Used Hurlimann 909 Xt for sale (27,837)

Condition: as good as new (ex-display), One Electrostatic paint spray gun for high pressure with control unit Additionally with spare gun, spare air hose, spare control hose The pressure regulator is missing from the control unit, but can be ordered separately if required. Dkelrsnl D S Tsbzaxel

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Dolrbzoqx Sz Djaxokl

Year of construction: 2010, Condition: good (used), Hobart commercial dishwasher for undercounter installation with dosing pump for detergent and rinse aid Dkjlrbzoc Utiqeaxel Completely made of stainless steel Just call if you have any questions thanks a lot Call me to discuss further

Condition: used, Year of construction: 2023, Net binding Drawbar eye fix 40mm Control unit E-LinkPro ISObus Filling indicator / PickUp feeler wheels Overrunning joint Running axle 17 Blind blade with holder 540 rpm / gearbox Additional net reel holder Extendable bale ejector / Dkelrbzaotlq Haoxjl

Condition: new, Year of construction: 2023, minimax twf 55es Sturdy cast steel construction Anodized aluminium sliding table Large cast iron milling unit, swivels backwards up to -45° Four milling speeds from 3500 to 10000 min¯¹ Right/left rotation as standard Height and inclination display accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for lasting precision Powerful 5.0 kW industrial motor Arched milling hood included in the scope of delivery TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Width/depth (product) approx. 1400mm Weight (net) approx. 510kg Suction connection Suction nozzle diameter 2 x 120mm Work table Work table length 1200mm Worktable width 530mm Table height 900mm Sliding carriage length 1200mm Sliding carriage width 360mm Sliding carriage height 142mm Installation information Space requirement Length 2800mm Width/Depth 2120mm Explanation of space requirement The dimensions take into account maximum maximum travel distances or effective lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the specified dimensions to the required space, to obtain the recommended free installation area for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Drive motor power Milling spindle 5.0 kW Spindle inclination 0 to -45° Effective length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed display LED on the front of the machine Spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm Tool diameter max. lowerable 230mm Tool diameter max. profile milling240mm Tool diameter max. tenoning320mm Dkjlropdp Ncjbzaxel

Condition: used, Year of construction: 2008, Year of manufacture 12/2008 Battery 03/2019 BH 253.5 Payload 1t Dslrsqgchtebzaxekl Lifting height 6,875mm Own weight 5,799kg (without battery) Battery voltage 48V Height 3,900 mm Driving speed of up to 14 km/h MPSA 300 - personal protection system

Condition: good (used), Herbert Potato Box Tippler, with belt transfer conveyor Delst Sxmwjrbzaxekl

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t Dkolrbsfg E Hpszaxsl dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: like new (used), Year of construction: 2022, operating hours: 92 h, Functionality: fully functional, machine/vehicle number: 13322, Edge grinding machine for straight edges model MUSAnext for processing natural stone Grinding and polishing of straight edges with upper and lower chamfers, Calibration and regrinding of workpiece surfaces, Milling of water grooves and grooves on the face, Milling of half or quarter round bar profiles Torsion-resistant steel frame as a monoblock for installation on a stable hall floor Sandblasted machine frame, cathodically galvanized, primed with epoxy zinc paint and painted with polyacrylic paint Electrical control cabinet integrated into the machine frame Machine components painted using the cataphoresis process for optimum corrosion protection Stainless steel splash guards Service water drip tray with side drains Automatic central grease lubrication 2 water valves for automatically controlled water supply for end faces and bevel grinding supports Conveyor belt with wedge for precise longitudinal guidance, width 600 mm Conveyor belt support on the machine frame made of stainless steel Adjustable conveyor belt speed 0 - 250 cm/min on the operator panel Dynamic conveyor belt speed for increased feed rate when feeding in and out workpieces Flushing device for inside and outside of conveyor belt Workpiece stop roller bar at the belt infeed for precise alignment of the workpieces Belt running direction from left to right Table working height 780 mm Table extension console can be swiveled manually, rollers offset in two rows arranged with additional extension of 1.5 meters Pneumatically height-adjustable workpiece pressure rollers, which enable processing of Dkolrbzajtzp T Hoxjl different workpiece thicknesses without additional manual adjustments Operator panel with 8" touchscreen Programming of switch-on and switch-off times for each support Programmable machining length of end faces and chamfers Workpiece length measurement with automatic spiral step system Magnetic sensor for detecting the workpiece thickness, for automatic positioning of each support with automatic height adjustment MAT sensor for cross reinforcements, automatically detects the height and number of cross reinforcements and controls the pneumatic pressure cylinders

