Used Bens 250 for sale (18,650)

Condition: excellent (used), Year of construction: 2023, operating hours: 3 h, Functionality: fully functional, machine/vehicle number: 40.09.302.23, drilling depth: 160 mm, overall weight: 200 kg, rotational speed (max.): 3,000 rpm, For sale is a Felder FD250 in top condition, like new. Cgjlqjvnzaps D S N Ujt since it was used little, only worked on one job, it is no longer needed. The machine was purchased in February 2024. with a table extension made of cast steel One-hand lever operation, comfortable and smooth Heavy clamping eccentric, can be used on the right and left Stop with grid position on the drilling table Chip extraction

Condition: good (used), Self sizing system for closure of cardboard boxes for kit cabinets, counter tops and doors. The system comprises 2 operating stations: 1) Application of upper longitudinal taping along the entire length of the package. 2) Sequential execution of the closure of the top front and back side of the flaps of the box, with subsequent 5 (depending on the width) vertical taping. PRODUCTION: NR. 150 PIECES/HOUR Cololbm Uasq D S N Ujgt STANDARD CYCLE: 24 SECONDS BOX DIMENSIONS: HEIGTH 25/200 MM. WIDTH 300/1000 MM. LENGTH 500/3000 MM. MAX WEIGHT FOR EACH BOX 180 KG.

Condition: used, mileage: 212,560 km, power: 184 kW (250.17 HP), first registration: 10/2003, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2024, gearing type: mechanical, Year of construction: 2003, Equipment: had accident, !! MOTOR only runs on 5 cylinders !!! German vehicle / German vehicle registration document Celqstfzhgs D S N Usgt "ERRORS, TYPING ERRORS AND PRIOR SALE RESERVED"

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm Cgolqodq Tt Ho D S N Uet -Weight: 24 kg

Year of construction: 1998, Condition: used, machine/vehicle number: MBMAKZDoppel, 1 piece - Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 10 pieces are available 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains variable 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both deflection rollers including the blue mounting plates is sold Weight complete approx. 50 kg, connection to 400V 50Hz Colq D Sstn Rite N Uogt TOP condition, fully functional. Not a worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: used, power: 74 kW (100.61 HP), Equipment: ABS, air conditioning, all wheel drive, Pallet fork, top link SK Hyd- KAT 3-2-70 Profi + Setting 2 MZW 540/540E / 1000 rpm Front linkage KAT - 2 relief Engine no. 33AWI.788 MLD104076 Cabin no. M0B113082 Int. vehicle no. ASK number end customer 11014493 Net weight 5,456.000 KG Gross weight 5,456,000 KG Front loader FENDT CARGO 3X/65 DW T298 Fendt 211 S Vario Gen3 Basic tractor L041 Profi+ Setting2 M095 Standard fan G035 40 km/h - version G048 MZW 540/540E/1000 rpm K044 Top link SK hydr. Cat. 3/2/ 70 K129 Front power lift Cat. 2 lag K155 Front PTO 1000 rpm K210 Ball sleeve Cat. 3/2 1 pair for lower link K221 Ball sleeve Cat. 3/2 for top link H006 Additional valves dw 1/1 + 1/2 rear UDK H078 Additional valve dw 1/3 rear UDK H145 Additional valve dw 2/1 front H172 Load sensing system with variable pump H200 Power-Beyond H201 External hydraulic valve actuation C001 Paintwork Nature Green / Rims Terra Red C060 Wipe and wash. rear C072 Automatic climate control C080 Comfort seat with air suspension C122 Terminal 12# C135 Universal holder for mobile phone C165 Brake lever holder device C167 Steering wheel including twist grip C170 Additional equipment holder C182 Mechanical cabin suspension C190 Additional lighting at the front C198 Work light on the front roof LED C207 Work light on the A-pillar LED C219 Tail light / indicator LED C226 Daytime running light C260 Work light on the rear roof LED C299 Radio - CD MP3 with hands-free system E030 Basic lane guidance package E044 RTK NovAtel E110 Contour Assistant E091 Machine control Isobus. A057 Front axle suspension A073 Pivoting front fender Cgjlq D Setvk Ebe N Uet

