Used Hyundai Hbf 18-3 for sale (150)

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3425C 013, We will provide more detailed information about the equipment during a personal on-site visit, which we recommend. Godjzpwunjpfx Ahdjbu

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Gsdew Dcdyjpfx Ahdsbu Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Gedezdqrpjpfx Ahdjbu Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,055 h, functionality: fully functional, turning length: 760 mm, turning diameter: 420 mm, spindle motor power: 37,000 W, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, overall weight: 6,900 kg, The Hyundai WIA L3000SY represents the flagship model in Hyundai WIA’s turning center lineup, designed for high precision machining, productivity, and long-term reliability. The machine is equipped with true direct-drive spindles (without belts), ensuring excellent torque transmission, high dynamic performance, and improved machining accuracy. Gedoy T Iuijpfx Ahdsbu Key technical features include: • Main spindle: 12” chuck with 37KW • Sub spindle: 6” chuck • True Direct Drive spindles (belt-free design for higher precision and reliability) • BMT65 turret with 24 positions and 12 driven tool stations • Driven tools: up to 5,000 rpm with 7.5 kW power • Through-tool coolant system – 15 bar • Gun coolant system • Digital scales for improved machining precision • Pneumatic part pusher through the sub-spindle, including part flushing with M code • Part catcher on both main and sub spindle • Part extraction conveyor • Bar feeder connection • Bore-Max bar capacity: Ø102 mm • Chip conveyor • Automatic Q-Setter tool measuring system • Latest generation FANUC control • Oil mist / emulsion extraction unit with the machine • Hainbuch main spindle chuck The machine was installed at the customer site in 2020 and has been used only lightly. The current owner is changing production profile, which is why the machine has become available. This configuration offers an excellent opportunity to acquire a high-end multi-tasking turning center with very strong specifications and low operating hours. Machine has regular Maintenance done and machine is working! With box guide design – the most rigid solution used in turning centers.

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100M FANUC 0IT PLUS CNC HIGH POWER TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET, C-AXIS & DRIVEN TOOLS & 12" STD CHUCK Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 740 MM Bar Capacity - Main Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (Rpm) 2,800 RPM Motor (Max. / Cont.) 26.0 / 18.5 KW Torque (Max. / Cont.) 1,123 / 657 NM Spindle Type BELT [GEARLESS] Spindle Nose A2-11 C-Axis Indexing 360° (0.001°) Travel X 265 MM Travel Z 830 MM Rapid Speed X 24 M / MIN Rapid Speed Z 30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.15 SEC / STEP LIVE TOOLS Motor (Max / Cont.) 5.5 / 3.7 KW Gsdpfx Ahjx Thzvjdjbu Milling Tool Speed 5,000 RPM Torque (Max. / Cont.) 70.0 / 35.4 NM Collet Size ER32 - Ø 25 Type BMT65P QUILL TYPE TAILSTOCK [PROGRAMMABLE BUILT IN TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM Tailstock Travel 830 MM TANK CAPACITY Coolant Tank200 L Lubricating Tank 1.8 L POWER SUPPLY Electrical Power Supply 27 [30 GEARLESS] KVA Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 3,885 x 1,800 MM Height 1,850 MM Weight 6,050 KGS STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX MAIN SPINDLE - 2,800 RPM, 26.0 / 18.5 KW, 1123 NM BELT DRIVEN TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM FACTORY FITTED MACHINE OPTIONS CHIP BUCKET STANDARD CHIP CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY) BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - MANUAL PROGRAMMABLE TAILSTOCK IN LIEU OF STDMACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET – BMT65P. 2,800 RPM 26.0 / 18.5 [35.0 / 25.0 GEARLESS] KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. C-AXIS MAIN SPINDLE. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET.

Condition: used, functionality: fully functional, gearing type: hydrostat, overall weight: 1,995 kg, Year of construction: 2019, operating hours: 865 h, Equipment: rubber tracks, Manufacturer: Hyundai Model: R18-9 Type: Mini excavator Year of manufacture: 07/2019 Gbsdpfx Asz Hyafohdju Used, with signs of wear, good condition Operating hours: 865 h Power: 13.6 kW Weight: 1,995 kg Next inspection: 12/2023 Transmission/Gears: Hydrostatic/stepless Number of cylinders: 3 Digging depth: 250 mm Front dozer blade Cabin with heater Adjustable windshield Swiveling monoblock boom Mechanical quick coupler Saris Magnum Explorer Force One trailer First registration: 05.10.2023 Dimensions: 306 x 170 x 30 cm Permissible total weight: 3000 kg Payload: 2365 kg MOT valid until 08/2028 Equipment Magnum Explorer Force One trailer: Tandem axle, braked 14-inch wheels Steel fenders Hot-dip galvanized welded tub V-shaped drawbar, steel, hot-dip galvanized Heavy-duty lashing eyes 2 adjustable heavy-duty ramps at the rear An inspection is possible by appointment.