Condition: used, Year of construction: 2023, 540 rpmGearbox Net binding Additional net roll holder Extendable / bale ejector Wheel chocks Press roller bearings (relubricated) Fixed drawbar eye 40mm / control unit E-LinkPro ISObus PickUp2.25 m Var. roller downholder / PickUpTast wheels fixed 17 Djlrbzst Dxp Aoaxokl

Condition: new, Description: - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3,500 to 10,000 min-¹ - Milling spindle with right/left rotation - Large milling unit made of gray cast iron, attached directly to the table - With extraction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5.0 kW - Arc milling protection hood as standard - Made in Italy quality Equipment details: Cast iron milling unit: - Attached directly to the milling table - Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life - 3 milling speeds from 3,500 to 10,000 min-¹ Powerful motors: - Equipped with a powerful three-phase motor Milling guard: - The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety Milling fence: - Precise milling fence with a quick adjustment and fine adjustment with scale on the fence jaw - The integrated suction connection ensures a clear view Milling table opening: - A large router table opening also allows the use of larger flush cutters and tenoning and slotting tools above and below the table Djlrou Diymsbzaxskl Arc milling protection hood: - Included as standard Reversible fence jaws: - Versatile integrable fence for bridging the tool gap - Enables safe working even with narrow workpieces Technical data: Electrical connection: 400V/50Hz Motor power S6-40%: 5.0kW Spindle speeds: 3,500/7,000/10,000 min-¹ Work table dimensions: approx.L1,945xW550xH900mm Max. Spindle projection over table: 130mm Effective length of the spindle: 100mm Spindle arbor Ø: 30mm Max. Tool diameter can be lowered: 180mm Max. Tool diameter for profile milling: 210mm Suction nozzle Ø: 2x120mm Weight: approx. 240kg Scope of delivery: 1 x arc milling protection hood 1 x aluminum stop jaws 1 x table extension left 1 x table extension right 1 x Extendable workpiece support

Condition: ready for operation (used), Important information for us would be the following: Rollers in exchange? We can offer our rollers at a lower price if we can take the old roller cores in the exchange and reuse them. Material? What kind of coating should it be? Soft or hard PU? Soft PU: Soft PU can be used for medium grammages and smooth papers. For folders with working widths from 70cm, Soft-PU is clearly recommended in the first folding unit, due to its easy handling. Hard PU: The "all-rounder", is more suitable than Soft-PU coating, especially for thin papers. Due to the closed surface of the hard PU, you can clean it without problems even if it is dirty. Hard-PU can be used for all grammages and papers. Size of the rollers? Here we need the common size of the roller. We are happy to offer you our rollers combined with a technician insert. In order to be able to calculate the offer as accurately as possible, we need the location of use. Make a roller request Important information for us would be the following: Rollers in exchange? We can offer our rollers more cheaply if we can take the old roller cores with us and reuse them when exchanging them. Material? What kind of coating would you like? Soft or hard PU? Soft PU: Soft-PU can be used for medium grammage and smooth paper. For folding units with working widths from 70cm, Soft-PU is clearly recommended in the first folding unit due to its easy handling. Hard PU: The "all-rounder" is more suitable than the soft PU coating, especially for thin papers. Thanks to the closed surface of the hard PU, you can easily clean it even if it is dirty. Hard PU can be used for all grammages and papers. size of the rollers? Here we need the usual size of the roller. Dslenkdyqjrbzaxskl We would be happy to offer you our rollers combined with a technician assignment. In order to be able to calculate the offer as precisely as possible, we need the location. make an inquiry

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 90°C Max. external volume: 50 ltr at 90°C max. Flow rate 54 l/min  max. Delivery pressure 6.0 bar Dimension L x W x H 639 x 266 x 562 mm  Weight approx. 50 kg *HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / Industry 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - More powerful pump, hydraulic parts made of VA, magnetically coupled Dkelrbsftm Eijzaxjl - Mould draining by suction - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only complied with if specified in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, overall weight: 35 kg, empty load weight: 6 kg, maximum load weight: 28 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, machine/vehicle number: 068983c41e44eb5660fa9100c, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires Dkelrboi Riwujzaxel 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Condition: good (used), Year of construction: 1991, Control Fanuc O-T Dkjlrbelmlwdjzaxel Turning diameter max. 180 mm max. turning diameter over slide 120 mm spindle bore 26 mm speed 6000 rpm rapid traverse 10 m/min X-axis 200 mm Z-axis 180 mm Space requirement L x W x H 1,3 x 1,6 x 2,2 m Weight 1500 kg

