Used Bens 250 for sale (18,650)

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) Cgob Hadst I D Tuoqgot - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, A used Delta ice water cooling unit DKS 250 EF (year of manufacture 2019) is for sale. The appliance is fully functional and in very good condition. - Capacity approx. 200 liters/hour. Cooling water - Cooling approx. 13 - 15 °C below inlet temperature Csb Hadqevgalhjgjgt - Temperature: 0.5 - 2°C - 220-240 V, 50 Hz - Net capacity of the tank: 90 liters - works without pressure pump, can be combined with any water mixing and dosing device. - Stainless steel design - Can be mounted on the wall or in the adjoining room Price on request.

Condition: used, Year of construction: 1991, machine/vehicle number: 49120509, Lg.no. 24358 Technical data : - Horizontal load capacity with 6 suction cups - at 80% operating vacuum 0.25 t - Suction cup diameter 150 mm each Cgsbju Uplue Hadqgot - Suction cup distance adjustable Length up to 2150 mm - Depth min. 200 to 900 mm - Distance or overall height lower edge of suction cup - crane hook 600 mm - Vacuum motor power 0.37 kW - Connection 220 V / 16 A - Space requirement approx. W 2200 x H 600 x D 1200 mm - Weight approx. 70 kg

Condition: used, turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder, turning tool holder, clamp holder, turning tool holder -Turning tool: turning tool holder tool holder -Dimensions: see photos / technical drawing Cgebeu Npftj Hadqgot -Number: 4x turning tool holders available -Price: per piece -Dimensions: Ø 30 x 250 mm -Weight: 1.1 kg

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Closing 25 TO Scrow 25mm Year of manufacture 2003 Sprue picker 2x PIECES Cjb Hadqshrw Amjgegt

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Csb Hevl Skajadqgogt Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. Cgjb Hasnlb Rwjdqgst - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Year of construction: 2008, Condition: good (used), - OFFER 21078 - Technical data: - Load capacity E.-chain hoist 250 kg - lifting speed approx. m/min - Operation of the chain hoist via manual remote button - Man. Procedure hoist / transverse travel + longitudinal travel - track width variable up to approx. 3000 mm - hook height approx. 2200 mm Cgjbsgl Ap No Hadqgst - crane track length approx. 4000 mm - headroom approx. 3500 mm - UK - crane girder approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm H 3500 mm - 2 longitudinal trolley girders approx. 4250 mm - transverse trolley girder approx. 3000 mm - weight of the plant approx. 1000 kg

Condition: used, Compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Wellflex, compensator unused -Type: PN 2.5 DN 250 -Nominal diameter: DN 250 Ø 273 mm / length 285 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 4x dampers available -Price: per piece -Dimensions: Ø 375 x 280 mm Csbsip Rcye Hadqgegt -Weight: 18.1 kg/piece

Year of construction: 2007, Condition: new, Cylinder: 0351-563-00-00 For Angel 250 TO Cylinder completely new BJ ca2007 Cob Hadjd A Nrajqgogt

Year of construction: 1985, Condition: good (used), machine/vehicle number: XXXX, Lg.No. 21392 Technical data approx: - Total payload driven + travelling unit 25000 kg Cgsb Hadjk Eatdsqgot - payload per container device 12500 kg - workpiece diameter approx. 500 - 4000 mm - center distance of the support rollers adjustable - roller diameter 400 mm - roller width 120 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 3500 x H 850 x D 1000 mm - space requirement with running unit approx. W 2700 x H 850 x D 800 mm - Weight of driven unit approx. 1300 kg - Weight with running unit approx. 900 kg

Condition: used, tubular heater, heating band, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating band -Manufacturer: Erge, heating band heating sleeve Cob Haelvylyjdqgogt -Type: Z 1133 Ø 30 x 20 mm -Heating power: 250 W -Voltage: 230 V -Quantity: 1 piece available -Dimensions: 160/70/H50 mm -Weight: 0.1 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm Csbot Dxwge Hadqgogt - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice

Condition: used, chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate Csb Hjuypzvoadqgsgt -Outside: Ø 250 mm -Inside: Ø 100 mm -Hole circle: Ø180 mm/ M10 / Ø230/10 mm -Dimensions total Ø 250 x 23 mm -Weight: 6.1 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: Cob Hadeur Icusqgegt - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for speed - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece Ceb Hsututvoadqgsgt

Year of construction: 1998, Condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW Cob Hadep Ebn Soqgegt - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: used, tires, solid rubber tires, forklift tires -Handover: in current condition as viewed -Tire condition: see photos -Manufacturer: Gumasol, solid rubber tires type Softy 2 pieces -Tire size: 250-15 Csbeur Akgj Hadqgogt -Bolt circle: Ø 230 x 27 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions: Ø 575 x 230 mm -Weight: 65 kg/piece

Year of construction: 2008, Condition: good (used), - OFFER 21077 - Cjb Hoglu R Hoadqgogt Technical data: - Load capacity E.-chain hoist 250 kg - lifting speed approx. m/min - Operation of the chain hoist via manual remote button - Man. Procedure hoist / transverse travel + longitudinal travel - track width variable up to approx. 3500 mm - hook height approx. 2800 mm - crane track length approx. 5000 mm - headroom approx. 3900 mm - UK crane girder approx. 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm H 3900 mm - 2 longitudinal trolley girders approx. 5000 mm - transverse trolley girder approx. 3500 mm - weight of the plant approx. 1000 kg

Condition: used, Year of construction: 2006, filter system, filter device, coolant filter, filter candle system -Manufacturer: Bohncke, filter device type fg-250 -Pump: Type pme-2010 0.53 kW -Filter: Filter candles 20" see photos -Dimensions: 650/340/H1050 mm Ceb Hajurn S Nedqgogt -Weight: 46 kg

Condition: used, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: VEB ILKA, axial fan axial fan -Type: S4D350-AF10-17 Cgob Hjuqq N Ijadqgst -Motor: 25 W 1380 rpm -Voltage: 220/380 V -Dimensions: Ø 380 x 140 mm -Weight: 4.0 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke: 250 mm -Piston rod: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 545/75/H75 mm -Total weight: 5.8 kg Cgeb Hajg Avp Usdqgjt

Condition: used, Centrifugal pump, water pump, stainless steel pump, food pump, peripheral impeller pump, coupling housing magnetic coupling centrifugal pump, motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump carrier -Manufacturer: KTR, pump housing clutch housing Cgebot U Tq As Hadqgot -Type: PL 250/6/ -Dimensions: see photo dimensions -Dimensions: Ø 250 x 135 mm -Weight: 1.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 250 mm -Passage: Ø 80 mm -Clamping plate: Ø 305/60 mm -Bolt circle: Ø 280 mm -Weight: 37 kg Cjb Hajt Sz Iksdqgogt

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h Cob Hot Rbhzsadqgegt -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg