Used Ciata P-100 Hem for sale (57,356)

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us. Isdpfx Aozuuimepmjba

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm Iodpfx Apjhrmlgsmjba max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26180X.30 Serial Number blocking unit: 136 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26180X.40 Serial number empty pallet dispenser (pallet terminal): 78 Includes pallet conveying, reference-no: 26180X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. Infeed with blocking unit & turning device. The palletizer builds single rows of bundles which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26001X.30 Serial Number blocking unit: 152 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With Slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26001X.40 Includes pallet conveying, reference-no: 26001X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Ibedjhrigqjpfx Apmja Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Color: Blue Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg Ibjdpehrmk Refx Apmoa max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min Ibodpfx Apohrmk Uomoa max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): straight Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26046.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26046.40 Includes pallet conveying, reference-no: 26046.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Iedohrmlcjpfx Apmsba Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side / längs Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26150X.30 Serial Number blocking unit: 75 Infeed with flying cross (turning device) for bundles Serial Number turning device: DK 5 Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26150X.40 Serial number empty pallet dispenser (pallet terminal): 53 Includes pallet conveying, reference-no: 26150X.50 Conveying for a pallet width of 800 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: used, New: Yes Length: 10 cm Attachment suited for: Agricultural machines Isdpfxezta Sqs Apmeba

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm Ijdpfxswir Dgj Apmjba 120 mm 170 bar 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: used, Diameter: 3.60 m Height: 10.5 m Ibodpfx Aew I R T Nopmja Flat-bottomed Equipped with a hatch on the side wall and top The tanks were used in the chemical industry Four units available.

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Ibedpjhik Ezsfx Apmsa Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Ibedpfsy Dhrpox Apmea 💰 Buy Now for EUR 249000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 26FT-046-01, mileage: 1,850 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 2,660 kg, overall weight: 4,500 kg, tire size: 225/75R16, axle configuration: 4x4, wheelbase: 3,520 mm, fuel tank capacity: 90 l, color: white, gearing type: automatic, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 2, total length: 6,100 mm, total width: 2,100 mm, total height: 3,150 mm, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,740 mm, loading space height: 1,900 mm, Year of construction: 2023, steering wheel position: left, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, sliding door, soot filter, traction control, trailer coupling, truck registration, CUSTOMIZE IT! Base vehicle color is pure white. NEW VEHICLE, first registration 01/05/2026! DOWNGRADED to 3,500 kg gross vehicle weight possible. *WARRANTY EXTENSION to 5 years from first registration optionally available! Door color is IVECO white, no accidents, door color will be adapted to customer requirements. In addition to the extensive standard equipment: SPECIAL EQUIPMENT CHASSIS Standard suspension, front axle ENGINE/TRANSMISSION/AXLES Emission standard EURO VI E Starting strategy Standard Automatic torque converter transmission HI-MATIC 8HP Heated fuel filter Data set Standard Diesel particulate filter Generator 3080 Watts (14 Volt x 220 Ampere) Comfort noise insulation Handbrake control for remote start Fuel Standard Cooler in aluminum Crankcase ventilation heated Engine speed 3500/min Without engine start-stop system Without auxiliary drive Oil pan Standard DESCRIPTION BODY/SUPERSTRUCTURE Rear doors, opening angle 260° Loading lights outside above rear doors Cargo area lights 2 x LED Sliding doors on both sides Partition, omitted SEATING Comfort seat for passenger with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung Comfort seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung ELECTRICS/LIGHTING Trailer socket 12V 13-pin Expansion module + CAN Open High beam control automatic Light and rain sensor Fog lights Preparation for telematics system (telematics box) DRIVER CABIN EXTERIOR Additional vehicle key, with remote control Rear view camera with dynamic lines Warning sounder for reversing, not switchable off DRIVER CABIN INTERIOR/AUDIO Roof storage compartment above windshield Front and head/side/window airbags for driver and passenger with seat belt pretensioners Grab handle on A-pillar Air conditioning manual Steering column adjustable in height and inclination Without rear wall insulation Radio HI-Connect with Bluetooth hands-free system and multi-function steering wheel, compatible with Apple Car Play and Android Auto Cruise control Hot water auxiliary heater Central storage compartment with USB charging port CHASSIS Ibjdpfx Apjztuw Iemja Trailer coupling ball head Differential lock on drive axle(s), switchable Fuel tank 90l integrated Without spare wheel Without spare wheel storage ENGINE/TRANSMISSION/AXLES Exhaust pipe on the left side Eco-Smart function, omitted Rear axle ratio i = 4.444 Homologation incomplete for a complete vehicle (individual inspection required) Air conditioning compressor 170ccm Run-Lock function ADDITIONAL EQUIPMENT ENGINE/TRANSMISSION/AXLES Protection for oil pan COLOR Pure white IC 082 RAL 9010 CONVERSIONS AND MODIFICATIONS ALL-WHEEL DRIVE CONVERSION AX TS DESCRIPTION TS 4x4 DAILY AX 35C-50C All-Road TS 4x4 DAILY AX Additional price HI-MATIC TS 4x4 DAILY AX OFF-ROAD Single base with single tires TS 4x4 DAILY OFF-ROAD Tires TS 4x4 DAILY OFF-ROAD Package Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may contain optional equipment at extra cost! Delivery date by arrangement! Inspection only by appointment! Address is only office address, not vehicle location!