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV Gbodpjx Thu Njfx Ahdeu STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 26,390 kg, drive condition: 75 %, Year of construction: 2023, operating hours: 2,360 h, Equipment: UVV, adjustable boom, gripper hydraulics, hammer hydraulics, Hyundai, Crawler Excavator, HX235ALCR ENGINE Cummins B6.7 / STAGE V Engine Power: 173 hp (129 kW) at 2,200 rpm HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power Modes, 2 Work Modes, User Mode Variable Power Control Electronic Pump Flow Control (EPFC) Flow control for attachment mode Idle Auto Function Automatic Engine Shutdown Electronic Fan Control CAB AND INTERIOR CAB ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12V power outlet (24 VDC to 12 VDC converter) Electric horn All-weather steel cab with 360° panoramic view Safety glass, toughened Windshield as a sliding window Sliding glass window (left) Lockable door Storage compartment and ashtray Transparent cab roof liner Sun visor Door and cab locks, one key Pilot-controlled joystick with pre-control pressure assist Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheater) CENTRAL MONITORING 8" LCD display Engine RPM or odometer/speedometer Engine coolant temperature gauge Maximum power Slow/fast travel speed Idle Auto Function Overload warning with alarm Engine check Air filter clogged Indicators ECO indicators Fuel level indicator Hydraulic oil temperature indicator Fuel preheater Warnings Communication error Low battery capacity Clock SEAT Mechanically suspended, heated driver's seat CAB WITH ROPS ROPS (Rollover Protective Structure) ISO 12117-2 SAFETY Work Mode Master switch, battery Rear-view camera Four front work lights (2 on the boom, 2 on the front frame) Driving alarm Electronic swing parking system Boom holding system Stick holding system Boom cylinder safety valve with overload warning device Two exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V × 100 Ah) Accumulator for lowering work equipment UNDERCARRAGE Lower frame cover (standard) Ground plates Triple-plate ground plates (600 mm) Track roller guides Boom 5650 mm (Variable length boom) Boom safety valves (Variable length boom) Stick 2920 mm Stick safety valve (on variable length boom) With bucket linkage Upper carriage for variable length boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for rotation function Lines for quick coupler Long crawler undercarriage with blade holder Ground plate 1 pedal (Variable length boom/2-way) Crawler tracks 600 mm (triple-plate) Front blade Reinforced lower frame plates 19 inch Kawasaki joysticks + EPFC Proportional joysticks Fine swing control Swing lock One-pedal straight-line travel system Air-suspended, heated seat SmartKey + button + auto shutdown Fuel filling pump Air compressor Gsdpfx Ahszdrblodobu Hyundai HX paint With work light on the boom (LED) Work light at the front of the cab (LED) Work light at the rear (LED) All-around view monitor (AAVM) FOG protection (front and top) Laminated 7mm window glass Fuel preheater Central lubrication Beka (Variable length boom) (Europe) Hydraulic oil - VG46 Turbo II air precleaner Hydraulic quick coupler CW40 with LH, with one digging bucket

Condition: good (used), Year of construction: 1998, Control system: HiTROL-840C Max. swing diameter: 510 mm Max. turning diameter: 320 mm Max. turning length: 1,000 mm Z-axis travel: 1,020 mm X-axis travel: 200 mm Spindle speed: 3,000 rpm Spindle nose: A2-8 Bar passage: 70 mm Main spindle motor: 22 kW / 30 hp Godezx Hziopfx Ahdjbu Machine weight: approx. 5.3 t

