Used Hurlimann 909 Xt for sale (27,837)

Condition: used, Field of application: Construction Empty weight: 649 kg Make of engine: Electrical Compressor type: Screw compressors Delrhjr Idbyj Hv Nekl Working pressure: 5 - 12 bar Please contact Sales Department for more information

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Dkolrh Hsug Edkjv Nel Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Year of construction: 2018, operating hours: 200 h, Condition: good (used), STANDARD STAINLESS STEEL MACHINE, MACHINE BLOCK WITH DOUBLE STAINLESS STEEL MIXING BOWL LID. 10 KG AND STAINLESS STEEL EXTRUDER PREPARED FOR COOLING WITH RUNNING WATER, COMPLETE WITH DOUBLE SHEET RAVIOLI MACHINE N. 1 DRAWER FOR PASTRY MM. 120, AUTOMATIC BREAD ROLLER, MOULD FOR DOUBLE SHEET RAVIOLI, AUTOMATIC PASTA CUTTER WITH VARIABLE SPEED WITH ONE BLADE, FAN FOR PRE-DRYING PASTA, N. 1 STAINLESS STEEL SUPPORT, N. 2 PERFORATED BASKETS, N. 1 CONTAINER-FUNNEL FILLING, WITH PLC & TOUCH SCREEN – CILLER COOLING € 23,300.00 D EXTRA RAVIOLI Double leaf ravioli mold completely filled with dispenser € 1,350.00 each. Spicy pastry ADJUSTABLE Puff pastry cutting mold with adjustable thickness 10 different standard dies in bronze € 288.00 each Special punch complete with knife € 770.00 each 20 pcs WHITE Perforated trays made of food-grade plastic € 10 each Container filled with stainless steel € 236.00 each Additional rolling pin made of food-grade plastic 4 pcs € 33.00 each Connection to the company management program via WiFi with integrated modem € 5,800.00 I would like to have between € 20,000-22,000 for it! It is now 2 years old! It is in very good condition! Dkslrh Hvevvrycj Nsl

Year of construction: 2008, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: TEEWINDER 1S-6NC-600D-2400L, This machine was originally built in 2008 and remained in packaging until it was recently acquired by us.We have reassembled the machine and tested it with the help of the original builder to ensure it still works as designed. Djlrh Hvetq Ewaj Njkl - The machine has 6 axes of movement and can be used for winding tees with pipe diameters up to 600 mm. - The machine is in very good condition and is equipped with a safety fence to close off the work area. New price of this machine was more than €400,000.

Condition: used, mileage: 113,000 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 12/2016, emission class: euro6, color: white, number of seats: 6, Equipment: ABS, air conditioning, central locking, Servo, radio remote control, electric windows, radio, 6th seater with partition wall and wooden floor, 1st hand, checkbook, very clean, nationwide delivery 295 EUR + VAT, trailer incl. mounting 590 EUR + VAT, warranty and test drive possible. Opening hours: Mon-Thu 8.00-12.00 and 13.00-17.30, Fridays from 8.00-12.30 and 14.00-17.00, Saturdays from 9.00-11.30 No: 351 Dkoletrpwwsrh Hv Nsl Further vehicles:

Condition: used, Year of construction: 2018, operating hours: 1,929 h, fuel type: gas, mast type: duplex, Field of application: Internal logistics Lifting capacity: 3.000 kg Dslrhot Auwyo Hv Nskl Lift height: 360 cm Please contact Sales Office for more information

Condition: used, axle configuration: 3 axles, first registration: 02/2004, color: other, Year of construction: 2004, Rear axle 1: Lift axle Extendable body: Yes Please contact Bastien Begemann or Corné Visser for more information. Djlsutuzasrh Hv Nekl

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg Dkolrhon Utt Hs Hv Nol This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: used, axle configuration: > 3 axles, loading space length: 9,000 mm, loading space width: 2,540 mm, loading space height: 850 mm, first registration: 02/2014, suspension: air, color: red, tire size: 245/70R17.5, Year of construction: 2014, 4 Axle semi trailer. 2 x friction steered / caster 630 cm extendable. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Double tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 2: Double tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Center axle: Double tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 3: Double tires; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Weights Unladen weight: 11,900 kg Payload: 36,100 kg GVW: 48,000 kg Identification Type number: 4 AXLE LOWLOADER / EXTENDABLE = Company information = Deljvc Akrerh Hv Nokl ALL PRICES ARE NET FOR EXPORT,Joris Versteijnen NL-DE-GB)Wouter Greutink NL-DE-GB-ES-IT)Govorim po ryccki We make every effort to provide correct information, nor can any rights be derived from the texts posted.

Condition: good (used), Year of construction: 2022, lifting capacity: 36,000 kg, machine/vehicle number: 2696, Seacom SEACOM SH36XT from Uniktruck Dkoljqxc Tvsrh Hv Nol

Year of construction: 2024, Condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo Dkjloiq Hxkerh Hv Njl a readjustment of the lo stop is necessary.

Condition: used, Year of construction: 2017, operating hours: 9,333 h, fuel type: gas, mast type: triplex, Field of application: Internal logistics Lifting capacity: 2.500 kg Lift height: 430 cm Please contact Sales Office for more information Dslrh Hstzyrgov Nekl

Condition: good (used), mileage: 26,000 km, power: 129 kW (175.39 HP), first registration: 01/1994, fuel type: diesel, color: blue, axle configuration: 4x4, gearing type: mechanical, Equipment: all wheel drive, differential lock, parking heater, trailer coupling, * 4x4, * All-wheel drive can be switched on with a coaster, * Differential locks, * Wheelbase 3.60 m, * Personnel vehicle, * Box body with roller shutters, * Walkable roof, * 5 gears, * Trailer coupling with air connections, * Auxiliary heating, * New batteries, * Repairs costing €2,200 carried out by a Mercedes specialist company. * 1st hand, * Untampered with, * Only owner and used by the THW, * Reduction in total weight to 7.5 t, * Chassis originally 9.5 t, * 9 seats registered, * Very low driving noise due to soundproof tilting driver's cab. * Runs perfectly, tightly, true to its course, without load play or vibrations. * HU + H-license plate possible by arrangement. There may be labels on the vehicles. Mileage according to speedometer Vehicle is preferably sold to businesses or export, Private subject to reservation Sale without guarantee Net price for export Net: 18,400 EURO + (19% VAT) 3,496 EURO = Gross: 21,896 EURO The above information is non-binding, errors/changes and prior sale subject to reservation! Dkjlrhoq T Sv Ns Hv Njl

Condition: new, table length 1500 mm table width 1500 mm Dslrhjmhm Axs Hv Njkl table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport.

Condition: used, Year of construction: 2013, operating hours: 243 h, drive type: Elektro, tractive force with load: 4,000 N, Tractor Condition: Ready for use and fully functional Technical condition: very good Front tires type: solid rubber Rear tires type: Solid rubber Dkjlrh Hvsu D Rxds Njl Battery Volt: 24V Battery Ah: 620Ah Battery manufacturer: overhauled and tested Battery type: PzS Battery year of manufacture: 2020 Description: Fully operational, serviced and checked according to FEM 4.004 (UVV). // Good working condition, serviced and checked

Condition: good (used), Year of construction: 2022, lifting capacity: 36,000 kg, machine/vehicle number: 2695, Seacom SEACOM SH36XT from Uniktruck Dslsqxc Trorh Hv Njkl

Year of construction: 2005, Condition: good (used), Demag Injection Moulding Machine Type: 200/580-840 Extra with robot Control: NC 4 Year: 2005 Clamping unit Clamping force t: Dolrh Holpad Sjv Nokl 200 Opening stroke mm: 575 Distance between tie bars mm: 580x580 Installation height min/max mm: 340/690 Mould fixing platen size h x v: 860x860 Injection unit Screw size mm: 50 Injection shot weight in Polysterol gr: 400 Injection volume cm³: 442 Injection pressure increased bar: 1946 Size and weight Dimension HxWxD m: 5.4x1.7x2.1 Total weight Kg: 8200 Additional information Robot Kerzüge 1

Condition: used, Year of construction: 2017, operating hours: 7,805 h, fuel type: gas, mast type: triplex, Field of application: Internal logistics Lifting capacity: 2.500 kg Lift height: 490 cm Please contact Sales Office for more information Dkelrhjt Auwte Hv Njl

Condition: good (used), mileage: 26,000 km, power: 129 kW (175.39 HP), first registration: 01/1994, fuel type: diesel, color: blue, axle configuration: 4x4, gearing type: mechanical, Equipment: all wheel drive, differential lock, parking heater, trailer coupling, * 4x4, * All-wheel drive can be switched on with a coaster, * Differential locks, * Wheelbase 3.60 m, * Personnel vehicle, * Box body with roller shutters, * Walkable roof, * 5 gears, * Trailer coupling with air connections, * Auxiliary heating, * New batteries, * Repairs costing €2,200 carried out by a Mercedes specialist company. * 1st hand, * Untampered with, * Only owner and used by the THW, * Reduction in total weight to 7.5 t, * Chassis originally 9.5 t, * 9 seats registered, * Very low driving noise due to soundproof tilting driver's cab. * Runs perfectly, tightly, true to its course, without load play or vibrations. * HU + H-license plate possible by arrangement. There may be labels on the vehicles. Mileage according to speedometer Vehicle is preferably sold to businesses or export, Private subject to reservation Sale without guarantee Net price for export Net: 18,400 EURO + (19% VAT) 3,496 EURO = Gross: 21,896 EURO The above information is non-binding, errors/changes and prior sale subject to reservation! Delrh Hvjq T Swuo Njkl

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Dksled Raw Asrh Hv Njl Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport.

Year of construction: 2013, Condition: excellent (used), Band dryer brand New eco tec Djlrhehfamls Hv Nskl Sell dryer with air washer. The dryer has been used very little because of lack of heat on the methanization. New air washer, never used.

Condition: good (used), Year of construction: 2022, lifting capacity: 36,000 kg, machine/vehicle number: 2694, Seacom SEACOM SH36XT from Uniktruck Dolrheqxc Tns Hv Nekl

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 6,490 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, TECHNICAL DETAILS Load capacity: 3000 kg Load center of gravity: 500 Lifting height: 4900 mm Free lift: 1680 mm Length: 2700 mm Overall width: 1200 mm Dkolrjtwpmgeh Hv Nsl Overall height: 2350 mm Dead weight: 5170 kg Mast type: Triplex Fork length: 2400 mm Front tires type: Superelastic Front tires size: 28x9-15 non-marking Rear tires Type: Superelastic Rear tires Size: 6.50-10 non-marking

Condition: new, table length 4000 mm table width 2000 mm table height 850 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Delrh Hekucupov Njkl Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Dolrh Hjd Raw Djv Nskl Including basic equipment. Accessories shown are optional. Price plus packaging and transport.