Used Gesan Dps 80 for sale (17,017)

Condition: used, KHS triblock filling line 45-80-10 Hsdpfoychaiex Accsnk - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Year of manufacture: 1998 Complete machine documentation – several folders.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 04/2027, working width: 800 mm, conveyor belt width: 800 mm, type of input current: three-phase, Compact pretzel long rolling machine with croissant rolling attachment Universum Kasper model: LWT 3/80 Premium EB II W 20 Suitable for all stick products like Kornspitz and pretzel sticks, etc. Universal combination rolling machine For all doughs for rolling and elongating Maximum long-roll width: 800 mm Robust engineering Dough insertion from 40 to 300 grams Stainless steel construction With EB2 feeding unit Hnedpfewpzl Hex Accjk Suitable for bread roll production lines DGUV V3 safety tested – exclusively by us Connection: 400V, 16A-CEE plug Used machine, refurbished and SAB-tested With warranty and spare parts service Visit our large bakery machine showroom!

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 750 mm, total length: 750 mm, total height: 1,430 mm, input frequency: 50 Hz, Hommel Goldflocke GF 80 Super Hsdpeytzvfefx Accjnk Wholegrain fresh flaker for all types of cereals Throughput approx. 400kg/h Stainless steel construction Machine is mobile DGUV V3 safety tested (only by us) Connection: 400V, 16A CEE plug Dimensions: 750 x 750 x 1430 mm (W x D x H) Used machine We have many more bakery machines in stock!

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 58200 € 1099.98 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. Hedewiq I Dopfx Acconk hydr. overload safety device o.r. etc.

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Hnedpjgvvn Ejfx Accek • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Hnedpfx Acjdcd Dlecjk Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Diosna spiral Hnjdecphnpjpfx Accjk Model: SP 80D stainless steel More Knetspiralen upon request!

Condition: used, Year of construction: 2008, operating hours: 677 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 298 mm, load center: 600 mm, fuel type: diesel, motor manufacturer: ISUZU, fork length: 1,800 mm, empty load weight: 11,604 kg, total height: 3,550 mm, Equipment: pallet forks, sideshift, Forklift Truck, Used Make: HC Hangcha / EP Equipment Model: CPCD 80 HW 14 Year of manufacture: 2008 (Purchased new) Operating hours: 677 Hedpfx Ajyxyz Eecconk Maximum lifting capacity: 8,000 kg at 600mm load center Maximum lift height: 4.50 m Free lift: 298 mm Fork length: 1,800 mm Fork width: 160 mm Engine: ISUZU Diesel, 6 cylinders, 6.5l, 84kW Features: - Fork positioner + side shifter - Baumot diesel particulate filter system - Grammer seat - Lighting system - Built-in trickle charger Dimensions: Length: 3.90 m + forks 1.80 m Overall height: 3.55 m Unladen weight: 11,604 kg Condition: The forklift is in very well-maintained, little-used condition and has always been stored indoors. It was purchased new in 2006 and was only used occasionally for loading the company’s own products. - Batteries (2 x 110 Ah) new - Hydraulic hoses new in 2023 - UVV (accident prevention inspection) expired, inspection log available The forklift can be inspected and test-driven by appointment.

Condition: used, Year of construction: 2023, operating hours: 180 h, 2023 | Bomag BW 80 AD-5 | Used Tandem Roller | 180 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 41 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Hnsdpoydr Awofx Accok Semi-new look machine with low hours. No problems 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37599 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: H32023/1001, Production line for manufacturing empty capsules Consisting of: • Mixing tank for preparing HPMC solution • Dipping process system for capsule forming with drying tunnel • Cutting machine for capsule cap • Cutting machine for capsule body • Assembly machine • Sorting system with camera inspection and freely programmable individual reject • Compressed air system with refrigeration dryer and filtration system • Purified water system (under 10ppm) • Clean air system • Enclosed room with several compartments and airlock, 210 m² Hnedeyyq Tbopfx Accsk Turnkey solution including know-how transfer, installation, training, long-term consultancy, and technical service The system is commissioned and calibrated on-site. The plant is currently fully assembled and in production. Requirements: floor that is easy to clean, sufficient electrical power supply, adequate water supply, sufficient floor load capacity.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Hnedpfx Ajudn Utsccsk Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Year of construction: 1966, condition: ready for operation (used), An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible. Hodpfx Aoyx H H Ioccsnk

