Used Ciata 140 for sale (8,688)

Year of construction: 2022, Condition: new, Spray booth Model:Coral Type:Technodray 2,5 NB Year:2022 Strong construction built in galvanized panels. Standardincluded ventilator with spark proof impeller Fob Eeikq Rls Ry Snjgb filter and lamp IP65 NA = standard execution NB = Extended walls and roof Techn info: Ventilator motor 2,2 Kw Working hight 1970 mm Working depth 1330mm Power:400 volt, 50 Hz 3 phase Total dimension: Hight: approx. 2100mm Lenght 2570mm Depth:2375mm Dimension for transport approx. 2600x1400x2200mm (lxwxh) Weight approx.700Kg For waterbased color (not atex) Options: Rotating table Paper filter 60x48mm in cardboard frame Elektric cabinet for start/stop ventilator Stock no: 2000996 OBS!Some pictures shown can be with options not included as standard

Condition: used, mileage: 403,000 km, Year of construction: 2014, Serial number: WMA26SZZ3EL06xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19424 Specifications: - Km: Approx. 403,000 (can increase) - Transmission: Automatic - Engine brake/Retarder - Suspension: Steel - Euro 6 - Tires (see pictures) - Trailer hitch - VBG - Nor slep Tipper box - Snow rigged - 6x4 - Extra light - Rotor lamps - Light bar - 540 HP - Box (see pictures) - Bed - Radio/CD - Air conditioning/AC - Ready for delivery Description: MAN TGS from 2014 with Euro 6 engine. The truck is snow rigged and ready for delivery. 6x4 with 403,000 km. Fjb E Rsvyfydjy Snegb Video is attached. Km: 403000 HK: 539 Technical approved: Yes EU-approved until: 15.10.2025 Own weight: 13850 Total Weight: 28000 Payload: 14075 Width: 255 Length: 741,1 Euro: 6 Gearbox: Automatic

Condition: excellent (used), Year of construction: 2008, x-travel 1500 mm y-travel 1300 mm z-travel 600 mm Control HEIDENHAIN TNCi 530 spindle turning speed range 18000 U/min tool taper HSK-A 63 tool change unit 30 Pos. table dimension - longitudinal 2000 mm table dimension - cross 1100 mm spindle drive 26 kW column daylight 1400 mm Fgsb E Rsvwgriey Snob weight of the machine ca. 19 t dimensions of the machine ca. 5 x 2,4 x 3,6 m This fpt Raid portal milling machine is in very good condition and can be inspected under power at the seller's premises by arrangement. Description: Spindle hours approx.: 15.000h Tool measurement BLUM Laser

Condition: good (used), IWT Utensil / Crate Washer Fgsb Eswh A E Eo Ry Snjb Model 9LAV65 Year 2009 316 stainless steel throughout. Pull out twin racks, both are removable, dimensions of each rack 1400mm W x 900mm D 330mm between racks Total wash area 1400mm W x 760mm H 3 dosing pumps - wash agent, detergent, rinse agent Also one mobile rack on castors for unloading of washed product on removable racks Heating source - hot water or steam Wash pump and rinse pump Digital control panel Stainless mesh screen filter in main wash area

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Fgeb Eengz N Is Ry Snsb 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: good (used), Year of construction: 2016, Pad Printing Machine Manufacturer: TIC Type: PRK4S165 Fgob E Rsv Ayd Njy Snjb Year of Manufacture: 2016 4-Color Printing Machine Pad Pressure: Approx. 270 kg Electropneumatically Controlled Closed Ink System Ink Cup Diameter 140 mm Plate Size W/D: 4 x 150 x 320 mm Height-Adjustable via Spindle Pneumatically Controlled Sliding Table Floor-Standing Model 080525ä

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min Feb E Ry Sev I Ur Senogb P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: used, Year of construction: 2012, Serial number: W09140345CPC0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18014 Fob E Ry Ssvg Rrlonjgb Specifications: - 2012 model - Air suspension - Tires (see pictures) - Length: 1,134 cm - Width: 255 cm - Wheelbase: 132/138 cm - Net weight: 10,500 kg - Max payload: 34,000 kg - Sliding axles Description: 2012 Carnhel tipping semi. Ready for delivery. Technical approved: Yes EU-approved until: 22.10.2025 Own weight: 10500 Total Weight: 44500 Payload: 34000 Width: 255 Length: 1134