Condition: new, Year of construction: 2026, machine/vehicle number: 20260303040, fuel type: diesel, power: 502 kW (682.53 HP), motor manufacturer: Hyundai DP180LA, General information Field of application: Construction Weights Empty weight: 5.542 kg Functional Generator capacity: 630 kVA Dimensions of cargo space: 441 x 180 x 250 cm Other information Fuel consumption: 123 Liter per Hour at Prime Power ( 90% ) Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Gbjdjyhlfyopfx Ahdju Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Year of construction: 2019, Vertical CNC lathe – 3 axes Brand: HYUNDAI WIA Type: LV 800 RM Year: 2019 (575 cutting hours) CNC: FANUC 32iB + manual guide Specifications: Turning capabilities: Maximum swing diameter: 890 mm Maximum turning diameter: 800 mm Maximum turning height: 800 mm Horizontal travel: 440 mm Vertical travel: 800 mm C-axis: 360,000 positions 3-jaw hydraulic chuck: Diameter: 530 mm Rotation speed: 2000 rpm Main motor power: 37/30 kW Dimensions (width x depth x height): 2000 x 2877 x 3300 mm Weight: 11 tons Gsdpfxoz Iqlne Ahdsbu Equipped with: 12-tool turret C-axis 0.001° Rotating tool spindles 7.5 kW, 3000 rpm Through-tool coolant supply 20 bar Renishaw Quickset Rotating tool holders: 3 x axial, 3 x radial Turning tool holders Set of chuck jaws Manual 3-jaw chuck, dia. 630 mm Chip conveyor

Condition: refurbished (used), Year of construction: 2014, turning diameter over cross slide: 480 mm, turning length: 680 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, spindle motor power: 22 W, Brand: Hyundai-Wia Model: L-300/MSA Category: CNC Lathes Year of manufacture: 2014 CNC Control: FANUC Series 32i-Model A Machine weight: 7,000 kg Machine dimensions: Length: 4,780 mm Width: 2,055 mm Height: 2,000 mm Capacity: Maximum swing over bed: 750 mm Maximum swing over carriage: 480 mm Maximum turning diameter: 410 mm Gsdpjx Elzksfx Ahdsbu Maximum turning length: 680 mm Bar capacity (spindle/sub-spindle): 76 mm / 65 mm Travel: X-axis: 290 mm Z-axis: 750 mm ZB-axis: 700 mm C-axis: 360° (minimum indexing angle: 0.001°) Spindle: Spindle diameter: 254 mm Spindle speed: 3,500 rpm Spindle nose: ASA A2-8 Spindle motor power (max./cont.): 22/18.5 kW Minimum C-axis control angle: 0.001° Sub-spindle: Sub-spindle diameter: 210 mm Sub-spindle speed: 4,000 rpm Spindle nose: ASA A2-6 Sub-spindle motor power (max./cont.): 11/7.5 kW Minimum C-axis control angle: 0.001° Turret: Turret stations (live tool capable): 12 Live tool speed: 4,000 rpm Live tool motor power (max./cont.): 5.5/3.7 kW Turning/boring tool dimensions: 25x25 mm or 50 mm Rapid traverse: X / Z axis: 20,000 mm/min Z axis: 24,000 mm/min Accessories and additional features: Chip conveyor Coolant tank with 20 bar high-pressure wash pump Automatic tool setter with push button and M code (down/up) Various live and static tool holders included Comprehensive documentation: manuals, electrical diagrams, CE declaration

Condition: used, Year of construction: 2014, operating hours: 5,581 h, lifting height: 4,690 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, fork length: 1,070 mm, fork width: 1,075 mm, total height: 2,200 mm, total length: 2,450 mm, total width: 1,190 mm, color: yellow, Empty weight: 4.900 kg Lifting capacity: 3.000 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes Gsdezwcimopfx Ahdebu - Serial number: HHKHHU03EE0000073K - Operating hours: 5581 - Lifting capacity: 3000kg - Lifting height: 4685mm - Overhead clearance: 2200mm - Free lift: 1430mm - Fork length: 1070mm - Maximum fork width: 1075mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Non-marking tires, Free-lift, Work lights - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: Hawker/80V 5 PZS 775 - └ Battery year of construction: 2014 - └ Capacity: 775Ah - └ Battery voltage: 80V - └ Tray length [mm]: 1025 - └ Tray width [mm]: 850 - └ Tray height [mm]: 790 - Transport dimensions: 2450mm x 1190mm x 2200mm (l x w x h) - Transport weight [kg]: 4900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), functionality: fully functional, machine/vehicle number: HHIHHH02HB0000320, Year of construction: 2011, operating hours: 9,791 h, load capacity: 1,190 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, fork carriage width: 1,800 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), overall weight: 3,156 kg, Equipment: CE marking, UVV, fork extension, full service history, hydraulic fork positioner, lighting, pallet forks, retractable fork, sideshift, Hyundai 18L-7 forklift – 1.8 tons – Triplex mast – TDL hydraulic fork spreader Due to the renewal of our equipment fleet, we are offering for sale our Hyundai 18L-7 forklift. This machine belongs directly to our company and has been used in our workshop, with regular maintenance. FEATURES: • Year: 2011 • Hours: 9,791 h • Lifting capacity: 1,190 kg • Triplex mast • Lifting height: 4,700 mm • Forklift weight: 3,156 kg • Forks: 1,200 mm • Solid cushion tires • Side shift • TDL hydraulic fork spreader • Fork extensions included • Front and rear lights • Turn signals • Rotating beacon • Windshield wipers MAINTENANCE AND DOCUMENTATION: • Forklift in very good working condition • Regular maintenance • Spark plugs replaced in November 2025 • Maintenance log available • Certificate of conformity provided The forklift is currently in our workshop and can be viewed and tested in operation by appointment. Gedpfx Aozz Iu Nshdebu Additional photos and videos are available upon request. Delivery can be arranged depending on the destination. Price: €9,250 (excluding VAT) VAT is recoverable.

