Used Weiss Wm460A X 2000 Mm for sale (135)

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Blodjziixrepfx Acfsp Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Blsdpoziiz Hofx Acfjp   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial emission test chamber / VOC test chamber / climate test chamber Water-cooled For sale is a professional emission test chamber: Weiss Technik EmissionEvent VOC/240 (year of manufacture 2018) from an industrial laboratory and testing facility. The device is used to perform emission tests in accordance with standards under precisely controlled temperature, climate and process conditions and is designed for continuous use in laboratories, industry and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emission) of materials under defined conditions. This involves examining which substances a material releases into the air. Typical applications: Emission testing of plastics, components, materials Automotive interior material tests (odor / pollutants) Building products & furniture emissions Packaging, textiles, adhesives, paints Quality control and standard tests (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity and air conditions. Emissions are passed from the test chamber via a carrier gas (e.g. nitrogen or air) and can then be measured with analysis devices. Device function / features: Stainless steel emission test chamber (hermetically sealed) Temperature and climate control Carrier gas system for emission measurements Automatic process control with touch panel Program operation / continuous operation possible Sampling connections for VOC analysis Industrial design (laboratory & continuous operation) Data for temperature tests: Temperature range +20 to +130 °C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.1 to ± 0.5 K Temperature change rate (according to IEC 60068-3-5) Heating 0.4 K/min Cooling 0.3 K/min Temperature change rate (on average, with increased heating and cooling capacity) Heating up to +65 °C 1.5 K/min Cooling from +65 °C to +20 °C 1.3 K/min Data for climate tests: Temperature range +20 to +130 °C Dew point range +5 to +60 °C Humidity range 5 to 95 % RH Temporal temperature deviation 0.1 to 0.3 K Temporal humidity deviation -3 to 3 % RH Dimensions EmissionEvent VOC/240 External dimensions (device) Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber) Emission test chamber: 200 l Test chamber gross: 240 l Test chamber net: 208 l Max. test specimen: 80 kg Internal dimension VOC/240 Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 12.1 kW Rated current: 30 A Protection class: IP54 Refrigerant Bjdpfx Aceziyz Rjfjlp R134a – 2.5 kg Weight: approx. 1080 kg For your security as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: used, Weiss Climate chamber / Temperature and humidity chamber Weiss WK3-340/70 Climate chamber Temperature range from -70 °C to +180 °C with humidity control Approx. 335 liters / 10 to 98 % RH / air-cooled For sale is a used climate chamber from the manufacturer Weiss Umwelttechnik GmbH. The climate chamber is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large observation window and lateral test specimen ports. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Device type: Climate chamber / Temperature and humidity chamber Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate cooling: approx. 3 K/min Temperature change rate heating: approx. 3 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.55 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions and weight: Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Air-cooled design Stainless steel interior Large observation window Test chamber lighting Lateral test specimen ports Adjustable feet Program and manual operation Test specimen port right: DN 125 mm Test specimen port left: DN 50 mm Stainless steel inserts as shown in the pictures Areas of application: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Weiss WK3-340/70 Climate chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to change, errors and prior sale. Blodpoz A A T Hsfx Acfop We will be happy to answer any further questions by telephone.

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. The climate testing chamber was developed for carrying out Bsdpe Abbidjfx Acfolp temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Bledsytr Swspfx Acfsp Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), We offer a climatic test chamber from Weiss with Feucht! The climatic test chamber was only serviced by Weiss / Vötsch in December 2020 and was still in use until December. 2021 the test sticker! All tests were carried out, another test run was carried out in our house, the humidity and temperature were checked with calibrated test equipment. The climatic test chamber has been serviced once a year and is in perfect condition! The logbook is attached WHITE 1500SB / 010JU / 40DU Temperature range -40 ° C - + 180 ° C Humidity / climate: 15%-95% / 10°C - 95°C Test space: 1500 liters Inner dimensions: 1490 mm deep, 1100 mm wide, 945 mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2.00kg The cabinet has no feet and is stable on a frame If you have further questions, you can contact us at any time Bjdjg Dcfzepfx Acfolp

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 Blsdpfexmurxjx Acfjp - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Bodpfsza Dv Ijx Acfolp Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss   Weiss Umwelttechnik WT-600/70/5 Temperature testing chamber -70°C to +180°C Water-cooled   For sale is a used temperature testing chamber from Weiss Umwelttechnik. The unit is functional and has been inspected.   This is a temperature testing device without a humidity function. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is often used in industry, development, and quality assurance.   The temperature range is from -70°C to +180°C. The unit can heat up and cool down quickly and operates with forced air circulation for uniform temperature distribution inside. Cable feedthroughs with 125 mm and 50 mm are available.   Technical data: Test chamber designation: WT-600/70/5   Cold/heat operation -70°C to 180°C   Temperature change per unit of time Cooling: approx. 6 K/min Heating: approx. 6 K/min   External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   3/N/PE AC 400V ±10% 50Hz Rated power: 16 kW Rated current: 19 A Fuse (customer-supplied): 29 A slow-blow Permissible test item weight Bedpfx Ajy At Sxecfslp Total load capacity of the shelf supports: 80 kg   Test chamber floor: 80 kg, Insert shelf: 40 kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your peace of mind as a buyer, the following information!   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After a successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments.   Condition: used   Scope of delivery: (See image)   (Changes and errors in technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2021, WEISS Ltd. used / tested CR heavy duty table with servo amplifier B&R 8V1180.00-2 EXTREME LOADABLE, FOR HORIZONTAL AND VERTICAL 585Kg axial runout : 0,02 mm Radial runout : 0,02 mm Center opening : Bodpopa Nz Dofx Acfelp 346 mm max. dynamic axial force : 70000 N B&R: 8V1180.00-2 Modular mechanical design by plug-in modules Integrated mains filter Integrated or optional external braking resistor All connections in pluggable design Integrated electronic restart interlock ACOPOS servo drive, 3x 400-480 V, 19 A, 9 kW, line filter, braking resistor, DC link power supply and electronic safe restart interlock integrated

