Used Hurlimann H-488T for sale (24,079)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Dobovwlqqs Hdiu Dsut Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Vacuum Truck | 204214 kms 📍Location: France, Boulazac Isle Manoire 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 89600 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "31334 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Deb Hdiewhtc Usu Dout ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: new, Year of construction: 2022, Band saw Year of manufacture 2022 Work table 1000 x 720 mm Work table height 980 mm working table inclination 0-20 Motor 3,0 kW Cutting height max. 450 mm Cutting width max. 720 mm Saw wheel diameter 740 mm Dueb Hdijmxp I Aeu Dot saw band speed 1540 m/min saw band length 5340-5420 mm Precision guide top and bottom Suction nozzle diameter 2 x 120 mm L X W X H 1180 x 820 x 2430 mm Weight approx. 5610 kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Djb Hswhk Dvjdiu Dout

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Debeu R Szyj Hdiu Djut Dust class M: AWN 16 - new exhibition machine -

Condition: used, Year of construction: 1992, Hydraulic Guillotine Shear Manufacturer: RAS Type 86.40 4040x5mm Year of Manufacture: 1992 Technical Specifications Deb Hswhv Hijdiu Djut Manufacturer: RAS Type: 86.40 Year of Manufacture: 1992 Usable Length: 4040 mm Sheet Thickness: 5.0 mm 20 Hold-Down Clamps Dimensions: L 4.7 x W 2.20 (plus 1.2 m support arms) x H 1.75 m Weight: 7.7 t Equipment • Angle Stop • Support Arms • Pneumatic Sheet Holding Device with Tilting Roller Table Height Adjustment • Motorized Cutting Gap Adjustment • Multicut-Eco 2000 Control System • Original Scrap Cart • Small Parts Diverter to the Front • Documentation All information is provided without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Dusb Hovn Tg Ijdiu Djt Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Functionality: fully functional, machine/vehicle number: 611878000365, Year of construction: 2007, load capacity: 1,200 kg, lifting height: 5,870 mm, fuel type: electric, battery voltage: 48 V, Included in delivery: 1x Reach Truck Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Rated load capacity: 1,200 kg Rated drive power: 6.0 kW Maximum battery weight: 788 kg Battery voltage: 48 V Year of manufacture: 03/2007 Serial number: 611878000365 Maximum lifting height: approx. 5,870 mm Operating hours: 0.0 h Overall width: Tines (outer) approx. 800 mm Tine length: approx. 800 mm Battery age: 02/2022 Extendable depth: up to 630 mm Overall height: approx. 2,460 mm Overall width: approx. 1,250 mm Overall depth: approx. 1,700 mm Total depth with tines retracted: approx. 1,900 mm Total depth with tines extended: approx. 2,520 mm Battery charger, used Manufacturer: Richter Forklift Trucks Model name: SE48V80A Total width: approx. 500 mm Total depth: approx. 400 mm Total height: approx. 810 mm Deb Hdiuewhdrgj Deut Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 42 - 2000 U/min spindle head DIN 55022 Gr. 5 feed range 0,019 - 0,912 mm/U thread - mm pitch 0,25 - 12 mm tailstock quill stroke 90 mm tailstock taper MT 3 dia. of leadscrew 24 mm total power requirement 3 kW weight of the machine ca. 0,7 t Duob Hdiewiilhsu Det dimensions of machine L x W x H 1,48 x 0,69 x 1,46 m Accessories: DRO on 3 axis, 3-jaw chuck 160 mmø, MULTIFIX-head A, collet fixture with various collets, running steady