Condition: used, first registration: 06/2016, Year of construction: 2016, operating hours: 9,837 h, HYUNDAI HL 730-9 A wheel loader with mulching bucket and clamshell bucket, automatic climate control • All-wheel drive • Year of manufacture: 2016 • Operating hours: 9,835 • Approx. 27,000 km Attachments: • Mulching grapple bucket / clamshell bucket • Bucket capacity: 2 m³ • Power (kW / HP): 100 / 136 • Operating weight: 10,500 kg • GVW: 15,500 kg • Last safety inspection: 14/11/2022 Additional equipment: • Automatic climate control • Reversing camera • CD radio Gbedowmpfpspfx Ahdju • Comfort seat • Automatic / torque converter transmission - German machine, always maintained / all servicing performed by authorized workshop!! - One owner! - Ready for operation! Errors and prior sale excepted!

Condition: used, Year of construction: 2014, operating hours: 460 h, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Model: F400 Year of Manufacture: 2014.05 Gbjdpjzxgvmsfx Ahdju Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer 12,000 rpm spindle Chip conveyor Cooling system Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2023, operating hours: 4,531 h, 2023 | Hyundai HX300ANL | Used Tracked Excavator | 4531 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 116000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Gbedpfjzrm R Dox Ahdju 64 inspection points 55 approved ✅ 6 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Operating excavator ,rattling hydraulic pump , 2 broken front windows,noisy drivetrain (drivelugs and underrollers), machine needs a good cleanup and service , low on hydraulic oil , quicklock has a lot of play 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41099 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, power: 240 kW (326.31 HP), fuel type: diesel, color: gold, operation weight: 32,000 kg, Year of construction: 2008, operating hours: 11,000 h, Hyundai R320 NLC-7A tracked excavator Gbodpfx Ahoy Em Ekodsu Year of manufacture: 2008 11,000 hours 32,000 kg 240 kW Automatic air conditioning Oilquick OQ80 SW fully hydraulic quick coupler 3 m transport width

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,660 h, spindle motor power: 15,000 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 580 mm, total height: 2,225 mm, total width: 1,725 mm, bar diameter (max.): 65 mm, overall weight: 4,570 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, product length (max.): 3,039 mm, workpiece diameter (max.): 335 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details. Spindle hours total 24,660Control Unit: FANUC Series 18i-TBVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 33 kVAFull Load Current: 51 AControl Voltage: AC 110 V / DC 24 VSwing Over Bed: Ø630 mm (24.8")Swing Over Carriage: Ø390 mm (15.4")Max. Turning Diameter: Ø335 mm (13.2")Max. Turning Length: 455 mm (17.8")Bar Capacity: Ø65 mm (2.6")Chuck Size: Ø210 mm (8")Spindle Bore: Ø76 mm (3")Spindle Speed Range: 45–4,500 rpmSpindle Motor (Continuous): 15/11 kW (20/15 HP)Spindle Motor (Maximum): 25.4/18.5 kWSpindle Torque (Continuous): 254.2 NmSpindle Torque (Maximum): 597.7 NmSpindle Nose: A2-6Rapid Traverse X/Y: 24/24 m/minRapid Traverse Z: 18/12 m/minSlide Type: Box GuideTurret: BMT65OD Tool Size: □25 × 25 mmID Tool Size: Ø50 mm (2")Indexing Time: 0.2 sec/stepX-Axis Motor: 5.5/3.7 kWZ-Axis Motor: 5.5/3.7 kWTorque: 5,000 NmCoolant Tank Capacity: 220 L (58.1 gal)Lubrication Tank Capacity: 0.9 L (0.5 gal)Power Requirement: Over 35 kVAMain Spindle Chuck: Samchully MH-208Sub Spindle Chuck: Samchully HS-06Chuck Jaws optional Technical Specification Gbsdjzimmgopfx Ahdou Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), functionality: fully functional, power: 158 kW (214.82 HP), Year of construction: 2017, machine/vehicle number: HHKHZ803EF0000242, excellent condition Gedpfxoz Akdvo Ahdobu

