Used Maho Mh400C for sale (515)

Condition: used, Year of construction: 2000, x-travel 1000 mm y-travel 600 mm z-travel 460 mm Control Sinumerik 810 D total power requirement 9 / 13 kW weight of the machine ca. 7 t dimensions of the machine ca. 3 x 3 x 3 m No. 5381: Vertical machining center DECKEL MAHO type DMC 103 V year of construction 2000 Sinumerik 810 D Working area: 1000 x 600 x 460 mm, drive power: 9/13 kW Cgslq Ijunugxo Uc Uot Machine table 1200 x 600 mm, 24-fold tool changer, chip conveyor, electronic handwheel, operating instructions. Miscellaneous: Spindle ISO 40, Speed range 1-10,000 min-1, feeds 0-30,000 mm/min, rapid traverse 30 m/min, 1st hand - only approx. 10,000 switch-on hours Space requirement see sketch Transport weight approx. 6.8 tons

Condition: excellent (used), Functionality: fully functional, Machining center - Universal DMG DECKEL-MAHO type DMU 50 eV / 5 axes with Heidenhain Millplus control Super condition !!! Technical data: >> Year of construction approx. 2000 >> Heidenhain Millplus control system >> 5-axis machine with B + C - axis SIMULTAN >> Travels X500/Y420/Z380 >> Total power requirement 40 kVA >>Tool holder spindle taper SK40 >> Max. spindle speed up to 18000 1/min >> Feed X, Y, Z 20,000 mm/min Rapid traverse X, Y, Z 50 m/min Dpoyvp >> Tool magazine: chain magazine 32 places (2x 16 places) >> NC rotary table diameter 500mm x 380mm, 7 grooves 14mm, 63mm distance >> Table load 200 KG >> Hydraulic clamping device >> Dimensions and weight: Machine space requirement including operation and maintenance Depth 5.0 meters Width 4.0 meters Height 2.6 meters Weight approx. 5000 kg Cgslq Iju A Dlzo Uc Uot >> Machine documents >> Coolant system >> abgel. Operating hours machine ON: 49838 Spindle run: 20508 Issj23A About the machine : We offer a machining center DMG DECKEL-MAHO type DMU 50 Evolution 5 axes with a Heidenhain Millplus contouring control. The machine is in very good condition. The axes and speed spindle run smoothly. Take the opportunity to inspect and try out the machine on site under power.

Condition: good (used), Year of construction: 2005, operating hours: 13,917 h, Functionality: fully functional, machine/vehicle number: 11590000083, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Bidding obliges the buyer to pick up the machine on time by the end of February. The machine can be viewed under operating conditions until February 6, 2025.  TECHNICAL DETAILS x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control type: Heidenhain iTNC 530 Spindle Max. spindle speed: 12,000 rpm Tool holder: SK40 Tool changer Available: yes Tool positions: 32 MACHINE DETAILS Space requirement: 25 m² Loading dimensions (L x W x H): 3.2 x 2.3 x 2.7 m Weight: 9.6 t Operating hours (as of week 45/2023): 45,746 h Spindle hours (as of week 45/2023): 13,917 h EQUIPMENT - Chip conveyor Colq I Ujvu A S Hjc Usgt - External coolant system - 50 x SK40 tool holders

Year of construction: 1992, Condition: used, serial number 82586 Control Heidenhain 234 x-travel 800 mm y-travel 500 mm z-travel 550 mm table size 900 x 600 mm Cgjlq I Usg U Nbxec Ust max. 3.000 U/min tool adaptor SK40 weight of the machine ca. 2,2 t

Condition: used, Year of construction: 2001, x-travel 630 mm Celq Ijt Ii Iwj Uc Ujgt y-travel 500 mm z-travel 500 mm Control CNC total power requirement 13 kW weight of the machine ca. 4,5 t dimensions of the machine ca. m

Condition: reconditioned (used), Functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC530, workpiece weight (max.): 600 kg, table width: 600 mm, table length: 800 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 64V LINEAR Machine after complete reconstruction. Spindle after regeneration and replacement of bearings BLUM tool measuring laser Control Celq Ijvwd Axj Uc Uegt Due to the restructuring of the company, we have for sale: FAST 3-AXIS MACHINE Manufacturer: DECKEL MAHO Type: DMC 64V LINEAR HEIDENHAIN 530 control Year of production: 2002 Table size: 800X600 Travel: X 640, Y 600, Z 500mm Weight of the workpiece: max. 600 kg General overhaul of the machine 12.2024 Spindle: SK 40 12000rpm Power S1/S2 13kW/19kW Tool changer: 30-fold HEIDENHAIN workpiece probe Tool probe: BLUM laser Receiver chips Machine in very good condition, After full renovation. Serviced. Machine in constant use.