Condition: used, turret of a Boehringer lathe Cgslqsn Sulme D S N Ujt

Condition: excellent (used), Year of construction: 2004, Arburg 320K 700-250 Injection Moulding Machine Year of manufacture -2004 Control - Selogica CLOSING UNIT Closing force (Ton) 70 Space between columns(mm) 320x320 Diameter of column (mm) 60 Plate size (H x V) (mm) 476x476 Mould height (Max.- Min) (mm) 400-200 Space between the platen (mm) 650 Closing speed (mm/s) 88 (l/min) Opening stroke (Max.) (mm) 250 Ejection force (kN) 30 INJECTION UNIT Screw diameter (mm) 30 Injection weight (Max.) (g) 89 Volume (cm3) 106 Cgjlqsq A Rp No D S N Uet Injection pressure (bar) 1820 Injection speed (cm3/s) 121 Nozzle force (Max.) (Ton) 70 Nozzle stroke (Max.) (mm) 240 Plasticization capacity (g/s) 103.04 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37x1.405x1.99

Year of construction: 2000, Condition: like new (used), Gallus TCS 250 Age: 2000 Available: Immediately Size : 254 mm - Size Length ;max.: 254 mm; min.: 101.6 mm - Stock: Paper:100 to 180 g/m² Cardboard: up to 300 g/m² , max. 0.3 mm Thickness - 2 Letter Printing Units Cgoljgy H Axeq D S N Ujt - 1 Flexo Printing Unit - 3 UV Drying Units Type Uviterno - KB Rotary Die Cutting Unit - Magnetic Cylinders: Z72,74,76,78,80,84,88,92,96,100,104,108,112,116,120,124 - Unwinder with Roll Diameter 1.040 mm - Web and Side Trimming Unit - Webguide - Rewinder with max. roll diameter 300mm - Speed up to 11.000 printings / h - Touch Screen

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Cgjlq Deb Enccj S N Uet -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Year of construction: 1996, Condition: used, machine/vehicle number: MBMAKZ, Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains approx. 1.2m (can also be shortened) Lifting height approx. 3.5m Complete with control cylinder (approx. 3m) Weight complete approx. 60 kg, connection to 400V 50Hz TOP condition, fully functional. No worn or used device! Connect and put into operation. Comes from current operation Cgslqjtn Rire D S N Ust Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), Bezel (28387) SPH 360/250 mm Cgjljmkffdjq D S N Uot Weight 57 kg Dimensions, see drawing

Year of construction: 1985, Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. t Cgjlq Dsgl Dxto S N Uot dimensions of the machine ca. m

Year of construction: 2005, Condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Cgjlq Dsvamqds S N Uot

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Cgeljuiykdjq D S N Uet

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h. Coljtynkvjq D S N Uegt

Year of construction: 2003, Condition: ready for operation (used), There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h. Cgjlq Detyyn Hj S N Ust

Year of construction: 2000, Condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Cjlq D Ssdv Nigo N Uogt

Year of construction: 1990, Condition: ready for operation (used), Center width: 1500mm, center height: 250mm, turning diameter over bed/offset/over facing slide: 500mm/710mm/305mm, bed width: 340mm, spindle bore: 80mm, spindle diameter: 95mm, speed: 1500rpm. Stroke of face slide/top support: 300mm/170mm, top support swivel range: +/-45°, tailstock quill: 80mm, quill stroke: 205mm, motor power: 9kW. Machine dimensions X/Y/Z: approx. 3000mm/1400mm/1650mm, weight: approx. 2700kg. Documentation available. On-site inspection is possible. Cgjlqjuyk Rro D S N Ujt

Year of construction: 2006, Condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Cgjlqjuxdhuj D S N Uet

Year of construction: 1988, Condition: ready for operation (used), Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible. Cslou Nlk Eoq D S N Usgt

Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Cgslqetyax Es D S N Ust

Year of construction: 2002, Condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Cgolq D Sjubyy Ne N Ujt

Year of construction: 2000, Condition: ready for operation (used), Number of axes: XYZC (8-axis), turning diameter: 250mm, turning length: 300mm, spindle diameter: 71mm, speed: 4500rpm, tool holder: BMT-55, number of tool positions: 2 x 12 positions, dimensions X/Y/Z: approx. 4000mm/4600mm/2200mm, weight: approx. 6000kg. Including bar loader Profimat IRCO Breuning, year of construction: 2004, bar diameter/length: 52mm/3000mm, dimensions X/Y: 1200mm/4000mm. Cgslqjtufb Dj D S N Ust

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Colq D S Noilhfcj Usgt