm 1200 mm pipes 102 x 6 bei Dm 900 mm round material 75 bei Dm 700 mm square material 60 x 60 bei Dm 600 mm bending speed 3,5 m/min No. - Rolls 3 Drive 7,5 kW shaft diameter 125/135 mm weight 6,4 t Dolrsvgnnkjawdzscg dimensions of the machine ca. 2,1 x 2,4 x 1,5 m Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers, pneum. regulation of the clutch pressure of the setting rollers, usable horizontal and vertical, optical read out. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1998, Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and CO₂ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects CO₂ and ensures complete homogenization. Storage tank stabilizes the mixed product before filling. Sanitizing transfer pump moves the sanitizing solution efficiently. Control panel houses all operational and monitoring controls. Dcjlrawsv Ai Hysdzeg Work Cycle of the Used Premix PARMATEC Drinkmix The Used Premix PARMATEC Drinkmix 12000 l/h follows a structured four-step process that ensures accurate proportioning and thorough mixing of ingredients. DeaerationFirst, the system removes oxygen from the water to facilitate carbonation. It does this by injecting a precise amount of CO₂ before the water enters the main tank. Additionally, a specially designed nozzle creates a “rain effect” that enhances oxygen separation. As a result, the system achieves optimal preparation for the next stage. DosingNext, the deaerated water and syrup pass through micrometric valves that regulate their flow with exceptional accuracy. Moreover, the machine displays these flow rates on dedicated graduated indicators, allowing operators to monitor the process in real time. This phase ensures that the final premix meets the beverage’s exact specifications. Final Carbonation and MixingAt this stage, the system injects carbon dioxide in the first section of the heat exchanger coil. Then, a micrometric valve controls the amount of CO₂ while a flow meter displays the exact level. Immediately after injection, carbonation and final mixing take place, ensuring a uniform and well-integrated product. Finally, the last section of the coil, which operates under high pressure, forces the product to fully absorb the CO₂. Storage and StabilizationFinally, the process moves to storage and stabilization inside a pressurized tank. Because this tank operates under controlled conditions, it ensures continuous product flow to the filling machine. At the same time, it allows the necessary resting period for product stabilization. In addition, a specialized regulation system maintains CO₂ pressure at a consistent level, preserving beverage quality.

Year of construction: 1986, Condition: used, Functionality: fully functional, machine/vehicle number: 7080/86, Used steam boiler 3,9 MW. Dolrasv Int Newdzjcg

Year of construction: 2007, Condition: good (used), Volume flow 4,6 m3/min. Pressure output 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz connection thread 1 1/2 inch Operating hour : 8000h Dcelrawji D D Niodzjg With compressed air dryer !!! Space requirement L x W x H 1850 x 1050 x 1760 mm weight 910 kg good condition

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, working width: 380 mm, area performance: 1,500 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 16 l, HAKO SCRUBMASTER B12 TB380 SCRUBBERS NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW SPE 24V 4.5A INTERNAL RECTIFIER 2019 production year 380mm cleaning head (TB380) equipped with a new medium-hardness disc brush, allowing work on any surface. Dcolrev Rx Rqoawdzeg New polyurethane rubber bands, resistant to contact with oil liquids, greases and petroleum derivatives. The device is equipped with a new durable drain and a new suction hose A new, efficient suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (cm): 38 Suction width (cm): 47 Efficiency (m²/h): 1,500 Number of brushes (pcs.): 1 Clean water tank capacity (l): 16 Dirty water tank capacity (l): 22 Weight without batteries (kg): 40 Weight of the machine ready for operation (kg): 80 Power (kW): 0.54 INCLUDED: NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW BATTERIES INTERNAL SPE 24V 4.5A NEW 380mm PPL 0.5 disc brush NEW suction turbine NEW drain hose NEW suction hose Suction bar with new oil-resistant rubbers Tenzi Normal 5 liters liquid - FREE KEY FEATURES: A 16 liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (380mm) ensures high surface efficiency A very legible and intuitive control panel.