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Gsdpfxsx Tqkme Ahdsbu Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: like new (used), functionality: fully functional, machine/vehicle number: HMKHFY10GHF0000754, Year of construction: 2023, operating hours: 1 h, load capacity: 1,800 kg, lifting height: 6,035 mm, free lift: 2,105 mm, fuel type: electric, construction height: 2,624 mm, No minimum price – guaranteed sale to the highest bidder! Machine in new condition with only one operating hour! Gbodpfxjza T Tce Ahdsu TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,035 mm Free lift: 2,105 mm Overall height: 2,624 mm MACHINE DETAILS Fuel type: electric Mast type: Triplex Weight (without battery): 3,739 kg Battery voltage: 48 V Minimum battery weight: 950 kg Maximum battery weight: 1,140 kg External reference: SL18112SP Note: Sale is without battery and charger.

Condition: excellent (used), functionality: fully functional, power: 158 kW (214.82 HP), shovel volume: 2.5 m³, suspension: hydraulics, Year of construction: 2013, machine/vehicle number: HHKHZ803CD0000062, The machine is in excellent condition. Gbodpfx Ajyllq Rohdeu

Condition: used, • Manufacturer: Hyundai • Model: Robex R360LC-7A • Year: 2008 • Hours: Approx. 13,500 hours • Q-coupler: B30 • Weight: 36,500 kg • Undercarriage: 40% • Accessories: Bucket with teeth, C-lubricant, Heater, A/C Gjdpjz Rpz Ijfx Ahdebu Technical specifications: Year of manufacture: 2008 Operating hours: 13,250 h Weight: 36,500 kg Serial number: 10027 Emission stage: Stage V Engine type: Diesel Bucket/shovel capacity: 2 m³ Track width: 80 cm Certificates: EPA, CE Delivery terms: EXW Location: Bro, Stockholm County, Sweden Equipment: Hydraulic quick coupler, monoboom, hammer hydraulics, hammer and shear hydraulics, boom hose rupture valve, stick hose rupture valve, air conditioning, additional hydraulics, digging system, tool attachment, track support, rotator hydraulics, engine heater, main switch, rotating warning light, central lubrication, diesel heater, joystick control, sliding rails, standard bucket, slope hydraulics, shear hydraulics, deep digging system

Condition: used, Year of construction: 2023, operating hours: 647 h, functionality: fully functional, CNC lathe Hyundai WIA HD2600 – Year of manufacture 2023 – Top condition For sale is a CNC lathe Hyundai WIA HD2600 from 2023. Technical data: Manufacturer: Hyundai WIA Model: HD2600 Year of manufacture: 2023 Gbjdpfxszdcinj Ahdju Operating hours: only 647 h Condition: very good condition, almost new Chuck: SCHUNK Ø 400 mm Sale can include the chuck upon request The machine has been used very little and is in excellent technical and optical condition. It is ready for immediate use and can be inspected by appointment. Advantages: Very low operating hours Powerful and precise CNC lathe High-quality SCHUNK chuck Ø 400 mm Immediately available We are happy to provide you with further information, technical details or a customized offer. Parameter Value Max. turning diameter 460 mm Max. turning length 659 mm Diameter of rotation over bed 630 mm Diameter of rotation over slide 460 mm Spindle bore 91 mm Max. bar diameter 80–81 mm Spindle speed 3,500 rpm Spindle power 26 / 18.5 kW Spindle torque 734 Nm Spindle nose A2-8 X-axis travel 265 mm Z-axis travel 680 mm Rapid traverse X/Z 24 / 30 m/min Turret 10 stations Tool holder 25 mm / Ø50 mm Tailstock MK5 (Morse taper 5) Machine weight approx. 5,800 kg