Condition: used, Year of construction: 2023, Control unit E-LinkPro ISObus 13 Blind blade with holder Running axle 540 rpm / gearbox Additional net roller holder Wheel chocks Press roller bearing / (regreasable) Fixed drawbar eye 40 mm / Dkolrbzaetlqxqsxol

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: F4769, HEBROCK F4 next Edge banding machine Exhibition machine Order no.: F4769, year 2024 Item number: JA_G241203 Description: Max. Max. Joint thickness 2mm Max. Edge thickness 3 mm Workpiece thickness 8 - 50 mm Min. workpiece width 80 mm Min. workpiece length 180 mm Feed rate approx. 10 m/min Ready for operation approx. 3.5 min. Interchangeable glue tray Yes PUR Yes Radius cutter R2 Radius scraper R2 / R1 Surface scraper Yes Corner rounding Yes Buffing ---- Power 400V / 50 Hz 7.4 kW Suction nozzle 140 mm Dimensions (LWH) 4050 x 1450 x 1500 mm Weight approx. 840 kg Subject to errors and changes in technical characteristics. Note: New machine: - Prices are collection prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) - Subject to prior sale! - You will receive an invoice with VAT shown. - The buyer is free to inspect the items on site. - Our general terms and conditions apply. - Special agreements are only possible by written agreement. - Any items in the background of the picture are not included in the scope of delivery. - Saw blades are for illustration purposes only and are not included in the scope of delivery. Shipping options: - We will be happy to make you a transportation offer. - Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. Dkelrsvc Ddgsbzaxjl (Assembly and instruction of the goods for demonstration purposes is optionally possible by arrangement). - Optionally, our trained service personnel can set up the machine at your premises and give you a short briefing. Travel, travel and service times at an extra charge.

Year of construction: 2021, Condition: excellent (used), We offer a countertop autoclave in very good condition. Dkjlreumth Sjbzaxsl Autoclave Prestige Medical 12L, sterilization temp 121 stC Year of production: 2021 Brand: PrestigeMedical Model: Classic Extended Media Personal collection from Gadansk (Poland, Poland)

Condition: used, mileage: 43,358 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 06/2023, emission class: euro6, color: black, number of seats: 8, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number: A11700 ---- E07 Hill start assist * E6M MBUX Multimedia System Mid * LG2 LED Intelligent Light System * VQ1 AVANTGARDE * E1D Digital radio (DAB) * E1E Navigation * EZ6 Parking package with 360 camera * JS1 360 camera * T55 Electric operation for right-hand sliding door * T56 Electric operation for sliding door left Dkolrjt Iqqgjbzaxjl * Z3N Night package * BA3 Active Brake Assist * BH1 HOLD function * C70 Pedestrian protection * C74 Illuminated Mercedes-Benz entrance lettering * CA4 AIRMATIC * CL1 Steering wheel adjustable for tilt and height * CL3 Leather steering wheel * CL4 Multifunction steering wheel with trip computer * CM2 Bumpers and add-on parts painted in body color * D12 Roof rails * E1F Display diagonal 26 cm (10.25?) * E1T Touchpad * E34 Buffer battery for starting process * E57 Electrical system for trailer socket * E70 Lower control panel switch position * E7B Navigation pre-installation * ED4 Non-woven battery 12 V 92 Ah * EL9 2-way loudspeakers front and rear * ES2 12 V socket in trunk / load compartment * EX9 3 years free map data updates * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F3S Exterior mirrors painted black * F65 Exterior mirrors, automatic folding * F66 Lockable glove compartment * F69 Exterior door lock * F72 Exterior and interior mirrors, automatic dimming * FC1 Electronic key in chrome look * FF1 Center console with storage compartment * FH9 Ebony wood-effect trim elements, dark anthracite * FK4 Radiator grille painted black * FP3 Mirror package * FS5 Illuminated mirrors for sun visors * FZ5 Burglar and anti-theft alarm system * FZ8 Comfort opening and closing with IR remote control * G43 9G-TRONIC * H00 Warm air duct to passenger compartment * H12 Auxiliary hot water heater * H20 Heat-insulating glass all round * HH4 THERMOTRONIC automatic climate control system * HZ0 Electric auxiliary heater * HZ7 Semi-automatic air conditioning, TEMPMATIC in the rear * IL6 Metallic paint * J55 Seat belt warning system for front passenger seat * JA1 Warning lamp for wiper fluid level * JA7 Blind Spot Assist * JA9 Traffic sign assistant * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK5 Instrument cluster with color display * JP1 PRE-SAFE * JP2 Driving assistance package * JW5 Lane Keeping Assist * JW8 ATTENTION ASSIST * KB5 Main tank 70 liters * LA2 Driving light assistant * LC1 Ambient lighting * LC4 Comfort roof control unit * LC5 Ambient lighting in the exterior mirrors * LC6 Bel. in rear grab handle with reading spotlight * LC7 Lighting for front footwell * LC8 Tailgate ambient lighting * LE1 Adaptive brake light * LG4 LED tail lights, brake lights and indicators * LP4 Brand logo projection * MJ8 ECO start-stop function * MO6 Emission class Euro 6d M/N1 GR. II * MS1 TEMPOMAT * MX0 BlueEFFICIENCY package * R1O Light-alloy wheels 7.5Jx18, 5-double-spoke design * RM4 Comfort tires * RY2 Tire pressure monitoring on VA and HA, wireless * SA6 Passenger airbag * SA8 Seat comfort package * SB1 Comfort driver's seat * SB2 Comfort front passenger seat * SE4 Lumbar support front passenger seat * SE5 Lumbar support driver's seat * SH1 Thorax-Pelvis-Sidebag Driver * SH2 Thorax-Pelvis-Sidebag front passenger * SH9 Windowbags for driver and front passenger * T14 Active hold-open device for sliding door * T19 Sliding door left * T70 Child safety lock on doors in passenger compartment * T74 Grab handle for entry * U73 Armrests for s