Year of construction: 2007, operating hours: 100 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: EN 133445-3, A complete line for the production of margarine, confectionery fats, shortening, etc. is sold, with an additional line for milk powder and an automatic CIP rinsing system. It combines equipment from the following manufacturers: CHEMTECH, ALFA LAVAL, TMCI Padovan, O/K Internatsonal, FAVEO, Bortolinkemo, Atlanta, Cidiesse. The plant is located in Chornomorsk. Both lines were installed in 2012, produced one batch and shut down. The equipment needs to be dismantled. More info by phone and presentation on request. Terms of sale: contract, cash on delivery, dismantling and shipment by agreement. Dcslrju Dmlmeawdzog Description of margarine production lines Composition of line A. - four 5 m3 tanks for emulsion preparation with stirrers and pumps. The tanks are mounted on strain gauges; - four 50-liter tanks for flavoring and coloring with peristaltic pumps; - main heat exchanger-pasteurizer of 3 sections of plate type; - main piston pump; - block of creamers (C1+C2); - block of creamers (C3+C4); - working module with 2 pin rotors; - working module with 2 pin rotors. A separate option (with the possibility of connecting) in the line is an aging pipe and a molding kempak machine for the production of margarine for puff pastry. Line capacity: 5 tons/hour for industrial margarines, 1 ton/hour for puff pastry margarine. Composition of line B. - two 5 m3 tanks for preparation of emulsion with stirrers and pumps. The tanks are mounted on strain gauges; - one 50-liter tank for flavoring and coloring with a peristaltic pump; - plate-type heat exchanger-fuse; - main piston pump; - block of kemetators (C1+C2); - block of kemetators (C3+C4); - working unit with 2 pin rotors; - working unit with 2 pin rotors. The line capacity for industrial margarines and shortening is 5 tons per hour. Two parallel lines for containerization and filling of margarines consist of:  unit for forming cartons;  unit for lining cartons with plastic film;  station for filling margarines into cartons;  unit for sealing cartons;  printer for printing on cartons. Three tanks for SIR washing are installed to wash the production lines and equipment. The tanks are designed to prepare cleaning solutions and clean water for washing. The washing station is equipped with a pump. All processes of product production, container formation, filling and packaging, and transportation of boxes are automated to the maximum extent possible. The level of automation is PLC plus SKADA. To produce new fatty products, Chemtech International Ltd. supplied a pilot margarine plant with a capacity of 120 kg/h. Function: Production and packaging of margarine, confectionery, culinary and bakery fats, as well as for the dairy industry with a capacity of 12.4 tons per hour or production and packaging of margarine for puff pastry with a capacity of 4.5 tons per hour. Function: Manufacturing and packing of confectionery and bakery fats, and dairy industry with a capacity of 18.6 tons per hour or manufacturing and packing of fats for dairy products, cocoa oil substitutes with a capacity of 12.4 tons per hour. Located in Chornomorsk. Both lines were installed in 2012, made one batch on it and stopped. The equipment needs dismantling. More information by phone and a presentation on request.

Year of construction: 2017, Condition: excellent (used), -Dimensions: 920x1400x1740mm -10 levels -Year: 23/11/2017 Dcelet Hup Rerawdzog -Serial number: 255512 -Voltage: 400V -Power: 17kW -Weight: 200kg

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Djlrsfv Hiqoawdzocg Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Year of construction: 2016, operating hours: 3,200 h, power: 232 kW (315.43 HP), next inspection (TÜV): 09/2024, Equipment: air conditioning, all wheel drive, cabin, front linkage, * Deutz-Fahr 9340 TTV * First registration: 29.04.2016 * Year of construction: 2016 * Operating hours: 3,184 h * Adjustable and heated mirrors * Automatic air conditioning * LED work lights * 60km/h top speed * Performance Steering ready with ''EASY-STEER'' function * Cat III top link for FHK with automatic catch hook * External FHK actuation with 7-pin and 3-pin front socket * Load sensing with 210 ltr/min * Additional el. control unit at the rear with 2x DW connections * Suspended and braked front axle * ISOBUS preparation Djlrawdevht Hnozjcg * i-Monitor 2 12'' screen with color camera * K80 ball head coupling -----Internal vehicle number: 9251----Errors and omissions excepted.

Condition: used, power: 135 kW (183.55 HP), fuel type: electric, gearing type: other, axle configuration: 1 axle, first registration: 11/2024, color: white, driver cabin: other, suspension: other, brakes: other, mast type: standard, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, sliding door, ... Subject to alterations, prior sale and errors excepted Dcslreuxiikoawdzeg

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,790 kg, axle configuration: 2 axles, loading space length: 4,070 mm, loading space width: 2,010 mm, loading space height: 304 mm, first registration: 01/2017, next inspection (TÜV): 02/2026, Equipment: Flatbed trailer, loading area 4,070x2010x304mm, 2 loading ramps, payload 2,790 kg, drum brake, tire size 195/50R13C, 100 km/h approval. Your reliable partner for everything to do with automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz since 1971. The Behnke Commercial Vehicle Center always has around 200 vehicles from the van, commercial vehicle and construction machinery sectors! Dcslrajuyrdmjwdzog We offer you ongoing attractive financing options at favorable special conditions. If you are interested, we would be happy to make you an individual offer! Trade-in of your commercial vehicle/construction machine is welcome. If you would like a new TÜV inspection, we would be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed properties. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, Year of construction: 2023, First registered: August 31, 2023_____Equipment:- Ultra-high-performance lithium/iron/phosphate (LiFePo) battery memory effect - including battery heating- Remote diagnosis - 4G vehicle monitoring, online troubleshooting with factory support- Closed glass cabin, cigarette lighter, longitudinally adjustable driver's seat, 2 large shelves and interior lighting- Left-hand drive with driver's seat (left) and passenger seat (right)- Color: white (RAL 9016)- All-season tires- European road approval: N1- Charger LiFePo 220V 16A (maximum charging time 6.5 hours)Special equipment:- Power steering- Hill start assist - Rotating warning light - Class R65 TA1- Double DIN radio with Bluetooth, AUX, hands-free system and rear view camera- Box body (LxWxH) approx.: 2100 x 1450 x 1200 mm - walls and roof made of sandwich material - floor made of anti-slip screen-printed board - auxiliary frame for mounting on chassis longitudinal beams - 1 x aluminum roller shutter in the rear, across the entire width and height - each side: 1 roller shutter (approx. 800 mm wide) - including airline rails mounted on the inside of the floor - rotating beacon with warning marking - interior LED lighting switchable via its own switch in the driver's cab - roof rack mounted on the box body as a ladder holder - welded from steel profiles and hot-dip galvanized - vertical tiller on the right and left for attaching the load - with airline rails for quick load securing, storage location: Gondelsheim hall Dolraeuytzyjwdzocg