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Max. working thickness: 60 mm Ibodpfx Apozmmuljmoa Number of painting guns: 4

Condition: like new (used), Optimill MT100 in mint condition with various tools and 3-axis digital readout X-axis travel 600 mm Y-axis travel 270 mm Z-axis travel 380 mm Vertical spindle: taper ISO 40 DIN 2080 Vertical spindle milling head rotation range X-Y plane 360° Vertical spindle milling head rotation range Z-X plane 360° Vertical spindle speed range 45 - 1600 min⁻¹ Number of vertical spindle speeds 11 Vertical spindle drawbar M16 Ibedozrlbhopfx Apmsa Vertical spindle drive motor power normal operation 2.2 kW

Condition: excellent (used), mileage: 1,275,885 km, power: 279 kW (379.33 HP), first registration: 07/2004, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 10,300 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking heater, spoiler, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Air-suspended seats - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Axle configuration Tire size: 315/80 R22.5 Front axle 1: Steered; Suspension: Parabolic spring Front axle 2: Steered; Suspension: Parabolic spring Rear axle 1: Twin tires; Suspension: Leaf spring Rear axle 2: Twin tires; Suspension: Leaf spring Weights Unladen weight: 13,980 kg Payload: 22,020 kg Gross vehicle weight: 36,000 kg Condition Technical condition: very good Optical condition: very good Ibjdpfx Ajzrm E Ispmsa Identification Reference number: 17

