Used Kramer Allrad 850 for sale (75)

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. Giedpfjxbtrtex Ambju The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk Gedsfnabyjpfx Amboiu - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Gedpfx Aeyttv Rsmboiu

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine Gisdpfx Amovaatfobeu - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bending Machine Gedpfxevaar Ie Ambeiu - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Giedpfx Amjxl Elgjbsu

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2018, operating hours: 4,800 h,

Condition: like new (used), Meat grinder K+G Wetter Giedpfxox Aydlo Ambju Operating voltage: 400V / 50Hz Control voltage: 24V Power: 38kW

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Giodpfx Amjt Uqbljbju Weight: 850kg

Condition: used, Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Gisdpfxex Dcfne Ambou Operating voltage: 400V / 50Hz Power: 74kW

Condition: like new (used), Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Gijdpfoxrvtzex Ambou Power: 25kW

Condition: used, overall dimensions 2900x2500x1550/2100 mm; bowl 200 ltr; power supply 400 V,50 Hz; Gedpev Hppvefx Ambjiu 2 knife speeds 1500/3000 rpm, 48/66 kW; 2 bowl speeds, 2.2/2.7 kW; 2 mixing speeds, 2.2/2.7 kW; hydraulics 3.1 kW; loader; unloader 0.37 kW.

Condition: like new (used), The Kramer + Grebe SM 200 cutter (also known as a bowl cutter) is an industrial machine mainly used in the meat industry for cutting, mixing, and emulsifying meat and other ingredients. Giodpfx Aox S Ih Tsmbeu Main function: - It features a bowl with an approximate capacity of 200 litres. - The blades rotate at high speeds to cut meat, fat, ice, spices, etc. - Cutting while the bowl rotates produces a fine emulsion, resulting in a homogeneous texture in products such as sausages, pâtés, frankfurters, and more.

Condition: excellent (used), Height 360 cm Length 240 cm Gjdpfx Asrt Tt Djmbjiu Width 220 cm 2.5 kW motor 4,800 m³h

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Gijdpou H Af Ujfx Ambeu Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Gsdjd S U E Rspfx Ambsiu Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Condition: used, Grinder Gsdpfx Aoxmg R Tombeiu Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

Condition: used, Grinder with mixer Manufacturer: Kramer Grebe Wetter Gsdpfx Amsw Idzgjbeiu Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: used, Grinder Manufacturer: Kramer Grebe Model: WW200 For processing chilled meat and frozen meat blocks Made of stainless steel Hopper volume: 400 liters Diameter: 200 mm Voltage: 400V, 50Hz Two speed motor Electric power: 31/40 kW Productivity up to 12000 kg/h Gisdpfxotq T Rdo Ambsu Weight: 1300 kg

Condition: good (used), We offer steel tanks for the storage of almost all common liquid media. We have all available sizes from 1000 liters - 100,000 liters permanently in stock. Gedpjgx E Uhefx Amboiu No matter how your tank is to be equipped, we will implement your wishes and the official regulations at fair prices. Whether you need an inner shell, 2K epoxy coating, exterior paint, fitting extensions or conversions, DEKRA approval, loading and transportation - we are the right partner for you.

Condition: good (used), Year of construction: 1991, Krämer + Grebe WW 200 Meat Grinder Manufacturer: Krämer + Grebe GmbH & Co. KG Gijdpfex I Ny Asx Ambeu Model: WW 200 Machine number: 281/141 Year of manufacture: 1991 Plate diameter: 200 mm Power supply: 380 V, 50 Hz Current: 91 A Dimensions: 1900 × 1800 × 2250 mm Condition: incomplete – knives and plates are missing The Krämer + Grebe WW 200 industrial meat grinder is a robust machine designed for grinding raw meat and product blocks in medium and large food processing plants, particularly in meat or cheese production. The machine is constructed from stainless steel, ensuring a high level of hygiene and easy cleaning. The 200 mm throat diameter enables efficient product loading and preparation for further processing stages.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Krämer + Grebe SC-WW Meat Grinder Manufacturer: Krämer + Grebe Type / Model: SC-WW Machine number: 282/118 Year of manufacture: 1991 Power supply: 380 V, 3 phases, 50 Hz Current draw: 117 / 160 A Cutting plate diameter: 200 mm Overall dimensions: 1750 × 1350 × 2550 mm Gisdpjx E Dqqsfx Ambou The Krämer + Grebe SC-WW industrial meat grinder is a robust and durable machine designed for heavy-duty use in meat processing plants. Equipped with a high-performance working chamber and a 200 mm cutting plate, it ensures efficient and uniform mincing of even highly chilled meat. The machine is ideal for large-scale production, delivering stable operation, high repeatability, and safety in technological processes.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, total length: 1,250 mm, total width: 900 mm, total height: 1,150 mm, input voltage: 380 V, power: 10 kW (13.60 HP), Kramer Grebe WW130 1985 year 2 speeds - 10kW and 15kW 380V 50Hz 125 cm x 90 cm x 115 cm Entirely stainless steel, stainless steel screws, includes a set of knives and nets. Gisdpjx Dy Nqjfx Ambeu Machine refurbished in 2025

Condition: good (used), The KRÄMER+GREBE TMG 1500/200 mixing grinder is a professional stainless steel machine designed for industrial meat processing. It is ideal for grinding and mixing both fresh and partially frozen meat. Mixing Grinder CFS – KRÄMER+GREBE TMG 1500/200 Manufacturer: CFS – KRÄMER+GREBE Model: TMG 1500/200 Year of Manufacture: 1998 Machine Number: 371/0109 CE Certification: Yes Machine Features: Mixing tank capacity: approx. 1500 liters Processing capacity: Fresh meat: approx. 800-900 kg Partially frozen meat: approx. 700-750 kg Meat grinder throat diameter: 200 mm Main motor power for grinder: 45 kW (1 speed) Screw speed: 160/320 min⁻¹ Main motor power for mixer: 7.5/11 kW (2 speeds) Mixing paddle speed: 16/32 min⁻¹ Additional Equipment: Pneumatic sorting device Pneumatic discharge flap for mixer Stainless steel base Integrated loading for 200-liter wagons Application: Giedpfx Amoumlibebeu This mixing grinder is ideal for meat processing plants that require efficient and reliable machinery for grinding and mixing large quantities of meat. Machine Benefits: High performance when processing both fresh and partially frozen meat. Durable stainless steel construction ensures longevity and easy maintenance. Adjustable mixing and grinding speeds allow customization of settings to meet various production needs. Integrated pneumatic systems provide smooth and efficient operation.

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Gsdpfjpgnftox Ambeiu Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz