Used Atlas-Copco Qas 100 for sale (41,002)

Condition: used, Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: Fgelq Iwdjixmz Hozob - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Piston rod: Ø 25 mm -Holes: Ø 25 mm / Distance: retracted 355 mm -Dimensions: Ø 77 x 420 mm Fgjlq Iwev Nhc Tjdzeb -Weight: 6.9 kg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, Functionality: fully functional, pressing force: 100 t, bale weight: 1,400 kg, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 36,000 kg, oil tank capacity: 1,300 l, nominal current: 238 A, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Felsvf E Avsq Iwdzogb Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Fjlq Iwsu Nfh Dedzogb Optional on customer request completion possible. i.D. *

Year of construction: 2010, Condition: refurbished (used), Bizerba TU100 summing table after renovation Fgjlq Iwdei Drwqezob

Condition: ready for operation (used), Platinum thickness: 0.5-4.5mm, component height: top max. 16mm, bottom max. 30mm, components: Chip, MELF, SOT, SOIC, TSOP, PLCC, QFP, BGA, LCC, µBGA etc., Incremental axes X: 0.001mm, Y: 0.001mm, Z: 0.02mm, theta: 0.045°, connected load: 2500W, operating temperature: 18-30°C, control: microprocessor control with CAN interface, operated on PC with Windows® 7, vision system: ESI CorePlace®, automatic board alignment, complete component identification, inspection of solder pads, pin positions, component position, BGA ball count etc., weight: 700kg. On-site inspection is possible. Fslq Iwdewb E Shszegb

Condition: used, Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec Fgslq Iwdoixmz Uozsb working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Piston rod: Ø 37 mm -Holes: Ø 25 mm / Distance: retracted 365 mm / 360 mm -Number: 2x cylinders available -Price: per piece Fslqev I S Iqj Iwdzsgb -Dimensions: Ø 82 x 440 mm -Weight: 7.7 kg / 7.8 kg

Year of construction: 2008, operating hours: 85,654 h, Condition: repair required (used), Functionality: not functional, A defective 17m³ climate chamber is for sale. The compressor of the pre-cooling stage is probably defective (see photo, red X), a detailed inspection has not been carried out. The system is being sold defective. Temperature range: -60°C to + 100°C Humidity range: 10 to 95% r.H Dew point range: +5°C to +89°C Felq Ijvmwycewdzjgb The system can be inspected by prior appointment. Deployment takes place at ground level through sufficiently large doors, here assistance can be offered, otherwise the buyer is responsible for deployment and removal.

Condition: good (used), Year of construction: 2017, operating hours: 5,750 h, Functionality: fully functional, power: 110 kW (149.56 HP), input voltage: 400 V, filling opening width: 1,020 mm, filling opening length: 1,500 mm, UNTHA RS-100 Shredder Main shaft speed: 17.3 rpm Side shaft speed: 28.0 rpm Chipping disc width: 38 mm Drive power: 2x55 kW, 400 V, 50 Hz Fgolov R Hc Ijq Iwdzob Round screen perforation: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring: complete Incl. hopper + pusher and base Clean machine, checked, always maintained, 1 owner!

Condition: used, overall weight: 36,000 kg, maximum load weight: 27,980 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, first registration: 07/2023, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 92 cubic meters, galvanized chassis, "Cargo Floor" floor with 21 boards approximately 10 mm thick, stainless steel wear plate at the rear under the moving floor, complete emptying (rolling bulkhead), push-in/push-out function, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, load gauge, LED side marker reflectors, folding rear light guards, ABS, EBS, BPW axle(s), disc brake system, air suspension with lifting/lowering device, lift axle, "Jost" landing gear, spare wheel holder for 2 spare wheels, vehicle can be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Fsljv Nfcqsq Iwdzogb

Condition: ready for operation (used), Cycle time: 1.16s/QFP with Area CCD camera, 0. 85s/chip with Closed Loop Electromechanical Alignment, optimal placement rate: 3125 on IPC 9850 with Area SCC & LCC cameras, 4200 on IPC 9850 with CLEA, nominal placement rate: 2500-3500cph (components per hour), processable component types: 0201-Chip, MELF, SOT, SOIC, TSOP, TNT, PLCC, QFP, BGA, µBGA, LCC, field size: 42x42mm, fine pitch: Up to 0.4mm (16 mil), Tool change station: 12 nozzle positions, Heads: single gantry with two independently controlled pipettes, Assembly accuracy (X/Y) 3σ: 50µ with Area CCD camera,100µ with Closed Loop Electromechanical Alignment, PCB dimensions (X/Y): 30-330x30-450mm, PCB alignment: fiducial detection by ESI CorrectPlace® incl. Teach-in for drill holes or unusual contours, loading and alignment time: approx. 2.8s, number of axes: 2, length: 1700mm, width: 1500mm, height: 2200mm, weight: 450kg without feeder. On-site inspection is possible. Fjlq Iwjwb E Snjdzsgb

Year of construction: 2023, Condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service. Fjlq Iwdsgay Nyjzogb

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD250B40/28-100 -Stroke: 100 mm -Piston rod: Ø 28 mm / M16 x 1.5 -Hole: Ø 25 mm Fgjlq Isunn I Njwdzsb -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 88 x 400 mm -Weight: 5.9 kg/pc.

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: A5137, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Fgolq Iwdowb A Dzszeb Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 879 h, lifting height: 2,900 mm, mast type: duplex, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,300 mm, Field of application: Internal logistics Lifting capacity: 1.000 kg Technical condition: very good Visual appearance: very good Serial number: 6499264 Fgolq Iwdowb Amvszsb Please contact PEDRO GÓMEZ for more information

Year of construction: 2000, Condition: excellent (used), Maschinen-Details Lagernummer 1105-03787 Maschinenart Bearbeitungszentrum - Vertikal Fabrikat TRENS Fjlq Ioiwgi Nowdzjgb Typ MC 100 VA Baujahr 2000 Steuerungsart CNC Steuerung HEIDENHAIN TNC 426 Lagerort FRANKREICH Ursprungsland Tschechei Lieferzeit sofort Frachtbasis ab Lager, frei verladen Lkw Technische Details x-Weg 1015 mm y-Weg 610 mm z-Weg 508 mm Tischgröße 1080 x 580 mm Spindelaufnahme ISO 40 Bohrleistung in St 60 - Vollbohren 45 mm Gewindeschneiden bis M 24 Drehzahlbereich - stufenlos 20 - 8000 U/min Vorschübe - längs/quer/senkrecht 1 - 5000 mm/min Eilgang 20 m/min Entfernung Spindel/Tisch 100 - 608 mm Anzahl der Werkzeugmagazinplätze 40 Werkzeugdurchmesser bei voller Bestückung 80 mm Werkzeugdurchmesser bei 2 Freiplätzen 125 mm Werkzeuglänge max. 380 mm Werkzeuggewicht max. 7 kg Werkzeugwechselzeit 7 sec Spindel 11/16.5 kW Steuerung HEIDENHAIN TNC 415 Gesamtleistungsbedarf 30 kVA Maschinengewicht ca. 5,7 t Zusatzinformationen DoKUMENTE heidenhain tnc 426

Condition: good (used), The scope of delivery includes: 01x U-profile, used Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Long hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | piece: approx. 26.31 kg Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: Fgelq Iev Ia Rmowdzjb This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm Fslq Ist D Nz Aowdzsgb shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, mileage: 434,746 km, power: 162 kW (220.26 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,400 mm, overall weight: 7,490 kg, empty load weight: 4,620 kg, maximum load weight: 2,870 kg, first registration: 08/2002, next inspection (TÜV): 09/2025, loading space length: 4,000 mm, loading space width: 2,160 mm, loading space height: 500 mm, emission class: euro3, color: green, driver cabin: day cab, suspension: other, number of seats: 3, total length: 5,900 mm, construction height: 2,600 mm, fuel: diesel, Equipment: ABS, trailer coupling, - Rare MAN 8.224 L2000 6-cylinder, Atlas ARK52 A city roll-off tipper (articulated boom) Fgjlqswa D Nij Iwdzob - Including container, interior dimensions: 4m x 2.16m x 0.5m with 6 load securing eyes, net hooks, folding side walls, and a swinging/drive-over tailgate - Vehicle in one owner since 2007, MOT/AU 09/2025 - Euro 3 - ABS - Analog tachograph - Rear axle with air suspension - Manual transmission - Differential lock - Rotating beacon, work light, reversing light - Gross vehicle weight: 7490kg, NL 2870kg - Tires 235/75R17.5, remaining tread 6-7mm - Trailer hitch 11235kg with air connections + Duomatik - Hydraulic tipping connection for the trailer - Mechanical Extendable bumper - Subject to errors and prior sale... VAT deductible, ABS, trailer coupling, power steering, cab: local sales, hydraulic tipping, previous owners: 2, emissions class (NFZ): 71 Euro 3, diesel, rear-wheel drive, particulate filter sticker: 2 - red

Year of construction: 2006, Condition: ready for operation (used), This Safan E-BRAKE 100-3100 TS 1 press brake was manufactured in 2006. Consider the opportunity to buy this Safan E-BRAKE 100-3100 TS 1 press brake. Contact us for further details regarding this machine. Fjlq Iwdev Tq R Iszjgb Application Types Bending

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 63, total length: 1,070 mm, total height: 1,850 mm, spindle speed (max.): 16,000 rpm, overall weight: 1,300 kg, Dimensions: 1.07 m x 2.00 m x 1.85 m Control: Leste 8 Spindle speed: 16,000 rpm Number of axes: 5 Travel range: 74 cm x 82 cm Module size: 0.15 - 0.5 Fgelq Iowbuf Rjwdzob Tailstock: Spring-loaded Interchangeable swivel table Cutting oil tank capacity: 25 liters Lubricating oil tank capacity: 35 liters Hydraulic oil tank capacity: 3 liters

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Year: 2002 Weight: 9.500 Kg Rated force: 100Tn Type: Pneumatic clutch eccentric Stop position: 580mm Closing height: 450mm Foleuif Tksq Iwdzogb Maximum flywheel RPM: 500mm Travel: 13-130mm Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Safety distance: 486 mm

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. Fslqoizxbie Iwdzjgb - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: new, Capacity: 100T Type: Self-aligning Felq Iovtycmswdzsgb Minimum diameter: 1000 mm Maximum diameter: 5500 mm Wheel dimensions: 500 x 220 mm (Diameter x Width) Wheel covering: Polyurethane rubber Turning speed (Min.-Max.): 100 - 1,000 mm/min. Motor power: 5.5 KW Variator: Danfoss Electrical components: Schneider Includes: 1 motorized turner + 1 idle turner Control unit with 6-meter extension and digital display with the turning speed.