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Ibsdpfsznwwasx Apmja Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Year of construction: 2001, condition: used, Profile height: max. 150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Ijdszmhqzjpfx Apmjba Pneumatic workpiece clamping Minimum quantity spray device 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW Iodpfjzldw Ijx Apmeba dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (Type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels, each accommodating 3 Euro-pallets side-by-side with a bay width of 2,700 mm). The system consists of 1 starter bay and 7 add-on bays, resulting in a total length of approx. 22 meters. Thanks to the grating decks, the racking is extremely versatile—suitable for general cargo, order-picking stock, or damaged pallets. Included push-through guards and rear mesh panels ensure maximum safety. They provide perfect protection against pallets or loads being pushed through accidentally or falling off. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 (including floor level) Beam type: INP 100 Bay load: 3,000 kg Section load: 14,000 kg Scope of delivery: 09 x Upright frames 6,200 x 1,200 mm (blue) 48 x Pallet rack beams 2,700 mm (red) 24 x Push-through guards 2,700 mm 32 x Rear mesh panels 2,700 x 1,200 mm 48 x Grating decks 1,330 x 1,200 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (DIN EN 15635) Safety is a legal requirement. We conduct the annual expert inspection (in accordance with DGUV Rule 108-007): Iodpfszrlp Sex Apmjba - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Issuance of a legally compliant inspection report and inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm Ibjdpfxexaar Do Apmoa column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, This listing is for Amersham BPG Chromatography Column 100/500 The unit is in full working condition and ready for immediate use. This lab-scale column offers high-performance fluid dynamics and scalable design, making it ideal for robust downstream processing and reliable chromatographic separations in professional laboratory environments. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Isdpfxjzqf Dme Apmeba Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: new, functionality: fully functional, fuel type: gas, fuel tank capacity: 70 l, color: red, empty load weight: 117 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 100 | Hand-Push Crack Sealing Machine for Asphalt Repair & Maintenance The TICAB BPM 100 is a professional hand-push crack sealing machine designed for efficient asphalt crack filling, joint sealing, pothole edge repair, and preventive road maintenance. Engineered for contractors, municipalities, and road maintenance crews, the BPM 100 ensures precise application of hot bitumen, crack sealant, or asphalt mastic, helping extend pavement service life and reduce long-term repair costs. Compact, reliable, and easy to operate, it is the perfect solution for both urban and industrial pavement repair works. Key Features ✔ 70 L tank capacity for bitumen, crack sealant, or asphalt mastic ✔ Efficient heating system (diesel or propane) ensures stable and consistent material temperature ✔ Hand-push design for excellent maneuverability and easy operation in confined areas ✔ Fast heating and ready-to-use performance for quick jobsite deployment ✔ Durable construction for intensive daily use in demanding environments ✔ Compact size ideal for urban maintenance and small repair teams Ideal Applications • Asphalt crack sealing and joint repair • Pothole edge reinforcement • Preventive road maintenance programs • Municipal streets and highways • Parking lots and industrial pavements • Driveways, sidewalks, and bike paths • Small and medium-scale asphalt repair works Built for Professional Road Maintenance Its precise heating and application system ensures high-quality sealing, preventing water penetration and further pavement deterioration. The TICAB BPM 100 is widely used by road contractors and municipal services looking for a reliable and cost-effective solution for asphalt maintenance. Why Choose TICAB BPM 100? • Simple operation with high productivity Iodpex U Atvsfx Apmsba • Reliable heating system for consistent material performance • Compact and mobile design for any jobsite • Reduced maintenance costs and long service life • Professional results for crack sealing and asphalt repair The BPM 100 is the perfect balance between efficiency, mobility, and durability for everyday road maintenance tasks. Request a Quote Today Contact us for pricing, delivery options, and technical specifications. TICAB BPM 100 is available for fast production and worldwide shipping.

Condition: used, Year of construction: 2012, 2012 | Nissan Cabstar France Elevateur Topy 100-1 | Used Truck-Mounted Boom Lift | 80618 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 50 inspection points 49 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The truck drives well, shifts well, good condition, auxiliary frame galvanized no rust. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41123 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Isdpfezl E Dcex Apmoba ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, For sale is a Karl Barth AG "Ventomat" high-performance radial fan, type SE-1-100-4p, single-sided suction, sheet metal housing, painted, motor 5.5kW, 4-pole. Karl Barth AG (Dättlikon ZH) has been manufacturing these fans for over 50 years, and they are a well-known and highly regarded brand in Swiss agriculture, specifically for hay and biomass drying. The fan was used by us for approximately 4 months for ventilation/drying (hay and a drying container) and is in perfect working order. It was newly purchased in December 2025. Included in the scope of supply: - 1x Ventomat SE-1-100-4p fan, 4kW rated power, motor 5.5kW/4-pole, sheet metal painted, single-sided suction - 1x Invertek Optidrive E3 frequency inverter, 5.5kW, IP66/NEMA4X, factory configured, including maintenance switch and mounting base plate - 1x duct cone 222/563 to D400mm - 1x duct reducer D750/D600mm including flange ring D750mm - Additionally included free of charge: 1x flexible fabric hose Ø400mm, 10m length Technical data: Ibodpfx Aezrzizspmea Parameter Value Manufacturer Karl Barth AG, Dättlikon (Switzerland) Type Ventomat SE-1-100-4p Rated power 4 kW Motor 5.5 kW, 4-pole Design sheet metal painted, single-sided suction Frequency inverter Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X FU input 380-480V, 3-phase, 50/60Hz, 17.2A FU output 0-480V, 3-phase, 14.0A, 7.5HP Duct connection 222/563mm to D400mm (cone), additionally D750/D600mm reducer Condition: Barely used (approximately 4 months in operation), technically flawless, fully functional. The new price (December 2025) was CHF 7870.00. Location: 6064 Kerns (self-collection).

Condition: excellent (used), SAPI Büffel 100 blasting cabinet with YASKAWA robot Year of production: 2020 Serial number: 20648 with industrial robot YASKAWA YR-1-06VX-A00, serial number: K18777-473-1 Ibedpfovyh Dlex Apmsa Control: YASKAWA Eras-1000-06VX8-E10 The cell was used for satin finishing of plastic elements.