Used Gesan Dps 100 for sale (40,242)

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz Bolirspcmt Tjaqfswl -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Bslirasl Nbqcjqfjwl Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Year of construction: 1994, Used premix BC – 10000 Lh Technical Overview: The used premix BC – 10000 Lh is configured as an industrial bottling unit created by BC in 1994, specifically the 10o model. This system is admirable given its production capacity of 10,000 L/h. It is underlined that the machine has been stored in conditions that allow its immediate operation. It can take place immediately following installation and proper assembly.  This used premix is actually located in the north of Italy. Operational and Maintenance Details of the Used premix BC – 10000 Lh: From an operational point of view, this used premix is presented disassembled. This indicates that the shipment of this machine will be fast. It is essential to note that technical manuals are available, an element that will significantly contribute to ordinary and extraordinary management and maintenance. These documents are indispensable resources to ensure the long-term operational efficiency of the system. Features of the CIP System: In terms of sanitization, the integrated CIP system is a crucial component of this used premix BC – 10000 Lh. This functionality is not an option but a necessity, given the importance of in-place cleaning in the bottling process to ensure compliance with sanitation standards. The effectiveness of this system directly influences the quality of the final product and the general efficiency of the production plant. Overall rating of the Used premix BC – 10000 Lh: Belirevgubdoaqfjwl In conclusion, the premix model 100 presents itself as a machine with robust specifications and a history of reliability. However, interested operators and organizations should proceed with a thorough assessment of their operational needs and compatibility with this specific bottling machine model. Considering its capabilities, the availability of manuals, and the CIP system, it is a unit that, despite its age, retains some value in the appropriate manufacturing context.

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, Giben Prismatic 2 SPT H.100, year 2005 after partial refurbishment - new motor and control! Bwjlorx R I Hoiraqfjl Cutting length 3800 mm Width of lifting table 2200 mm Number of grippers 5 Feedrate max 130 m/min Saw blade projection 100 mm Saw blade diameter max 400 mm Main motor power 11 kW Scoring saw YES Lift table YES Stop side Left Control GIBEN G-DRIVE RT Conformity marking CE mark Total connection 18 kW Floor: L 9572 x W 6645 x H 1800 Weight 7840 kg Status: dismantled

Condition: used, Year of construction: 1980, pressing force: 100 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,625 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 28,000 kg, power: 825 kW (1,121.69 HP), cylinder stroke: 2,300 mm, Machine has always been used as a backup for a larger machine. Machine is currently disconnected. Bwsljvmqm Nsiraqfel The machine is in working condition, but could definitely use some attention. The machine leaks a little oil at some valves. We can offer parts, service and installation separately. The machine is currently in Greece.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total width: 1,415 mm, total length: 1,415 mm, pressing force: 300 t, table width: 1,000 mm, table length: 1,000 mm, table height above floor: 1,300 mm, overall weight: 18,000 kg, retraction force: 100 t, operating pressure: 250 bar, STANDARD FEATURES - Steel construction body and parts with stress / welding tension relieved by vibration method - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHKSP 300/100 PRESSURE (TON) 300/100 STROKE (MM) 800 POT CYLINDER STROKE (MM) 250 TABLE - RAM DISTANCE (MM) 900 TABLE SIZE (MM) 1000X1000 RAM SIZE (MM) 1000X1000 PRESS DEPTH (MM) 1415 PRESS WIDTH (MM) 1415 TABLE DIMENSION FROM FLOOR (MM) 1300 PRESS HEIGHT (MM) 4000 MAIN CYLINDER DIAMETER (MM) 390 POT CYLINDER DIAMETER (MM) 230 ENGINE POWER (KW) 30 PRESS WEIGHT (KG) 18000 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 4 (FOUR) MONTHS DEPENDING ON ORDER Bwolirasvm U Uqjqfel PRODUCTION FROM 40 TONS TO 300 TONS IS AVAILABLE.

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge, heating element, heating register, finned tubular heater -Heating element: finned radiator -Type: unfortunately no type designation Bjliraoqpl R Aoqfswl -Voltage: V -Power: W -Total dimensions: 825/100/H130 mm -Weight: 8.4 kg

Condition: used, Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pcs. punching brackets, punching unit for press brake Year of manufacture approx. 1990 throat depth: 160 mm Beliedz Sp Hsraqfswl Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) A ø 5 mm round punching tool is installed Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brake Punching frame base plate dimensions L x W x H: 2500 x 345 x 37.5 mm Punching frame pressure plate dimensions L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition

Condition: used, Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing -Number: 2x clamping angle available -Price per piece Bweliraolcfixeqfol -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.

Condition: used, Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator Belei Exqmsiraqfowl -Ventilation damper: louvered louvre damper -Type: 9 adjustable slats -Material: aluminum -Total dimensions: 445/100/H330 mm -Weight: 2.6 kg

Condition: used, Stop for lathe support, longitudinal stop, lathe, support stop -Clamping tool: stop for lathe support Bwjlishnfd Seraqfol -Bore: Ø 45 mm -Dimensions: see photo techn. drawing -Total dimensions: 134/100/H186 mm -Total weight: 9 kg

Condition: used, Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching Bwjlsqux Ndjiraqfsl -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Bwjlod Stiwsiraqfsl -DSG type: 167/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 600 mm -Number: 1x cylinders available -Price: per piece -Dimensions: 115/115/885 mm -Weight: 12.45 kg

Condition: used, Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm Bjlslcfi Hjiraqfowl -Number: 2x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Condition: used, Tool holder, turning tool holder, tool holder, turning tool, turning tool holder -Mass perforated plate: see pictures -Dimensions: 175/165/H65 mm Bolsb A Spuoiraqfewl -Weight: 6.6 kg

Condition: used, Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake Belec Nq Udoiraqfewl -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Condition: used, Alignment ruler, alignment rail, steel ruler -Angle: 90° Bwjlijfiqrqoraqfel -Dimensions: 3000/100/H15 mm -Weight: 28 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 3.55 rpm -Power: 0.55 kW -Diameter shaft: Ø 50 mm -Construction: B5 Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg Beljcmkbceiraqfswl

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders Bwolisfbmbferaqfjl -Stroke: 100 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 265/65/H65 mm -Weight: 1.7 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 1600/100/600 Bwolirod Stixoaqfsl -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 587 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 115/115/880 mm -Weight: 13.6 kg

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm Belirsdkx S Ssaqfewl -Total length: 290 mm -Total length extended: 390 mm -Dimensions: 48/48/H290 mm -Weight: 0.9 kg

Condition: used, Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100 mm -Length: 800/1000 mm -Height: 825 mm -Thread: M24 -with stand: 200 mm wide -Number: 4x milling support available -Price: complete -Weight: 2566 kg Bjliscn Rd Eoraqfowl

Condition: used, Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motors available Bslirecmkbbsaqfswl -Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, Beliredkx Tcjaqfowl -Stroke: 100 mm -Piston: Ø 50 mm -Piston rod: Ø 18 mm -Total length: 340 mm -Total length extended: 440 mm -Dimensions: 66/66/H340 mm -Weight: 2.1 kg

Condition: used, Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg Bwsliraqjgprkujfjl