Used Atlas-Copco Qas 100 for sale (41,002)

Condition: new, Functionality: fully functional, total height: 4,550 mm, overall weight: 1,200 kg, tank capacity: 15,100 l, inner diameter: 2,507 mm, TECHNICAL SPECIFICATIONS - Vertical cylindrical on feet - Off-centre conical dome - Conical bottom with 38% slope - Interior and exterior finish: glazed 2B - Off-centre chimney Ø 400 mm and height 300 mm - 316L ELICA stainless steel anti-retention top flap - 3 single male DIN 80 connections on the dome - Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve - 5 lifting rings, including 1 at the foot of the tank - Support + manufacturer's plate - 1 single male DIN 65 ferrule connection - 1 single male DIN 65 ferrule connection - Earth connection - 5 thermal regulation rings with water I/O sleeve: 4.75 m2 - 5 heating rings with water I/O sleeve: 4.75 m2 - Maximum pressure on coil belt: 2.5 bar - Total temperature control surface area: 9.5 m2 Fpjlnswaliqe Hqidog - Temperature control ratio per 100 HL: 6.31 m2 - Truncated cone spigot + stainless steel faceplate for agitator mounting - Full stainless steel plug + EPDM seal to close the agitator spigot - Total drain pipe + male at end of pipe DIN 65 - 4 external tank feet, height 800 mm - 150 x 5 stainless steel flat reinforcement belt - 4 levelling jacks - 4 304L stainless steel floor plates DIMENSIONS - Diameter: 2507 mm - Height : 4550 mm - Weight : 1200 Kg

Condition: excellent (used), Year of construction: 2007, operating hours: 64,000 h, Functionality: fully functional, machine/vehicle number: 20306061, pressing force: 100 t, throat depth: 415 mm, distance between stands: 2,700 mm, bending length: 3,110 mm, stroke distance: 200 mm, Amada Astro II 100 NT bending cell. Includes loading robot, bending robot, repositioning device with extra support, loading table, conveyor for unloading pallets (currently disconnected), safety fence. Comes with multiple loading and bending grippers, both clamp and vacuum type. Worksheet loading both as stack or vertical loading unit. Bending force: 980kN Table length: 3110 mm Stroke: 200 mm Open height: 500 mm Worksheet thickness min: 0.6 mm Worksheet dimensions min: 150 x 150 mm Worksheet dimensions max: 800 x 1000 mm/ 300 x 1800 mm Fsln Hewakiceqidopg Worksheet mass max: 20 kg (including bending robot gripper/ loading robot gripper) Serviced by local Amada representative.

Condition: used, mileage: 651,784 km, power: 375 kW (509.86 HP), first registration: 03/2014, overall weight: 26,000 kg, fuel type: diesel, color: yellow, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space width: 2,480 mm, loading space length: 6,500 mm, loading space height: 960 mm, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Structure/crane Flatbed with aluminum side walls, dimensions 6,500mm x 2,480mm x 960mm, Atlas crane model 186.3, year of manufacture 2014, 2 point support, reach/load capacity: 5.9m=3,200kg, 8.5m=2,120kg, 11.2m=1,600kg, high stand, stone tongs can be purchased for an additional charge. Equipment: L ClassicSpace, suspension: air / air (full air), trailing axle steered, liftable, axle load front axle 8.0 t, tow bar with brake connection standard and DuoMatic, compressed air horn, 12-speed gearbox - type: G 281-12, fuel tank: 630 litres aluminum, side windows rear left / right, seats in the driver's cab: comfort driver's seat with massage function, outside sun visor, sun blind side window, driver's door, manual lifting roof (steel), air conditioning, additional heating (water) Technology: Audio system: CD radio comfort (Bluetooth), Fleetboard preparation, CB radio, cool box / refrigerator, Safety / environment: Retarder, rear axle differential lock, bi-xenon headlights, EURO 5 emissions standard, Other: Engine 12.8 litres - 375 kW R6 diesel (OM 471), permissible Total weight 26.00 t, Mercedes Benz service maintained (11 service entries), last in 09/2022 at 623,723 km, service brake renewed in 2022, payload 10,800 kg according to registration certificate, Your reliable partner for everything to do with automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz since 1971. The Behnke Commercial Vehicle Center constantly has around 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We continuously offer you attractive financing options at favorable special conditions. If you are interested, we would be happy to make you an individual offer! Fpeln Hqisvcgqcodjg Trade-in of your commercial vehicle/construction machine is desired. If a new TÜV inspection is desired, we would be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the Internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/guarantee for typing and data transmission errors. The equipment listed may need to be checked separately. Subject to errors and prior sale.

Condition: used, Functionality: fully functional, Length: Diagonal: 200 cm Horizontal: 100 cm Width: 30 cm Fpelnov H Nn Eo Hqideg

Condition: good (used), Year of construction: 2007, MULTI-STAGE PRESS ORMA NPC DIGIT 6/100 AS-BO 5 INTERMEDIATE PLATES DIMENSIONS 2500x1300mm CRUSHING BETWEEN PLATES 110mm HEATING 58KW OVERALL DIMENSIONS 3500x1700x2700mm WEIGHT 5800KG Fpslnjvtx Alj Hqidjg

Condition: good (used), Year of construction: 2000, Telsonic Type:M2. 100 Year approx, 2000 Fpslohhntnon Hqidjg

Condition: good (used), power: 18 kW (24.47 HP), fuel type: diesel, color: other, Year of construction: 2022, operating hours: 500 h, Field of application: Construction Fpjlevlwvnsn Hqideg Empty weight: 1.060 kg Chassis type: articulated Make of engine: Kubota Number of owners: 1 Technical condition: good Visual appearance: good Production country: BE Please contact Thomas Van de Putte for more information