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Deb Hdiuswhkywo Dout

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives Dsb Hdeu R Sxxoiu Deut - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, worktable length: 6,400 mm, worktable width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 Dujbowhk E He Hdiu Det DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, Functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Duobju Thgze Hdiu Dot Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Functionality: fully functional, machine/vehicle number: 611878000050, Year of construction: 2004, operating hours: 10,478 h, load capacity: 1,200 kg, lifting height: 5,770 mm, fuel type: electric, battery voltage: 48 V, The scope of delivery includes: 1x Reach Truck Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Rated load capacity: 1,200 kg Rated drive power: N/A Maximum battery weight: 788 kg Battery voltage: 48 V Year of manufacture: 02/2004 Serial number: 611878000050 Maximum lifting height: approx. 5,770 mm Operating hours: 10,478.3 h Overall width: Tines (outer) approx. 850 mm Tine length: approx. 800 mm Battery age: 2012 Djbowhb Sks Hdiu Deut Extendable depth: up to 630 mm Overall height: approx. 2,460 mm Overall width: approx. 1,250 mm Overall depth: approx. 1,700 mm Total depth with tines retracted: approx. 1,900 mm Total depth with tines extended: approx. 2,520 mm Battery charger, used Manufacturer: STILL Model name: ecotron memory 48V-70A Total width: approx. 550 mm Total depth: approx. 450 mm Total height: approx. 500 mm Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1998, cutting diameter 10 - 400 mm saw band length 5090 mm cutting width 1,1 mm cutting range - flat - 400 x 320 mm feed length 590 mm feed length: multiple 9.999 mm cutting speed 17 - 90 m/min clamping capacity 20 - 60 bar Dusb Hdiev Achqou Dst control compact control sawing motor 2,2 kW dimensions of saw-band 5090 x 34 x 1,1 mm total power requirement 5,0 kW weight of the machine ca. 1,75 t dimensions of machine L x W x H 2,45 x 2,55 x 1,37 m Accessories: chip conveyor, coolant

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Deb Hdowhkraeiu Dout

Condition: excellent (used), HOLZHER Evolution 7405 machining center -used- Processing in throughfeed, 4-sided milling possible, automatic suction cup positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, saw unit for grooving in X direction, pick-up tool changer, manual central lubrication ----- Technical data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: Campus/Hops, Main spindle motor power: 6.5 kW, Main spindle mount: HSK 63F, Drill unit motor power: 1.7 kW, Drill spindle mount: M10 fit 11mm, Dobsu R S Its Hdiu Dsut Number of vertical drill spindles: 9 pieces, Number of horizontal double drill spindles in X direction: 2 pieces, Number of horizontal double drill spindles in Y direction: 1 piece, Saw blade Ø of saw unit: 125 mm, Number of tools in the changer: 6 pieces, Extraction connection Ø: 2 x 120 / 1 x 140 mm, Required volume flow: 4,100 m³/h, Required static. Negative pressure: 2,500 Pa, required air speed: 30 m/s, compressed air connection: 6 - 8 bar, compressed air requirement: 300 l/min., dimensions (LxWxH): 3,680 x 1,930 x 2,340 mm Quality information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), Year of construction: 2018, 4 used route trolleys Manufactured by Still Type Liftrunner Dsb Hdijuyi Ageu Djut Year 2018 Serial numbers 550516 j 00013,00014,00015,00016 B Frame Load capacity 1 to Tractive force 2000 N Unladen weight 400 kg B-frame triple loadable 1000 x 600 mm 1.2.1 Load dimensions (length x width) mm 1210 x 810 1210 x 1010 / 1010 x 630 1.5 Load capacity 1 Q kg 1000 1 trolley: 1000 2 trolleys: 2 x 500 Weight 2.1 Tare weight kg 408 Wheels/ Chassis 3.1 Polyurethane tires 3.2 Tire size mm ⌀ 200 3.5 Number of wheels 2 (center axle) 3.6 Track width b10 mm 810 Basic dimensions 4.2.1 Overall height lowered/raised h15 mm 313/353 4.4 Lift h3 mm 40 4.12 Coupling height lowered/lifted h5 mm 185/225 4.14 Drawbar length l0 mm 533 4.16 Cargo bed length/max. length of trolley 2 l3 mm 2030 4.18 Loading area width b9 mm 834 4.19 Overall length l1 mm 2859 4.21 Overall width b1 mm 1070 4.32 Ground clearance Center wheelbase lowered/raised m2 mm 0/40 4.35 Turning radius LTX 50/LTX 70 Wa mm 3350/3450 4.39 Length of frame opening (inside frame dimension) l9 mm 1994 4.40 Length of center plate l10 mm 350 4.41 Height drawbar lowered/raised h11 mm 170/210 Performance data 5.1 Max. Driving speed 3 km/h 15 Otherwise 8.5 Clutch articulated steering system Errors excepted

Condition: good (used), Year of construction: 2003, operating hours: 48,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 182 cm³, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 650 mm, plate width: 650 mm, total length: 4,470 mm, total width: 1,670 mm, total height: 2,180 mm, overall weight: 4,410 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 750 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 Dsbevbgtne Hdiu Dout warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