Condition: used, Year of construction: 2019, operating hours: 113 h, 2019 | JLG | JLG 3246ES (9,68m) | Used Scissor Lift | 113 hours 📍Location: France, Les Chères 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 14000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 30 inspection points 28 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in perfect working order ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38004 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Fgebswhgx Ne E Ry Snob ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Universal temperature control unit WEINREICH type WTD 4 Serial no.: 11932217 Year of construction 1993 Temperature max. 140°C Operating overpressure max. 6 bar Pump capacity 30 l/min. Tank volume 4 liters Heating capacity 4 kW Cooling capacity of heat exchanger 15 kW Pump motor output 0.37 kW Circulating water flow + return G 3/8" Cooling water flow + return G 3/8" Total output 4.4 kW Mains connection 380 Volt, 50 Hz, CEE plug Fgsb E Reg Rhx Ujy Snob - Temperature control medium water - Temperature control with actual and setpoint display STÖRK-TRONIC type ST 96-35.02K - SPECK water circulation pump - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Mobile on 4 castors Dimensions L x W x H 620 x 260 x 670 mm Weight 55 kg good condition

Condition: ready for operation (used), Year of construction: 2023, Control Unit Model S840D with CELOS Brand SIEMENS Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 85 kW (10% ED), 50 kW (continuous) Tool taper HSK-A100 Number of axis 4 Movement X-Axis Movement 1400 mm Y-Axis Movement 1200 mm Z-Axis Movement 1350 mm Additional Equipment Center through-spindle coolant system External chip conveyor with rear discharge, drum filter type Oil Skimmer Mist Collector: ZeroFOG #2 (built-in) Feb E Rjv D R A Ejy Snegb Renishaw OMP60 Probe CELOS IoT Connector // CELOS NETservice // Machine Data Connector (MDC) 3D Machine Model Data Dry Anchor Outside Step for Machining Area Side // Outside Step for Setup Station Side Multi Dry Filter This 4-axis DMG MORI NHX 8000 horizontal machining centre was manufactured in 2023. It features a Siemens S840D control with CELOS, XYZ travels of 1,400 / 1,200 / 1,350 mm, and a pallet size of 800 x 800 mm. The spindle operates at 16,000 rpm with a power of 85 kW and uses an HSK-A100 taper. Tool storage capacity is 60, and it includes a Renishaw OMP60 probe. For more information about this horizontal machining centre, please reach out to us. Application Types Milling

Condition: good (used), mileage: 234,639 km, power: 220 kW (299.12 HP), first registration: 08/2019, fuel type: diesel, color: silver, axle configuration: 4x2, tire size: 285/70R19,5, fuel: diesel, wheelbase: 5,400 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,490 mm, loading space length: 7,290 mm, loading space height: 2,620 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, trailer coupling, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Short cabin - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Own weight: 7140 kg, Gross weight: 15000 kg, Total tank capacity: 125 litres, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 1, Suspension type: Air suspension, Cabin type: Short cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: Silver, Metallic, Engine manufacturer: Mercedes, Engine power: 220 kW (295 Hp), Euro: 6, Gearbox type: Telligent, Gears: 6, Power steering, ABS, ASR, Tail lift, Tail lift design: Tailgate, Tail lift load capacity: 1500 kg, Tail lift manufacturer: B.A.R cargo lift, tail lift material: aluminum, tail lift size: 181 x 252, AIRBAG / ACTIVE BRAKE ASSIST / DIFF. SPER / TAILLIFT / HIGH PERFORMANCE ENGINE BRAKE / AHK = More information = Drivetrain Engine brand: MB Gearbox Gearbox: 6 gears, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; tire profile left: 9 mm; tire profile right: 10 mm; suspension: leaf spring Axle 2: twin tires; tire profile left inside: 12 mm; tire profile left outside: 12 mm; tire profile right inside: 11 mm; tire profile right outside: 11 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 948 x 255 x 380 cm Weights Empty weight: 7,140 kg Payload: 7,860 kg GVW: 15,000 kg Functional Tail lift: B.A.R cargo lift, tailgate, 1500 kg Height of loading area: 114 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price Fgjb E Rjvck Irjy Snjb • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Year of construction: 2011, Condition: used, KOLBUS Casemaker DA 260 with board cutting device PS year 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Configuration: - board magazine for manual loading - cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - miss cloth control during the separation process - counter stacker delivery with following roller conveyor incl. table - moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - cloth cylinder with grippers and exchangeable plates for rubber pad (5 pieces 500 mm wide and 5 pieces 720 mm wide, incl. 10 pieces of rubber pads) - glue application adjustment from outside of the machine - viscosity control device for automatic water supply to ensure constant glue viscosity with pump - pressing roller device for crease-free connection of the cover material with boards and spine strip - device for producing padded cases - automatic case counter - single case request for control purposes done from the operating side - stack delivery Special equipment: - board cutting device PS Technical specifications: mechanical speed: up to 40 cycles/min open cover size max.: 670 x 390 mm open cover size min.: 205 x 140 mm joint width: 4 - 15 mm spine width: 14 - 120 mm turn in width closed: 8 - 15 mm cloth width: 223 - 708 mm cloth height: 130 - 428 mm board thickness: 1 - 4 mm board width: 95 - 328 mm board height: 140 - 390 mm board centre strip thickness: 1 - 4 mm board centre strip width: 6 - 90 mm centre strip roll thickness: 0,3 - 0,6 mm centre strip roll width: 6 - 90 mm Febjwhdife E Ry Snogb