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Hsdpfx Acsyxxmgscsnk

Condition: like new (used), Year of construction: 2007, operating hours: 33,988 h, Clamping force 50 kN Screw diameter D18 mm Hnsdsyvt Rbepfx Accsk Max. injection volume 25.4 cm³ Mounting plates 500 x 455 mm Total weight 3800 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Hnedpeyvhl Hefx Accok

Condition: used, Max. Presskraft: 800 kN (80t) Max. bending length: 2500 mm Currently 5 punch brackets are installed, which can be moved (Installed tool with 4 x 12 mm hole diameter and 1 x 10 mm) No other bending prisms available Hjdeyrnw Tepfx Accsnk

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW Hnsdoxabhaopfx Accsk motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: used, Electrically heated tempering furnace with protective atmosphere Type: TSK-8-10-12-80 Temperature: max. 850°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Hnedsxcphmepfx Accsk Heating power: 80 kW Atmosphere fan: 4,0 kW

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, table width: 500 mm, table length: 630 mm, For sale is a horizontal machining center DMC 80 H hi-Dyn with 4 axes. The machine has only been used for milling and drilling cast parts for surface finishing. The spindle is in very good condition. Technical specifications: Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm B-axis: 360° Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Hjdpeytf N Asfx Accsnk Rotary table: 4th axis, 360° continuous Spindle: Direct drive, liquid cooled Replaced in 2023/2024 Measuring system: Glass scales Main drive: Max. speed: up to 10,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle Transport dimensions: LxWxH in meters: 5.2 x 2.4 x 2.7 Machine transport weight: 12,500 kg Dismantling, loading, and transport throughout Europe can be organized upon request for an additional charge. All prices are plus VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES ETC. Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 9 cup wheels vertical bevelling machine + 2 peripheral wheels for the edge + 1 cup wheel for the arris min. size : 40 x 40 mm speed : 0,5 - 4,1 m/min. glass thikness : 3 - 25 mm bevel angle : 3° - 45° max. bevel width : 60 mm power : 26 kw Hsdpfx Acoyw Hkwjcsnk machine sizes : L x W x H (m) = 8,4 x 1,7 x 2,3 weight : 5300 kg

Condition: ready for operation (used), Year of construction: 2017, clamping force: 800 kN, Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details. • Tie bar distance (H × V): 420 × 420 mm • Platen size (H × V): 595 × 595 mm • Mould height (min–max): 180–515 mm • Max opening stroke: 515 mm • Max daylight: 515 mm + mould height (depending on configuration) • Injection unit options: • Screw diameters: 18 / 25 / 30 / 35 mm Hnjdpfxoyn E E Tj Accjk • Shot volume: 22–116 cm³ (depending on screw) • Max injection pressure: up to 3000 bar (depending on screw diameter) • Max injection speed: 300 mm/s • Machine category: Fully electric (no hydraulics for main movements)

Condition: ready for operation (used), Year of construction: 2009, total height: 2,470 mm, overall weight: 5,200 kg, This IMAC FL 80-2500 press brake was manufactured in 2009. It features a maximum force of 800 kN and a table width of 2500 mm. The distance between uprights is 1990 mm, and it has a throat depth of 280 mm. With a motor power of 7.5 kW and a weight of 5200 kg, consider the opportunity to buy this IMAC FL 80-2500 press brake. Contact us for more information. Additional information • Table width: 2500 mm • Distance between uprights: 1990 mm • Throat depth: 280 mm • Maximum ram stroke: 180 mm • Maximum distance table/ram: 360 mm • Speed: > 10 min⁻¹ • Motor power: 7.5 kW • Maximum force: 800 kN (80 Ton) • Oil capacity: 200 Dimensions Machine Depth 2800 mm Hsdsx D Nfzspfx Acconk

Year of construction: 2009, condition: ready for operation (used), This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information. Hnedpfsx D Iwiox Accsk

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. • B-axis automatic swivel milling head • C-axis NC rotary table: 900 x 630 mm Hnedpfsx H U D Rsx Accok • Tool magazine: 60 positions • Heidenhain control system Additional equipment • Dual pallet changer • Coolant temperature control system • Chip conveyor • Internal coolant supply 40 bar • Paper belt filter • Rotating viewing window • Cleaning gun • Oil and emulsion mist separator Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets Hnjdpsx D Rvnofx Accjk