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Djlrsfr T Emeawdzjcg Just contact us.

Condition: used, mileage: 10 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: other, axle configuration: 1 axle, first registration: 05/2024, next inspection (TÜV): 05/2026, color: white, driver cabin: other, suspension: other, brakes: other, Year of construction: 2023, mast type: standard, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, traction control, truck registration, Cruise control, 6-speed gearbox, Drive type: Front-wheel drive, Spare wheel with driving tires, On-board computer, Air conditioning, Soot particle filter, Central locking with remote control, Bumpers in vehicle color, Audio system: Radio with USB and Bluetooth hands-free system, Parking pilot system, Audio system 13: Digital radio reception (DAB / DAB+) with 4 multifunction display, Cabin filter: pollen filter, Low-emission according to Euro 6d emissions standard, Heatable windscreen, Tire repair kit, Windscreen wipers with intermittent control, adjustable, Audio system 21: Digital radio reception (DAB / DAB+) with 8 multifunction display, Sliding door loading/passenger compartment right, Front fog lights, Exterior mirrors electr. adjustable and heatable, Electric windows, Airbag driver's side, Anti-lock braking system (ABS), Daytime running lights LED, Parking pilot system front and rear, Radiator grille black grey, Airbag passenger side, Programmable battery monitoring, Cornering light in headlight, Trailer stabilization program (TSA), Front armrests, Hill start assist, Indicator light integrated in exterior mirror, Floor covering: Vinyl in load/passenger compartment, Brake assist, Sill lights, Electr. Brake force distribution (EBD), Electron. Stability Program (ESP), Electron. Traction control, Euro 6, Driver's seat with lumbar support, Lockable glove compartment, Rear wing doors with glazing (opening angle 180 degrees), Rear window can be heated, Rear window wiper, Body/bodywork: Box body, Load compartment light LED, Load compartment protection package, Load compartment partition with window, Leather steering wheel, Height/length-adjustable steering column, Truck registration, Medium-high roof, Engine 2.0 ltr. - 77 kW TDCi KAT, Digital radio reception (DAB+), Radio preparation - 4 loudspeakers, Wheelbase 2933 mm, Front and rear mud flaps, Crosswind assistant, Visibility package 1, Seat package 13: Driver's seat (4-way adjustable) - Double passenger seat, Fabric, Start/stop system, 12V socket in the charging/driving ... Subject to alterations, prior sale and errors excepted Dolrawdjqwxblezscg

Condition: used, mileage: 609 km, power: 9 kW (12.24 HP), Year of construction: 2022, First registered:07.09.2022_____Addax MT15n - 10.5/1 -72V LiFePO4 (14400 Wh) - 110km - 60km/hUltra-high-performance lithium/iron/phosphate (LiFePo) battery memory effect - includedBattery heatingRemote diagnosis - 4G vehicle monitoring,Online troubleshooting with factory supportClosed glass cabin, cigarette lighter,lengthwise adjustable driver's seat, 2 large shelves and interior lightingLeft-hand drive with driver's seat (left) and passenger seat (right)Color: white (RAL 9016)All-season tiresEuropean road approval: N1Charger LiFePo 220V 16A (maximum charging time 6.5 hours)Special equipmentPower steering Webasto auxiliary heating AirTop 2000 Rotating warning light Radio double DIN with Bluetooth, AUX hands-free system and rear view camera Hill start assist Lockable tool box Trailer hitch Fire extinguisher Safety set (first aid kit/warning triangle/safety vest) Additional battery and charger Three-way tipper incl. additional battery and charger Grid attachment with pendulum, Storage location: 54595 Prüm Dcjlrsibghhoawdzeg

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net Dcjlrasfr T Eqswdzog side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Djlsfn Ndcsrawdzecg Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Dslrawsfn Nddjdzecg Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.