Condition: used, Year of construction: 1977, x-travel 500 mm Cgolqjtqp U Ro I Uc Ujt y-travel 400 mm z-travel 400 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5*2,5*2 m No. 4030 Universal milling machine - not functional - to be used as spare part - Weight aprrox. 1800 kg Rigid table 800 x 400 mm3 separate feed motorsVertical milling head with quill feedSpeed range 40 - 2000 min-1 Working area: 500 x 400 x 400

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn machining center Condition used Year of construction 2001 Switch-on hours: 56376 Spindle hours: 26451 Technical Data: Speed: 18,000 1/min Features: - MillPlus control - 60-fold tool changer - 2-3 pallets Colq I Ueu Rnluoc Usgt - 2-fold pallet changer - Universal head - Geometry problem after crash (test protocol)

Condition: repair required (used), Year of construction: 2005, operating hours: 44,050 h, Functionality: not functional, machine/vehicle number: 2731660/C 0000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Colq I Ucsrl Rwxe Usgt Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 41901, Equipment: documentation/manual, For sale is a MAHO MH 400P milling machine in excellent condition Celqovrzras I Uc Uogt

Condition: used, Year of construction: 2002, x-travel 350 mm y-travel 240 mm z-travel 340 mm Control Siemens Type 810 D total power requirement 15 kW weight of the machine ca. 1,6 t dimensions of the machine ca. m Cgjlq Ist Hxc Ue Uc Uet

Condition: excellent (used), Year of construction: 2005, operating hours: 18,436 h, Functionality: fully functional, travel distance X-axis: 885 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (min.): -10 °, swivel angle B-axis (max.): 110 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 885 mm Y-axis: 600 mm Z-axis: 600 mm Rotary axes: B-axis -10° to +110°, C-axis 360° Feed, dynamics and tool holder Maximum feed rate: 90 m/min X-axis acceleration: up to 15 m/s² Y-axis acceleration: up to 12 m/s² Z-axis acceleration: up to 18 m/s² Tool holder: HSK-A63 Table and load NC rotary table diameter: 750 mm Maximum load: 600 kg Cooling lubricant system & chip conveyor Container capacity: 500 liters Coolant supply: 40 l/min at 2.3 bar Chip disposal: Efficient scraper belt conveyor (Discharge height 850 mm) MACHINE DETAILS Operating hours: 18,436 h Switch-on time: 46,702 h Rated power: 73 kVA Rated current: 105 A Operating voltage: 400 V Operating pressure: 6 bar Compressed air connection delivery rate: 30 Nm³/h Submitting a bid obliges you to collect the machine on time by February 19, 2025! Celqjvrxcps I Uc Ujgt

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 1110 000026 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Working surface: 1,000 x 800 mm System: DMG Heidenhain Mill Plus Rotating table (4th axis): available X-travel: 1,250 mm Y-travel: 880 mm Z-travel: 800 mm Spindle Cgelq I Ujvwb Huec Ujt Spindle mount: SK50 Max. spindle speed: 8,000 rpm Spindle motor power: 28 kW Pallet changer Number of pallets: 2 pieces Pallet size: 1,000 x 800 mm Tool magazine Number of tools: 120 pieces

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Celq I Ucsvtnm Hs Uogt Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: used, Year of construction: 2003, operating hours: 14,000 h, Functionality: fully functional, Universal machining center. Control TNC530 Heidenhain. Delivery time immediately. Cgslq I Ujurcyuec Ust Freight basis ex location. Swivel milling head. 4-axis Dividing head NIKKEN cpl. overhauled with 2 CNC axes controlled. Tool changer and many accessories.

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm Colq I Ujtumqvsc Usgt control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Cgelq I Ucjt Hw Trs Ust Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1148000080, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-travel: 1,000 mm Y-travel: 1,000 mm Z-travel: 1,000 mm C-axis: 360° Cgslevrfnfsq I Uc Uot Control: MillPlus IT Heidenhain Tool magazine Capacity: 60 slots Spindle Max. spindle speed: 12,000 rpm Spindle mount: SK50 DIN 69871 Table Clamping surface: 1,000 mm x 800 mm MACHINE DETAILS Total power requirement: 65 kVA Machine weight: approx. 24.5 t Space requirement: approx. 6.50 m x 5.20 m x 3.50 m EQUIPMENT - Pallet changer - Electric handwheel HR410 - 4th operating mode - BLUM Laser tool measurement - Vibration sensor - IKZ pressure level 40 and 80 bar - Rotoclear Air filter system Coolant system 980 l Chip conveyor

