Used Doosan Solar 035 for sale (301)

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Emission level: Stage V / Tier V Hpsdpfx Afsxxmyrspea Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Hjdpfjx Dk Dlsx Afpspa Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: new, power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 8 h, Equipment: air conditioning, Technical information Hpodsxuz Ivjpfx Afpsa Track width: 60 cm Empty weight: 50.800 kg Make of engine: DC13 076A Functional Bucket capacity: 2,72 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Hedpfx Afsx Hy R Nspopa Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Hjdpjx E Egajfx Afpjpa Table load 400 kg Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Hpodpfxsxqfb Es Afpja Digging depth: 4.88 m

Condition: used, Year of construction: 2010, load capacity: 3,500 kg, lifting height: 6,000 mm, fuel type: diesel, construction height: 2,637 mm, Equipment: cabin, head guard, Diesel forklift truck, mast type: Triplex, roof cover, half-cab, windshield wipers, exterior mirrors, lifting height approx. 6000 mm, overall height: 2637 mm, free lift: 2184 mm, sideshift, fork length: 1200 mm, load capacity approx. 3500 kg, work lights, front, rear, rotating beacon, vehicle can be fitted with advertising and/or lettering Hedpfx Afsvnqfhepopa Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Hpodpfswqf Uujx Afpja Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Hedpfxsx Eivps Afpspa Height: 2800mm Weight: 22000kg

Condition: used, Year of construction: 2015, operating hours: 7,473 h, Serial number: dhkceaaucf6001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21920 Specifications: 2015 model 7473 hours 36.2 kW Weight: 6250 kg Machine width: 197 cm Movable boom Chassis (see pictures) Hpedpfx Afox Aavzopsa Cut Rubber belts Yanmar engine Central lubrication Tiltrotator Sanding bucket Excavator bucket Auxiliary hydraulics Air conditioning/ac Light Radio Ready for delivery Description: We have a 2015 Doosan DX62R-3 excavator with rototilt, sanding bucket and backhoe bucket for sale. The machine works as it should according to the owner and it comes with 2 drawers and a rototilt. The machine is in weekly operation so the number of hours will increase slightly. Ready for delivery Hours: 7473 Own weight: 6250 Kw: 36.2 Model: DX62R-3 gravemaskin m/ rototilt, pusseskuffe og graveskuffe

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm Hjdpfex E Eamjx Afpjpa A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2017, operating hours: 7,830 h, Year of manufacture: 2017 Hpodpfx Afsx Hgtwopea

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 FANUC touch control Specification: Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) Hpjdpfxsx Id D Ae Afpoa C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, Hpodpswnfzcofx Afpea 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Hpedox D Hmvspfx Afpea Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes and Milling function with the C axis. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Application Types Turning

Condition: used, Year of construction: 2011, operating hours: 10,500 h, Year of manufacture: 2011 Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 347 cm Hpodpfx Asx Hgr Hofpja Digging depth: 7.533 m

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity , machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, Hpodpfx Afowq Inqjpea swarf conveyor, parts catcher, tool setter, tailstock

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3480 mm Measurements depth 3850 mm Measurements height 3170 mm Machine weight 13500 kg Control Unit Brand SIEMENS Model 828D Hsdox D R I Rjpfx Afpopa Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1630mm Y-Axis Movement 762mm Z-Axis Movement 650mm Tools Type of tool holder BT40 This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,240 h, Year of manufacture: 2014 Empty weight: 23.500 kg Carrying capacity: 1.800 kg GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m Hpsdpfxsx Hgrao Afpoa

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant Hedpsq T Rt Defx Afpspa

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 1600 mm Hpedex D Il Hopfx Afpea Measurements depth 2700 mm Machine weight 3500 kg Control Unit Brand FANUC Model i-Series Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 4 Movement X-Axis Movement 160 mm Z-Axis Movement 550 mm B-Axis Movement 550 mm Workpiece Workpiece Z 510 mm Workpiece weight 130 kg Turret Number of turrets 1 Tool taper BMT45 Tools Number of station 12 Max tool diameter 32 mm Additional Equipment IEMCA KID 80 automatic bar feeder Set of fixed and driven toolholders Soft jaws Hard jaws This 4-axis DOOSAN Lynx 220 LMSA was manufactured in 2013. It features a FANUC i Series control unit, dual spindles with a speed of 6,000 rpm, and a comprehensive travel range with X-axis at 160 mm and Z-axis at 550 mm. It includes an IEMCA KID 80 automatic bar feeder and a set of toolholders. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMSA machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, fuel type: diesel, fuel tank capacity: 78 l, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 7,300 h, Year of manufacture: 2015 Hedpfx Aex Hgqvjfpjpa Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Hedpfx Aex D Dtasfpjpa Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,620 h, Year of manufacture: 2015 Empty weight: 14.400 kg Hedpfx Afex Hgqijpspa Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,540 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Hpodpsx Hgn Usfx Afpsa Engine type: Yanmar Yanmar 4TNV94L