Condition: used, mileage: 158,000 km, Year of construction: 2023, Field of application: Freight transport Serial number: XLRTSF5300G46xxxx Fgob E Ry Sovyfn Ujnob Please contact ATS Norway AS for more information Please provide reference number upon request: 19586 Specifications: EU approved until: 18.07.2025 Model year: 2023 Mileage: approx. 158,000 Transmission: Automatic Tires: Good condition Length: 717 cm Width: 255 cm Wheelbase: 340/140 cm Curb weight: 9,310 kg Drivetrain: 6x2 Power: 530 hp Tool cabinet Compressor horn Refrigerator 2 beds Radio/CD Air conditioning/AC Description: 2023 DAF XG 530 6x2 tractor unit for sale. This tractor unit is EU approved until 18.07.2025 and is ready for operation. It has an automatic transmission and is well equipped with, among other things, a tool cabinet, a refrigerator, and two beds. The vehicle can be delivered at short notice. Km: 158000 HK: 530 Technical approved: Yes EU-approved until: 18.07.2025 Own weight: 9310 Total Weight: 27000 Payload: 17690 Width: 255 Length: 717 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Technical data Workpiece length at least 210 mmEdge thickness 0.4 mm – 2 mmMotor voltage 3 x 400 VWorkpiece width at least 95 mmWorkpiece thickness10 mm – 45 mm Joining unit application-controlled – can be switched off Fjb E Rswhuipoy Snogb Continuous edge feed via support plate Edge feed for roll materials from 0.4–2 mm thickness, strip edge banding with individual feed Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate) Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller Gun shear unit with 2 cutting knives for end cutting Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges Tooling for radius 2 mm Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections Polishing unit, 2 motors, 1400 rpm, 900 W Control panel with LCD display and keypad Workpiece transport via chain conveyor Feed speed 7 m/min (~ 250lfm/h) Extendable workpiece support Optional equipment Surface scraper, can be switched on mechanically Spray device for cleaning agent on polishing unit (!21/!30A) with infrared heating lamp for preheating the panel edge Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes Fgjb Eswbankj Ry Snsb BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Year of construction: 2011, Condition: ready for operation (used), This profile bending machine was manufactured in 2011. It features an automatic transport system for semi-finished LVT panels, with processing capabilities ranging from 500 mm to 2000 mm in length and 140 mm to 600 mm in width. The system includes longitudinal and cross machines, each equipped with 6 milling motors, ensuring precise profiling. If you are looking to get high-quality profiling capabilities, consider the HOMAG PROFI FPL 525/6/04/PW/V LVT machine we have for sale. Contact us for further details. Application Types Profiling Fgob Ejwh A S Ej Ry Snob

Condition: good (used), mileage: 880,870 km, power: 324 kW (440.52 HP), gearing type: automatic, fuel type: diesel, color: other, tire size: 315/80R22,5, axle configuration: 6x4, first registration: 01/2010, emission class: euro4, suspension: steel, Year of construction: 2010, Equipment: ABS, air conditioning, cruise control, trailer coupling, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Power take-off - Pump - Sleeping cabin = Remarks = Number of axles: 3, Configuration: 6x4, Own weight: 13210 kg, Gross weight: 29600 kg, Total tank capacity: 450 liters, Trailer coupling, Kingpin diameter: Special, Number of locks: 2, Suspension type: Leaf spring, Cabin type: Sleeping cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: Multi-colored, Engine manufacturer: Volvo, Engine power: 324 kW (434 Hp), Euro: 4, Gearbox type: I-Shift, Gears: 12, Power steering, ABS, Power take-off, Body material: Steel, Number of sides: 1 side, Drum volume: 13, Drum volume in: m3, Pump = More information = General information Cabin: Sleeper cabin Registration number: KLEYN1 Drivetrain Engine brand: VOL Gearbox Gearbox: 12 speeds, automatic Axle configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring Axle 1: Steered; Tire profile left: 6 mm; Tire profile right: 10 mm Axle 2: Twin tires; Tire profile left inside: 10 mm; Tire profile left outside: 9 mm; Tire profile right inside: 9 mm; Tire profile right outside: 9 mm Axle 3: Twin tires; Tire profile left inside: 12 mm; Tire profile left outside: 11 mm; Tire profile right inside: 11 mm; Tire profile right outside: 11 mm Dimensions Dimensions (L x W x H): 799 x 255 x 312 cm Wheelbase: 390 cm Weights Empty weight: 13,210 kg Payload: 16,390 kg GVW: 29,600 kg Functional Fgjbeux Aiws E Ry Snob Dimensions of the loading area: 508 x 238 x 110 cm Height of the loading area: 140 cm Pump: Yes Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1972, total power requirement 50 kW weight of the machine ca. 3,6 t magnetic table diameter 500 mm max. distance between table and spindle-nose 350 mm table speeds 20 > 80 m/min Technical information: - Length L -- R: 2000 mm - Depth V -- H: 2250 mm - Height: 2400 mm - Weight: 3.6 tonnes Additional information: - Type: SWR 50 T - Magnetic table, diameter: 500 mm - Max. Distance between table and spindle: 350 mm - Table speed: 20 > 80 rpm Fgebev Svb Ne E Ry Snob - Sanding speed: 1400/2800 rpm

