Used Pegas Gonda 290X290 X-Cnc-Lr-1500-F for sale (58,523)

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. Doliomrxznollptekl saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Dkjlilswd I Svslptel Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: used, Functionality: fully functional, Year of construction: 2003, operating hours: 6,794 h, load capacity: 2,000 kg, lifting height: 4,900 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,240 mm, fork carriage width: 1,042 mm, fork length: 1,150 mm, total length: 2,450 mm, drive type: Elektro, construction width: 1,040 mm, net weight: 2,650 kg, Electric 4-Wheel Forklift Load Center: 500 Fork Width: 100 mm Fork Thickness: 35 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Front Tires Type: Super Elastic Front Tire Size: 200/50-10 Front Tire Condition: 40 - 60% Rear Tire Type: Super Elastic Rear Tire Size: 150/75-8 Rear Tire Condition: 40 - 60% Dslillpovtuytotekl Battery Voltage: 48V Battery Condition: 40 - 60% Sideshift, Fork Positioner, 3rd Valve, Front Work Lights, Full Cab, Full Free Lift

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Djlilswa R Npolptokl Turning diameter 340 mm Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, - Capacity 1570 x 4.5 mm Doliogg Nv Iollptokl - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller - Brake motor - Emergency stop - Documentation - 400V

Condition: used, Functionality: fully functional, machine/vehicle number: 611801000459, Year of construction: 2007, operating hours: 9,000 h, load capacity: 1,400 kg, lifting height: 9,300 mm, free lift: 3,140 mm, fuel type: electric, mast type: triplex, construction height: 3,700 mm, fork length: 1,150 mm, drive type: Elektro, Reach Truck Dolillpjwhtgyotskl VIN: 611801000459 Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Good Battery Voltage: 48V Battery Ah: 620Ah Battery Type: PzS Sideshift, 3rd Valve,

Condition: new, Year of construction: 2025, Technical data Control system: Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map Working area: X 600 x 900 mm Y 3000 x 12000 mm Gate clearance and Z axis range: 100-1000 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing: Trapezoidal rails, Bosch Rexroth 25 Speed: Up to 120 m / min Acceleration: Up to 1G Program resolution: up to 0.0001mm Positioning accuracy: 0.01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 2 kW to 36 kW powered by an inverter Dolillsn Hq Huoptokl Tool taper: ISO30 lub HSK63 ER32 Maximum speed of the electro-spindle: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation integration with an industrial robot Table type: T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Delillovzy Dtjptjkl Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: Jung Heinrich Type: Esmena Included in delivery: Pallet rack upright, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Incl. cross and diagonal braces, Foot plates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm Djljwbf Amoillptjkl Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, controller model: 21i MB, table width: 625 mm, table length: 825 mm, overall weight: 9,000 kg, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB Dkelowa R Ileillptjl If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, mileage: 58,399 km, power: 159 kW (216.18 HP), first registration: 06/1986, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 06/2025, gearing type: mechanical, total width: 2,500 mm, total height: 3,300 mm, Equipment: ABS, DLK 23-12 turntable ladder / Metz body, ladder length: 30.1 m, ladder set: 4-part, maximum load: 2 people / 180 kg, rescue height: 30.6 m, analog load indicator with multi-function display, tilt scale, 6 x equipment compartments, 4-way hydraulically extendable and supportable support, support widths front and rear: min. - max.: 2700 - 4500 mm, auxiliary drive, ABS, differential lock rear, static driver's seat - Isringhausen, passenger double seat, pop-up window, rear wall window, halogen fog lights, 2 x rotating beacon, compressed air horns on driver's cab roof, leaf spring suspension, operating hours: 1218, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us! Dksliljv E Ua Delptjl

Condition: used, Year of construction: 2021, 6000 W at 20°C water and 32°C ambient temperature. Dimensions (L/W/H): 55 x 55 x 140 cm Dkslijvvi E Ajllptol Storage location: Supplier

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° Dkslilowa Rvpslptsl B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2011, Machining size in X-direction: 2770 mm Machining size in Y-direction: 1220 mm Machining thickness (Z dimension): 80 mm Machine design: Gantry machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector-controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changing stations: 10 Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Grid table Stop system: Stop cylinder Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety protection: Safety mats Storage location: Nattheim Deliovvi Htellptekl

Condition: used, Year of construction: 2004, Storage location: Nattheim Dslovvi Hyoillptokl

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Dkjlilovvi Iqslptel

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Storage location: Garbsen Dkjliovvi Iwsllptjl

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Djlillovvi Nbsptskl

Condition: used, Year of construction: 1997, 4-axis machine with 18 kW water-cooled main spindle. HSK F63 chuck X = 4750 mm Y = 1250 mm Z = 200 mm. Maximum speed: 18,000 rpm. 12-station X-axis grooving saw. 4-station drilling head in a 17-spindle spindle. Central lubrication. 17 vertical drilling spindles, completely renewed in 2019. Smooth table. Positioning aid. Stop rows. Pendulum machining. 2 vacuum pumps. All plug-in cards for the control system replaced in 2022. WoodWOP 4.0 tools. Optional: lock case cutter unit, door hinge drilling unit, saw blade unit, 4-spindle unit. Very well-maintained condition. Dslillevvi D Eeptskl Storage location: Customer

Condition: used, Year of construction: 2001, Max. edge band thickness: 0.2 - 12 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Min. workpiece width: 70 mm Feed speed 1: 12 m/min Heat-up time: approx. 8 min Joining unit: Yes, with 2 milling units Automatic roll magazine: Yes Trimming shears up to: 3.0 mm Solid edge magazine: Yes Gluing: Glue pot with granulate on top Trimming saw: Yes, double trimming unit Flush trimming unit: pneumatically adjustable Chamfer and radius milling unit: pneumatically adjustable with interchangeable motors Rounding unit: pneumatically adjustable (corner rounding) Profile scraper: pneumatically adjustable Flat scraper: Yes, scanning Buffing unit: oscillating Unit display: Digital Control type: Section control/PLC Operation: Screen/PC control Extendable Roller support: Yes. Protective cover: Yes. Working height or feed table height: 800 mm. Approx. weight: 2100 kg. Dimensions: 5300 x 950 x 1300 mm. Motor power: 12 kW. Storage location: Customer. Dslevvkdasillptokl

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Delilovvi Nzjlptokl

Condition: used, Year of construction: 2018, Incl. tool / without angular gear Machining area: Travel of the axes: X=4000 mm Y=1670 mm Z=500 mm Working area: X=3300 mm Y= 1250 mm Z=250 mm Passage height C-axis / fourth axis 0-360° for milling spindle 4-way linear tool changer, traveling in X / changing station for 4 tools / units Milling spindle 12 kW HSK 63 / 24000 rpm Automatic central lubrication 12-way linear tool changer Drilling head DH 16 4H 2S Vertical 12 spindles: 7 spindles in X direction and 5 spindles in Y direction Horizontal 4 spindles: 2 spindles in X direction and 2 spindles in Y direction Pre-stroke = 70 mm, max. drill length = 70 mm and shank D=10 mm 2 Grooving saws - each in X and Y directions, max. saw blade diameter 120 mm. Woodflash software. Storage location: Nattheim Dkelillovvi N Ueptjl

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Dkslisvvi Rfellptsl

Condition: used, Year of construction: 1999, Storage location: Nattheim Dkslilljvvi Rxoptjl

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Storage location: Nattheim Dkolillpsvvi R Estol