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, Scrap conveyor was installed on a Laser Next 1530 built in 2019, but was only used sporadically and was eventually dismantled. Dkjlrevcpi Ijbzaxel All parts on the belts are the complete attachments to the machine. Prima Power Art. No. D5.57H Steel conveyor belt for automatic turntable. Conveyor length to start of high conveyor: approx. 292 cm, high conveyor length approx. 160 cm. Total length approx. 452 cm. Conveyor height approx. 140 cm. Extension approx. 366 cm. Conveyor belt width approx. 67 cm. Conveyor width approx. 94 cm. Sale ex works without guarantee and return.

Condition: like new (used), Functionality: fully functional, total length: 400 mm, Suitable with: KRC2 KR210 series and KR150 series Length: 40 cm (makes KR210 a KR210 L150) Condition: Refurbished and repainted to KUKA's orange Deljq Hd Sdjrbzaxokl

Condition: ready for operation (used), Year of construction: 2007, operating hours: 26,102 h, Functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 510 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Dkelrbzast Suzdsxol MAXXTURN 65 - versatile options for the complete machining of bar parts thanks to the powerful main spindle, which enables shaft machining with the tailstock TECHNICAL DETAILS Turning diameter: 320 mm Center distance: 510 mm bar capacity: 65 mm Travel X / Y / Z: 260 / 80 / 610 mm Control system: Siemens 840 collet chuck HS / GS: Röhm Steady rest: not available Tailstock: present Chip conveyor: present Bar feeder: LNS Quick Load Servo III, bar length 1 m Belt filter: not available

Year of construction: 2006, Condition: excellent (used), Injection moulding machine Demag Extra 160-600 Year of manufacture 2006 Clamping force 1600 kN Tool opening stroke 500mm Minimum mould height 275mm Maximum mould height 585mm Maximum distance between plates 1085mm Size of clamping plates 770 x 770mm Spacing between columns 520 x 520mm Maximum tool weight 2200kg Ejector stroke 160mm Ejector force 59kN Auger diameter 45mm L/D 20 Specific injection pressure 1910 bar Injection volume 323 ccm Injection mass (PS) 291g Heater power 11.3 kW Dkelrbzajpiqhrjxol Pump motor power 22kW Oil tank capacity 220l Machine weight 6400 kg Dimensions (L x W x H) 5.3 x 1.5 x 2.0 m

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, Functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of construction 2022 only 3 operating hours incl. wheel set only self-collection possible Dkjlju D Abwjrbzaxjl 4.750.-€ excl. tax 5.700.-€ incl. VAT Continuous output power (active power) 5.4kW at 230Volt / 8.0kW at 400Volt Socket version 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1x 400 V, 16 A Soundproofed diesel engine (complies with noise and exhaust emission regulations) Connections ergonomically located at the front in a control panel with voltmeter and operating hours counter Splash and impact protection thanks to full cladding Electronic voltage regulation AVR Magnetic thermal circuit breaker protects against overload and short circuits caused by faulty consumers or cables Safe personal protection thanks to insulation monitoring (appliance does not need to be earthed) Low oil shutdown Long running times thanks to 24 l large tank High level of convenience thanks to E-Start Water-cooled motor Made in Europe quality

Condition: used, total length: 500 mm, The price is for 1 piece of ROBOT EXTENDER Code: KRC2 360-500 ROBOT EXTENDER Delrbjmrqwyszaxekl Length: 25 cm & 50 cm Brand: KUKA Condition: USED