Condition: used, Vötschtechnik Climate testing chamber / Temperature testing chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from Vötschtechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (over time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (over time): ±1 to ±3 % RH Temperature deviation (over time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Lateral cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Applications Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Visual condition as shown in the pictures Scope of delivery 1x Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Bljdpfszrwyiox Acfjp The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Bjdpfozznx Iox Acfelp Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Bedpfx Ajzzag Djcfelp Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate chamber, water-cooled For sale is a used climate chamber from Vötschtechnik GmbH. The chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, and development and stress testing. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate chamber / Temperature chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (over time): ±0.1 to ±0.5 K Temperature homogeneity (spatially): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (over time): ±1 to ±3 % RH Temperature deviation (over time, climate mode): ±0.1 to ±0.3 K Temperature homogeneity (spatially, climate mode): ±0.5 to ±1 K Bledpfx Aceznvxiefep Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 8.6 kW Rated current: 21 A Sound pressure level: approx. 57 dB(A) Features Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Side cable entry Multiple insertion levels Ethernet interface USB interface Accessories according to images Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate chamber Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Weiss TS 130 Thermal Shock Chamber Manufacturer: Weiss Umwelttechnik GmbH Model: TS 130 Machine type: Thermal Shock Chamber Test chamber volume: approx. 130 liters For sale is a used Weiss TS 130 thermal shock chamber with a hot and cold chamber, a movable lift basket, SIMCON/32 touch control, and a separate air-cooled condenser/cooling unit. The system is suitable for temperature cycling and thermal shock testing, environmental simulation, material and component testing, electronics testing, quality assurance, as well as research and development. Technical data: Hot chamber: +60 °C to +220 °C Cold chamber: -10 °C to -80 °C Switching time hot/cold chamber: approx. 10 seconds Temperature stability: ±1 K Internal dimensions (W × D × H): approx. 500 × 600 × 450 mm Max. load lift basket: 20 kg Max. load per insert rack: 10 kg Refrigeration system: Air-cooled refrigeration cascade Separate condenser/cooling unit as shown in the pictures High-stage refrigerant: R404A / 2.2 kg Low-stage refrigerant: R23 / 1.2 kg Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standby pressure: 11 bar g Electrical data: Blodpfx Aezp D D Necfop 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14.0 kW Rated current: 26.0 A Connection type: CEE 32 A Control / Equipment: SIMCON/32 touch control Hot and cold chamber Movable 130-liter lift basket Test chamber door with viewing window Separate air-cooled cooling unit Operating hour counter SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Dimensions / Transport data: External dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width incl. door hinge: approx. 1,850 mm Depth incl. removable door: approx. 1,155 mm Weight of test chamber: approx. 950 kg Separate cooling unit on pallet as shown in the pictures Freight / special transport possible Condition: Used - Year of manufacture 2008 Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Weiss TS 130 thermal shock chamber Separate condenser/cooling unit SIMCON/32 touch panel SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Weiss sharpening machine for sharpening small and medium-sized circular saw blades. The machine is mounted on a workbench. Bedpfxjzrx H Ds Acfelp Technical data: - Saw blade diameter: max. approx. 600 mm

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external-interna- face and cylindrical grinding. The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Workpiece weight: 250 kg Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Bodor Ey Hujpfx Acfolp Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Bsdezzk Tbopfx Acfolp Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: Blodpjyi Ezksfx Acfjp - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Electric motor, three-phase motor, brake motor -Manufacturer: Weiss, electric motor with brake -Type: 5.5AZK 90L-8T B14P140 Bedsm Dyicspfx Acfslp -Power: 0.55kW -Speed: 675 rpm -Brake: 20 Nm -Shaft: Ø 24 x 50 mm -Construction: B3 -Protection class: IP 55 -Number: 2x motor available -Price per piece -Dimensions: 385/175/H230 mm -Weight: 19.4 kg/pc.

Condition: refurbished (used), Year of construction: 2008, rotational speed (max.): 18,000 rpm, WEISS / SPL Motor Spindle HSK-A63 175389A 18000 rpm Manufacturer: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Bodpfx Aoyrz Ryocfslp Type: Motor spindle Spindle type: 175389A Tool interface: HSK-A63 SPL type: DR-WE-175-M-W-18-46 Serial number: 60201670 Year of manufacture: 2008 Maximum speed: 18000 rpm Motor: AC135/200/4 Protection rating: IP54 Cooling: Water cooling Coolant flow rate: 8 l/min Temperature sensor: KTY 84-130, PTC Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Total length L: 1026 mm Spare part number: 90010000013

Condition: new, WEISS 174282-014 spindle, dimensions see acceptance protocol, unused in opened original packaging, 100% functional, scope of delivery as per photos Bljdez Adk Nepfx Acfep

Year of construction: 1997, condition: excellent (used), Safety workbench Manufacturer: WIBO Weiss Type: Jekt TCRJO 180/98 with stepped design made of stainless steel Work area: Depth: 920 mm Height: 1200 mm Width: 1800 mm Working height: 600 mm Overall dimensions: Depth: 1080 mm Height: 2100 mm Blodpfohk St Aex Acfsp Height with dust extraction: 2550 mm Width: 1800 mm

Condition: used, Year of construction: 2002, Power 18.5 kW Rotor 600 mm Opening 100cm/100cm Bodpfe Afhk Aox Acfolp Hours : 2677 380 V