Used Case Cx36B Zts for sale (7)

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke distance: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm 7Jh8Twbtu Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg

Condition: good (used), Year of construction: 1991, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, Manufacturer: ZTS KOSICE Tip: HP 250 C Table size: 1120 x 805 mm Motor: 22 kW Maximum pressing force: 250 t Zj3Ulqty

Year of construction: 1989, Condition: used, Press brake, bench brake, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. Working width: 2000 mm Ztapnt00 -Max. Sheet thickness: 2 mm - Connected load: 2.2 kW -Dimensions: bench 2850/1100/H1400 mm / aggregate 720/540/H760 mm -Total weight: 2160 kg

Condition: good (used), Year of construction: 1987, ram adjustment: 100 mm, total height: 26,850 mm, table width: 1,000 mm, table length: 720 mm, installation height: 450 mm, stroke adjustment: 120 mm, total width: 12,700 mm, total length: 23,100 mm, overall weight: 10,500 kg, pressing force: 160 t, power: 11 kW (14.96 HP), Eccentric press LE 160 C. Year prod. 1987(ZTS - SLOVAKIA). Parameters: Max. pressure 160ton. Stroke 20-120mm. Number of jumps in single movement 30/min. Number of jumps in continuous movement 50/min. Adjustment of the slider 100mm. Maximum distance of the slider from the table 450mm. Overhang 340mm. Slide attachment surface 750 x 380mm. Clamping area of the table 1000 x 720mm. Dpbkvf Mounting hole in the slider fi 50mm. Working pressure of air 0,4 - 0,6 MPa. Motor power 11kW. Overall dimensions (Height x Length x Width) 2685 x 2310 x 1270mm. Weight 10500kg. Technical condition of the machine good. It is possible to make a visual inspection and check the machine in motion.

Condition: excellent (used), Year of construction: 1980, Functionality: fully functional, machine/vehicle number: 230357, total height: 29,750 mm, table width: 1,120 mm, table length: 800 mm, stroke adjustment: 110 mm, total width: 13,500 mm, total length: 25,800 mm, overall weight: 13,000 kg, pressing force: 250 t, Machine has been completely overhauled for sale by our service technicians - All the plain bearings has been renewed and hand scraped for the proper clearance - All the rolling bearings renewed - All the critical parts has been inspected for cracks and damages - Slideways reconditioned by hand scraping 2Jvnnx7 - Clutch/brake reconditioned - Central lubrication renewed - Main motor serviced - Machine control and electrics renewed with PLC based control - Main motor equipped with inverter drive - Safety valve renewed - New paint coat - Etc.

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke distance: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Dqnxux Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg

Condition: good (used), Year of construction: 1988, Functionality: fully functional, total height: 29,750 mm, table width: 1,120 mm, table length: 800 mm, stroke adjustment: 140 mm, total width: 13,500 mm, total length: 25,800 mm, overall weight: 12,800 kg, pressing force: 250 t, height adjustment type: mechanical, Equipment: documentation/manual, Eccentric press LE 250C. Year prod. 1988(ZTS - SLOVAKIA). Max. pressure 250ton. Stroke 30-140mm. Max. number of strokes per minute 45. Adjustment of the slider 110mm. Maximum distance of the slider from the table 450mm. Clamping area of the slider 800 x 475mm. Mounting area of the table 1120 x 800mm. Motor power 20kW. Hhyti2Fft Overall dimensions (Height x Width x Length) 2975 x 1350 x 2580mm. Weight 12800kg.