Used Gesan Dps 45 for sale (9,528)

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die cutting punch: Punch and die Ø 45 mm -Transport dimensions: Ø 90 x 80 mm Ibedpfx Aozr Ek Aeh Esa -Weight: 2.2 kg

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm Iodorbqtnopfx Ah Esba INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 21,109 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Iodpfxszr Sryj Ah Esba Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Rear tire size: 21x8-9 Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2026 Battery condition: 80 - 100% Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you don't purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will be happy to provide you with competent and comprehensive advice on our vehicles. Side shifter, 3rd valve, front work light, heater, full cabin, interior mirror, joystick, windshield wiper, single pedal control, LED, seat.

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Manufacturer: Nord, geared motor -Gearbox: Type SK12-71 L/4 i= 31.19 -Speed: 45 rpm -Engine: Nord type SK 71 L/4 -Power: 0.37 kW -Protection class: IP54 -Shaft: Ø 25 x 50 mm Ibodpfx Ahoy Tka Is Eja -Dimensions: 455/190/H170 mm -Weight: 16.4 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 x Cimec America Rinser, 8-Head Filler and Capper. This is a compact, automatic monoblock bottling system equipped with 9 x rinsing nozzles, 8 x isobaric (counter-pressure) filling valves, and 1 x capping head. It is highly engineered for rinsing, filling, and crowning still and carbonated beverages. Isdey Um Anopfx Ah Esba Manufacturer – Cimec S.r.l. Type - AM/DPS 9/8/IC/IVA. Date of manufacture - 2004. Equipment Included: • Rinser, filler and ROPP capper integrated. Crown capper is currently disabled. • All conveyors and drive motors – both ends. • Various change parts including 200ml and 330ml (currently installed). Output speed - Capable of up to 1,800 bph, depending on the bottle volume and product type. Overall dimensions - 3.5 m long x 1.4 m wide x 2.6 m high (approx.). Last in production in August 2025.

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch Isdpfxjk D Nt Dj Ah Ejba -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 10/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 5 mm Front right - 5 mm Iodpfx Ajzud Eqsh Eeba Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter Ibsdpfod Swrdox Ah Esa -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 -Inlet/Outlet: Ø 65/61 mm -Quantity: 46 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Iodpsztd Shsfx Ah Eoba

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Ibodpfoztd N Hex Ah Eea

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Ibjdpfx Aeyr Tn Djh Eja Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Ibjdpfjyr Twfjx Ah Eoa Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 12916, Rotor diameter: 350 mm Rotor width: 450 mm Rotor blades: 3 Isdpfx Aeyr Trpeh Eeba Stator blades: 2 Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Rotor width: 650 mm 3-knife rotor Iedeyr Tphspfx Ah Eoba 2 rows of stator knives Infeed cross-section approx. 450 x 650 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Ibodpfxoyr Ty To Ah Eoa Rotor width: 450 mm Rotor knives: 3 Stator knives: 2 Infeed opening approx. 440×400 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 13064, Rotor diameter: 450 mm Rotor width: 600 mm Number of rotor knife rows: 5 Number of stator knife rows: 2 Feed opening approx. 600×600 mm Drive motor: 55 kW Isdpfx Ahsyr Tt Tj Esba

Condition: used, Year of construction: 2025, total length: 9,470 mm, Leistung Tragfähigkeit – unbegrenzt 300 kg Tragfähigkeit – begrenzt 454 kg Max. Personen auf der Plattform (begr./unbegr. Reichw.) 3 / 2 Plattformschwenkbereich 160° Länge Korbarm 1,52 m Vertikaler Korbarm-Schwenkbereich 133° Oberwagen-Schwenkbereich 360° Seitlicher Überhang 0,97 m Fahrgeschwindigkeit – eingefahren (Reifen) 6,40 km/h Fahrgeschwindigkeit – eingefahren (TraX) 3,28 km/h Fahrgeschwindigkeit – angehoben (Reifen) 1,1 km/h Fahrgeschwindigkeit – angehoben (TraX) 1,1 km/h Steigfähigkeit – eingefahren(2) 45 % Neigungssensor-Aktivierung (Längsachse/Querachse) 7° / 5° Wenderadius – innen/außen (Reifen) 2,08 m /5,23 m Wenderadius – innen/außen (TraX) 2,08 m /5,23 m Reifen 315 / 55D20 Kettensystem – 4-Punkt TraX Antrieb/Energie Ibsdsy Abhuopfx Ah Eoa Antriebsart Diesel Hydrauliktankinhalt 144 L Kraftstofftankinhalt 132 L Gewichte(3) und Bodenlast(4) Eigengewicht (Reifen) 7.167 kg Eigengewicht (TraX) 8.623 kg Reifenkontaktdruck 634 kPa Kettenkontaktdruck 172,4 kPa Bodenlast (Reifen) 8,95 kPa Bodenlast (TraX) 10,7 kPa Schall- & Vibrationspegel Geräusch-/Schalldruckpegel (Boden) 90 dBA Geräusch-/Schalldruckpegel (Plattform) 77 dBA Vibrationen < 2,5 m/s²

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the highbed approximately 4,140 mm, length of the lowbed approximately 8,600 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 1,600 mm high, 18 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing points, 4 pairs of container locking mechanisms for 2 x 20 ft. ISO containers or 1 x 40 ft. ISO container, surcharge for aluminum ramps, price: 2,200 €, spare wheel, price: 300 €, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Ibjdpfx Aezr R U Tsh Eoa

Condition: ready for operation (used), functionality: fully functional, Tower crane 32/K/45 Crane with max jib of 30 m Ijdpfx Ahjzr D Uge Eoba Lifting capacity from 1,000 to 4,700 kg Counterweight (concrete) 16,000 kg The slewing motor, hydraulic pump, cylinder seals, hoses, ropes, and contactors have been replaced on the crane. Spare parts list and operating manual available. With remote control.

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Ibjdpszump Eofx Ah Esa Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: used, axle configuration: 2 axles, first registration: 08/2021, Year of construction: 2021, LOCATION: SWITZERLAND!! Operating hours, diesel: 637, mains: 307, Carrier HE Monotemp refrigeration unit. Double-deck system for 11-3 Euro pallets with 22 aluminum double-deck beams, load securing rails with perforated slotted strips on the side walls, flower width, superstructure certified according to DIN EN 12642 Code XL (TÜV load securing certificate), starting aid, liftable front axle, SCB air suspension, 2 chocks in holder, ABS, pallet box for 36 Euro / 24 ISO pallets, dual-circuit compressed air braking system with standard and Duomatic couplings, LED side marker lights linked with turn signals, storage box, tool box, spare wheel holder for two wheels, underrun protection bolted on, Trailer Connect battery, SKO, TK temperature recorder, 3 axles SCB 9t with disc brakes, ATP certificate, optional: ISO partition V6, longitudinally adjustable with ring fan, foldable. Iodpfezu Ebyex Ah Eeba

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 450 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1640,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Ijdpfx Ahszuxhms Eoba Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 350 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 350 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR35 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 350 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Iedpfxszuxg Ae Ah Esba Price : 1460,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Stand in galvanized - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 250 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1280,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Isdpfx Ahjzuwlkj Eoba Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 03/2023, total length: 13,310 mm, total width: 2,490 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit SCHMITZ black plastic fuel tank 245l 1 filling neck ; BIO-Diesel proof 385/65R22.5 13311 mm Ibodpoztm S Dsfx Ah Eea 2490 mm 2650 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm