Used Ajce Ab-450M for sale (87,522)

Condition: ready for operation (used), Immediately available from the customer's factory (machine in use) Subject to prior sale and availability PLATE-EDGE-MILLING-MACHINE / PLATE-EDGE-MILLING-MACHINE PLATE-EDGE-MILLING-MACHINE MADE BY / MADE BY MODEL / TYPE YEAR OF PRODUCTION/ NEW 1984 approx./approx ZUSTAND/CONDITION Betriebbereit / ready for use LIEFERZEIT / DELIVERY-TIME SOFORT / IMMEDIATELY Längsvefahrweg X Travel longitudinal X 15,900 mm Horizontal feed Z Horizontal travel feed Z 790 mm Vertical feed Y Vertical travel feed Y 500 mm Swivel range of milling spindle Swivel of milling spindle +/- 45 °/degrees Drive power Power 50 kw Milling spindle diameter Milling spindle dia 160 mm Tool holder Taper ISO 50 DIN 2079 Spindle speeds stepless Spindle speeds stepless 50-500 rpm Weight of machine Weight of machine 23.000 Kg Djb Ha Devdx S Uj S Iokl

Year of construction: 2012, Condition: good (used), Generator, emergency power generator, generator, aggregate, power generator, power generator, emergency power generator, generator set -Manufacturer: SAB, generator set type D-4107 F -previous use: ship Dkjb Haeh I Ez De D S Isl -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Remark: without control, without cooling -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min Djbevb Ixlj Ha D S Iekl - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Year of construction: 1999, Condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Deb Hsuui Ecja D S Iokl

Condition: new, Year of construction: 2025, Functionality: fully functional, The Aberlink Azimuth CNC Coordinate Measuring Machine (CMM) is the largest model in our range and reflects over twenty years of experience and excellence in developing innovative metrology. Dksbjvwbabj Ha D S Isl It has been specifically designed for the precise measurement of large and heavy workpieces weighing up to 6000kg. The revolutionary bridge design incorporates aluminium honeycomb core panels originally developed for Formula 1 and aerospace. This design offers a remarkable stiffness to weight ratio that improves both the performance and speed of the Azimuth. With travels of X 1200mm, Y 2000 or 3000mm and Z 1000mm and volumetric accuracy of up to (2.6 + L/250)µm, the Azimuth ensures the highest precision. The scale resolution is 0.1µm. A specially designed load plate system allows heavy components to be placed directly on the granite base, transferring the load directly to the floor without affecting metrological performance. The user-friendly Aberlink 3D measurement software enables a short training period, so that even without prior knowledge, precise measurements can be taken. Free software updates ensure that the system is always kept up to date.

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Dkeb Haor A Eifo D S Ijl

Condition: new, Year of construction: 2025, Functionality: fully functional, Aberlink's Horizon 1000 CNC Coordinate Measuring Machine (CMM) builds on the success of the Horizon 800, offering extended travels of X 1000mm, Y 1200 or 2000mm and Z 800mm. It uses frictionless linear actuators that provide fast, smooth and silent movement, making it particularly suitable for use in inspection rooms. Dsb Ha Devwa Uqe S Iokl The design has been optimized to improve the stiffness to weight ratio of the bridge assembly, with the Y-axis rail increased by 200mm to increase rigidity. Drive is through the center of gravity, improving both speed and accuracy. Thermal isolation of the motors from the metrological structure prevents thermally induced measurement errors. With a volumetric accuracy of up to (1.75 + L/250)µm and a scale resolution of 0.1µm, the Horizon 1000 ensures the highest precision. The user-friendly Aberlink 3D measurement software enables a short training period, so that precise measurements can be carried out even without prior knowledge. Free software updates ensure that the system is always up to date.