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System Fpolev T Nqyjn Hqidjg - Machine Feet

Condition: used, mileage: 88,508 km, power: 375 kW (509.86 HP), overall weight: 60,000 kg, fuel type: diesel, color: blue, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro5, Year of construction: 2013, first registration: 02/2013, next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, Internal vehicle number: FG200323 German vehicle On our yard in Kaufungen - Kassel, available immediately Fpolnekt N Srj Hqidog More INFO at * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English)   Axles, tires, brakes Steering axle YES Weight and payload L/W/H 13846 mm Empty weight 58920 kg DMC 60000 kg Appearance and options ABS YES Electric windows YES Electric mirrors YES Heated mirrors YES Radio YES Air conditioning YES Day cab More information Max. load capacity 100 t with a reach of 2.5 m Load capacity 0.9 t with max. reach of 58 m max. standard reach 60 m min. standard boom 11.65 m max. drawbridge 22 m load moment 295 kNm chassis engine 375 kW body engine 110 kW driving speed 85 km/h number of axles 5 wheels / drive / steering 10/8/10 axle load 12 t standard tires 16.00 R25 Mercedes-Benz engine manufacturer engine type OM502 LA engine power 375 kW rotation at a maximum torque of 1300 rpm maximum torque 2400 Nm number of cylinders 8 emissions level EUROMOT/EPA/CARB Tier 4i errors excepted   we are happy to accept your used vehicle in payment. Financing possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: good (used), Functionality: fully functional, Length: Diagonal: 200 cm Horizontal: 100 cm Width: 30 cm Crossbeam height: 4 cm Fpeln Hqjv H Dk Ijideg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails Feln Hev D Nu Teqidspg -Manufacturer: Paslode, strip nails paper bound 3 boxes -Type: 3.4 x 100 Smooth Bright .: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H340 mm -Total weight: 47.1 kg

Condition: good (used), Year of construction: 1993, Functionality: fully functional, Grinder Brand Kolbe Model SW 100 Fjln Hqewaudkjidopg Number: 68 0579 Year of construction: 1993 Power 3 kW Voltage 380 V, 3 Ph, 50 Hz, 6.7 A Sieve diameter: 100 mm Dimensions: 500 mm x 900 mm x 1100 mm

Condition: good (used), The scope of delivery includes: 01x stand protection, used Manufacturer: Meta (Thyssen) Material color: orange Total height: approx. 1,255 mm Total width: approx. 120 mm Inner width: approx. 101 mm Suitable for frame profile: 100 mm Material thickness: approx. 4.0 mm Total depth: approx. 60 mm Felov Dtqren Hqidepg Deflector height: approx. 50 mm Leg dimensions: approx. 80 x 80 mm Original clip tabs Weight | piece: 13.42 kg. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Fpeln Hqierazzrsdeg

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Fjln Hqiou N Slvsdjpg Max. panel length: 3200 mm

Condition: good (used), Falch Trailjet 100, 2500 bar, 20 l/min, 2008, good condition, pump completely overhauled 300 hours ago, invoice for €15,000 included, accessories are optional Fpjln Hev S Ix Tjqideg

Condition: used, LECO LM - 100 AT Small load and micro hardness tester Year of construction: 2010 Test force ranges from 0.001 - 2 kgf Manual or automatic turret with up to 4 objectives and 2 test diamonds simultaneously PC is included in the scope of delivery --> Software could not be tested as the graphics card is missing. You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping company for you. organize! Fsln Hqertn D Ieidspg You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Functionality: fully functional, Refrigerated vacuum tumbler Brand IBB Model Schinkomat 100 Serial number: 811 Power 1400 W Voltage 380 V, 50 Hz Pressure: 1-10 bar Fpjljwarwzjn Hqidog Busch vacuum pump, KB 0010 D Capacity: 10 m³/h Lúnite Hermetique refrigeration compressor Type: CAE9460Z Refrigerant: R404A Overall dimensions: 1570 mm x 750 mm x 1220 mm

Condition: used, mileage: 119,000 km, power: 162 kW (220.26 HP), overall weight: 10,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, loading space width: 2,150 mm, loading space length: 3,300 mm, loading space height: 400 mm, Year of construction: 2017, first registration: 10/2017, Equipment: ABS, crane, Iveco Eurocargo 100 - 220 / 4x2 Platform 3,30 m + CRANE Imported / accident-FREE IN GOOD CONDITION! YEAR OF PRODUCTION: 2017 MILAGE: 119 000 km EQUIPMENT ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? AIRCONDITION ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 330 x 215 x 40 cm (L x W x H) TOTAL WEIGHT: 10 000 kg Fjln Hswa Hubjqidepg CAPACITY: 5 000 kg TIRE SIZE: 225/75R17,5 WHEELBASE: 370 cm SUSPENSION: SPRING CRANE: PALFINGER PC 1500 A TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref. nr: 57079

Condition: used, Year of construction: 1972, Macmon M 100 C tool milling machine , rigid table , MK 4 spindle holder. Ready for operation, can be demonstrated under power by arrangement. Fpjlnergpluo Hqidjg

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Fjljrl Utben Hqidepg Max Panel Length: 55 mm

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Fjln Hqijv Azb Njdspg

Year of construction: 1978, Condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Fpslnohtfubo Hqideg

Year of construction: 1997, Condition: good (used), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital display from training department , rigid table , SK 40 spindle mounting. Accessories : Electric spindle guard , div. collets and cutter arbors. Good working condition , can be demonstrated under power by arrangement. Fpeln Hehgmmzeqidog

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Fpoln Hev Azbpsqideg