Year of construction: 1986, Condition: good (used), CNC milling machine MAHO MH 800 E year of construction 1986 half cabin Technical data: X-axis travel 800 mm travel Y-axis 450 mm travel Z-axis 500 mm spindle mounting ISO 40 spindle speed 63 - 3150 rpm rigid angular table 1200 x 620 mm feeds X, Y and Z 1 - 1500 mm/min rapid traverse X-axis 4000 mm/min rapid traverse Y-axis 2500 mm/min rapid traverse Z-axis 3000 mm/min drive power 5,5 kW weight approx. 4000 kg outer dimensions approx. 2600 x 2600 x 2200 mm with - Philips 432 screen control - rigid angle table - documents available Cgeloig E Thjq I Uc Uot function untested

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,836 h, Functionality: fully functional, travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Heidenhain iTNC 426 Travel X / Y / Z: 1080 / 710 / 710 mm Table size: 1500 x 795 mm Spindle holder: SK40 Tool magazine: 32 places MACHINE DETAILS Spindle hours: 20,836 h Switch-on time: 58,772 h EQUIPMENT - Chip conveyor - Measuring probe - 4 x vices Cgolq I Uju Rbl Iec Uet

Condition: good (used), Year of construction: 2011, operating hours: 12,926 h, Functionality: fully functional, machine/vehicle number: 12160000083, travel distance X-axis: 936 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 651 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Cgeljvxtgveq I Uc Uot X-travel: 936 mm Y-travel: 850 mm Z-travel: 651 mm Spindle speed: 10,000 rpm Magazine size: 30 MACHINE DETAILS Dimensions: 5.1 x 3.1 x 3.2 m Weight: 11.4 t Connection power: 63 kVA Operating voltage: 400 V, 50 Hz Program run: 36,373 h Spindle hours: 12,926 h EQUIPMENT - without magnetic table

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control SIEMENS 840 C Cslqot Hw R Rs I Uc Usgt total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m

Condition: repair required (used), Maho MH 900 C without housing Control: CNC 432 (V9) - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm - Maximum table load: 900 Kg - Spindle mounting: SK50 Celq Isfgg Aae Uc Uegt - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Condition: ready for operation (used), Year of construction: 2001, operating hours: 50,162 h, Functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control Heidenhain TNC 430 x-travel: 600 mm y-path: 700 mm z-path: 600 mm NC swivel rotary table: 630x500 with pallet carrier Pallet changing device: 2-fold Pallet size: 2 x 630 x 500 mm Tool changing device: 60 places MACHINE DETAILS Cgelq I Ucouhyycs Ust Switch-on time: 99,556 h Spindle hours: 55,162 h EQUIPMENT - Coolant system - Cooling: IKZ - Rotary pallet changer - Chip conveyor - Measuring probe - 2 vices - 2 interchangeable pallets

Condition: used, Year of construction: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm total power requirement 25 kW weight of the machine ca. 11,5 t M A H O (Germany) CNC Controlled Bed Type Universal Machining Centre Model MH 1200 S (120012) Year 1991 * Partially reconditioned in Year 2007 by MMD Company _____ Table travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mm Spindle head Z axis, cross 600 mm Celq I Ucjt Hwqwj Ujgt Rotary Table size 1,000 x 800 mm Distance between spindle and column, max. 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Max. weight of workpiece 1,000 kg Feeds / quick feeds, X, Y and Z Axes 1 – 4,000 / 12,000 mm/min Feeds / quick feeds, B Axis 1 – 1,500° / 10 rpm Spindle drive 15 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 11,500 kg Dimensions of machine 2.75 x 5.10 x height 2.90 / 3.40 m Accessories / Special Features: * MAHO Continuous Path Control, Model CNC 432, for 5 axes, with colour monitor, graphics, and all the usual subprograms and cycles. Mobile manual control unit with RS 232 Interface Entry for external data communication. * CNC rotary table (B Axis) in conjunction with the CNC Controlled swivelling milling head allows machining in 5 axes, Resolution 360.000 ° * Vertical, rotating milling head with hydraulic tool clamping. * Horizontal milling spindle with hydraulic tool clamping. * CNC controlled tool changer with 36 positions. Tool life supervision and tool breakage supervision. With RENISHAW Measuring Probe. * Separate coolant device (no internal coolant supply) * Complete covered working area with sliding doors. * Chip conveyor. Oil cooler for the hydraulic system. Condition : Very good. Can be inspected under Power here in our stock. This is a very stable machine suitable for heavy cuts. It was partially reconditioned in 2007 by MMD Company: geometrically measured, and mechanic and electrics were tested - a beautiful machine for the “ Conaisseur”. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.