Condition: used, Year of construction: 2004, Dear Sir or Madam, We are offering a used "BERG UND SCHMID" aluminum cold circular saw in good condition. Model: "Multi Cut 500HA PENTA" Digital miter angle display Infinitely adjustable saw feed Two pneumatic vertical vices Ball-bearing rotary table for miter and rip cuts Mist spray system Year of manufacture: 2004 Serial number: 091 Technical specifications: HM saw blade Ø 500 x 4.2/3.6 x 30 mm Cutting range [mm] 90° 45° left 45° right Round 160 140 140 Square 140 120 120 Rectangle 100x200 100x150 100x150 Fobowhmy Hs E Ry Snsgb Speed: 2800 rpm Infinitely adjustable feed speed External dimensions W x D x H: 85 x 105 x 145 cm Weight: 350 kg Accessories: Discharge length stop with roller conveyor ST 260 roller width 260 mm, made of plastic, 4.0 m

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements width 1520 Measurements depth 2000 Measurements height 2140 Machine weight 2800 Control Unit Brand HEIDENHAIN Fgjb E Rewh A Srjy Snjb Model TNC 310 Main Drive Spindle speed range 4500 Number of axis 3 Movement X-Axis Movement 500 mm X-Axis Rapid Traverse 5 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 5 m/min Z-Axis Movement 400 mm Z-Axis Rapid Traverse 5 m/min Table Outer length 700 mm Outer width 500 mm Tslots size 63 mm Distance between 14 H7 Table load 200 kg This 3-axis DECKEL DMU 50 vertical machining center was manufactured in 2003. It features a Heidenhain TNC 310 control, electronic handwheel HR 150, and a main drive speed of 4,500 min-1. The machine offers a rapid traverse of 5 m/min and a maximum load capacity of 200 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL DMU 50 machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Year of construction: 1974, min. module 1 max. module 10 voltage 220/380 V frequency 50 Hz hole in dividing head spindle 145 mm total power requirement 14 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,5 x 2,3 x 1,8 m 1) Working area: - Largest module to be milled: 10 - Largest travelling distance of the table slide: 695 mm - Largest centre distance: 870 mm - Largest workpiece diameter dk2: 300 mm - Smallest number of teeth that can be milled z2min Machine with 2-speed indexing gear: 4 Machine with 1-speed indexing gear: 8 2) Dimensions: - Bore of dividing head spindle: 145/141 mm - Centre distance between milling cutter and workpiece min. 50 mm max. : 170 mm - Largest clampable hobbing cutter Length b1: 170 mm Diameter dk1: 150 mm - Diameter of cutter arbours (standard accessories): 32, 40 mm - Drive taper for milling arbours: 5 Morse taper - Taper for tailstock centre: 4 Morse tapers - Largest tangential path i+: 60 mm 3) Speeds and feed ranges: Fgsb E Rsvkyamjy Sneb - Milling cutter speeds: 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355 rpm - Axial feed: 0.25 .... 4 mm/WU - Radial feed: 0.175 .... 0.995 mm/WU

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 14000 rpm Number of axis 4 This 4-axis DMG MORI DMC 1150 vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and advanced control features. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 1150 machine we have for sale. Contact us for more information. Fgjb E Ry Sowh A Tvjneb Application Types Milling

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Fjboul Etdj E Ry Snjgb Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: like new (used), amount 39 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, Various broaches in a complete package, with cabinet. Quantity= 39 pcs. Fgebsu A I A Do E Ry Sneb Unit price per piece = 140,00€ / per piece Complete purchase with cabinet = 120,00€ / per piece