Condition: ready for operation (used), Year of construction: 2015, Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible. Dsbeu E T Tmo Ha D S Iekl

Year of construction: 2016, Condition: ready for operation (used), Crane carrier profile: HB250, load capacity: 800kg, span: 7200mm, number of trolleys: 1, control: manual floor operation, number of wheels: 16, wheel diameter: 62mm, tare weight: approx. 315kg. Documentation available. Dkjb Ha D Set Uugfj Ijl

Year of construction: 2017, Condition: ready for operation (used), Connected load: 30kW, length: 9060mm, width: 4000mm, height: 2900mm, includes ultrasonic cutting unit, conveyor unit, switch cabinet, protective elements, spare parts and documentation, on-site inspection is possible. Debjriuq Eo Ha D S Iekl

Year of construction: 2019, Condition: ready for operation (used), A Johnson Controls/Sabroe cold storage room with two LP-ChillPAC 108LV chillers is available. Refrigerant: R717, charge weight: 2x120kg, cooling capacity: 2x310kW, pressure unit volume: 4510l. Low pressure side: max. operating pressure: 16bar, test pressure: 17.6bar, operating temperature min./max.: -30°C/+40°C. High pressure side: max. operating pressure: 22bar, test pressure: 24.2bar, operating temperature min./max.: 0°C/+150°C. Documentation available. On-site inspection is possible. Dob Haeu Rc Spj D S Iskl

Year of construction: 2023, Condition: ready for operation (used), An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible. Debsulkumo Ha D S Iekl

Year of construction: 1983, Condition: ready for operation (used), A Naber (Nabertherm) curing oven with an overhauled control system is available. Internal dimensions X/Y/Z: 1000mm/1000mm/500mm, max. operating temperature: 1150°C, connected load: 63kW, control: Nabertherm P 300. An on-site inspection is possible. Debovuad Ts Ha D S Iskl

Year of construction: 1995, Condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a scenker spring device. The motor and drive of the machine are defective. Documentation available. Dksb Ha D Sovripmo Iol

Year of construction: 2006, Condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Dkjb Ha D Sjt Amc Ij Ijl

Condition: ready for operation (used), Year of construction: 2007, A two-part Sheidt transformer station with two transformers is available. Rated power per transformer: 630kVA. Documentation available. On-site inspection is possible. Dkeboui R Rpj Ha D S Ijl

Year of construction: 2015, Condition: ready for operation (used), Was used for toast rolls, includes 2x pick & place robots ABB FlexPicker IRB 360 for grouping, IRC with PC processor, PC, monitor and visualization, Komatec vision system, Siemens S7, remote maintenance, operation on swivel arm, picker 1&2 suction grippers, various belts for product transport and frame with protection system. Dkebsrdhhye Ha D S Iol

Year of construction: 2010, Condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Djb Hasuy T Nde D S Iokl

Condition: ready for operation (used), Year of construction: 2014, There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) Kuka KR 140 L100-2 comp: Year of construction: 2008, operating hours: approx. 29000h. 3) Kuka KR 30-2: Year of manufacture: 2004, operating hours: approx. 53000h. 4) ABB IRB 1600-6/1,45: Year of construction: 2012, operating hours: approx. 25500h. 5) Kuka KR 30-2: Year of construction: 2011, operating hours: approx. 2000h. 6) ABB type: unknown: Year of construction: unknown, operating hours: approx. 1500h. 7) Kuka KR 140: Year of construction: 2006, operating hours: approx. 44000h, without control panel. All robots (except 7) including control unit and operating panel. Dkobetnclre Ha D S Iel

Year of construction: 1971, Condition: ready for operation (used), Sanding length/width: 450mm/300mm, workpiece height: 350mm, max. sanding wheel width: 50mm, weight: approx. 1500kg. Dksb Hott Dx Eoa D S Iol

Condition: ready for operation (used), Year of construction: 1959, There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible. Debotk Rwls Ha D S Iekl

Year of construction: 2001, Condition: ready for operation (used), An ESAB laser cutting system is available. Cutting range X/Y: 3000mm/17000mm, laser power: 4kW, material thickness range: 0.5mm-20mm, laser source: Trumpf, laser cutting head: luding bevel unit for optimum weld seam preparation. Documentation available. On-site inspection is possible. Dkjb Ha D Sovamq Rs Iel

Year of construction: 2015, Condition: ready for operation (used), A coolable (isolated) Fabdec milk tank is available. Volume: 10000l, length: approx. 3000mm, diameter: approx. 2200mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included. Dkob Ha D Sot Hxdle Isl

Year of construction: 1996, Condition: ready for operation (used), Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Dkobou Izrvo Ha D S Ijl

Condition: ready for operation (used), X-axis: 500mm, Y-axis: 150mm, Z-axis: 280mm, quill stroke: 55mm, throat depth: 185mm, table dimensions: 700x180mm, groove width: 12mm, weight: approx. 110kg, with base frame. Dkjbjumwh Ao Ha D S Ijl