Condition: good (used), Year of construction: 2013, Ref. -No.: 10450 Manufacturer: SHW Type: UNISPEED 5 Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX X-Travel: 2000 mm Y-Travel: 2300 mm Z-Travel: 1300 mm B-Axis: 360 ° Dob Hdiewiabmsu Deut C-Axis: 360 ° W-Axis: 1500 mm Table Load: 15000 kg Max. Tool Weight: 25 kg Max. Tool Length: 500 mm Max. rotary table diameter: 1600 O Table speed range: 5 min/-1 Tool Taper: HSK 100 Tool Piece Magazine With: 150 Pcs./pcs. Turning Speed Range - Stepless: 22 - 8000 RPM Max. Torque: 40 Nm Feed Speeds X/Y/Z Axis: 2 - 30.000 mm / min axes: 5 Rapid Travel X/Y/Z: 30.000 mm / min acceleration: 2 m/s² Dimensions Of The Machine Ca.: 8,4 x 7,1 x 5,3 m Operating hours: 42.499 H Tool change time: 10 s Further information: automatic universal milling head, 360 x 1°; 180 x1° compact coolant system, make Knoll, type KF150/950 high pressure pump belt filter coolant temperature control Blum laser measuring system Renishaw RMP 60M infrared measuring system 140 tool holders HSK 100 included Machine can be inspected under power by appointment.

Condition: like new (used), Year of construction: 2016, operating hours: 19,765 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, tool mount: 60 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, rotational speed (max.): 10,000 rpm, workpiece weight (max.): 4,000 kg, total height: 3,162 mm, total length: 8,575 mm, total width: 5,730 mm, bar diameter: 160 mm, overall weight: 26,800 kg, tool length: 500 mm, CNC controller: Siemens 840D solutionline CELOS, ERGOline Axes X-axis travel mm: 2.600 Y-axis travel mm: 1.100 Z-axis travel mm: 900 C-axis degrees: C-axis direct drive B-axis degrees: swivel head (B-axis) Feed rates m/min: 80 / 60 / 60 Rapid traverse m/min: 80 / 60 / 60 Acceleration in the axes m/s2: 5 / 6 / 6 Worktable Number of pallets: 1 integrated with rotary pallet Table dimensions mm: 2.600 x 1.100 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 10.000 Milling/turning table nc Duob Hdiuowhk E Tj Djt Number of pallets: 1 left side Table dimensions mm: Ø1.050 Maximum workpiece size (D x H) mm: 1.100 x 930 x 3.200 Max. workpiece weight kg: 2.000 Table rotation speed rpm: 725 Drive power kW: 44 / 32 kW (40/100% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 60 Tool changer: Chain - Double gripper Max. Tool Diameter: 160 With occupied neighboring places mm: 115 Max. Tool Length mm: 500 Max tool weight kg: 12 Chip-to-chip time s: 7,5 Equipment Chip conveyor Swivel head Blowing air through spindle center selectable via M-function Signal lamp Mist collector 3D quickSET Coolant gun Oil skimmer Dynamic package (linear drive X/Y/Z axis) Ready for internal cooling (40/80 bar) OPTICAL TYPE PROBE SENSOR (RENISHAW) PROVIDED Blum laser NT Hybrid Internal cooling supply 40 BAR Rotating viewing window with laminated glass Package Mill / Turn Separation wall for 2 working spaces Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 L Machine running times Under power: 61.760 Operating Time: 19.765 Basic machine dimensions / weight Length mm: 8.575 Width mm: 5.730 Height mm: 3.162 Weight kg: 26.800

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Djbjwhkq Ns Hdiu Deut

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: X-axis: 3,060 mm Y-axis: 1,260 mm Z-axis: 150 mm Work table: 6 ATS workpiece supports, each with 3 vacuum suction cups 6 rear workpiece stops, program-lowered, installed in one support each 6 front workpiece stops, program-lowered, installed in one support each, positioned approximately 970 mm from the rear 2 + 2 side workpiece stops 4 lifting rails, pneumatically program-lowered, for positioning heavy workpieces Vacuum pump 90 cbm/h Machining head equipment: Drilling head BH 21 L with: 14 vertical drilling spindles, each individually accessible 2 + 2 horizontal drilling spindles in the X direction Grooving saw, diameter 120° fixed in the X direction Milling spindle 12 kW, HSK 63 F Rotation speed 1,000 - 24,000 rpm Rotation right and left C-axis 360 degrees for adapter units 18-station tool magazine Safety features: Dsb Hdjwhw Ihoiu Deut * Safety mats in front of the machine * Protective grille on the left with access door XP 600 control system with NC HOPS 4 programming software Without tools and units Optionally available: * Adapter unit with lock case for door machining * Adapter unit with pivoting milling unit * Adapter unit with saw

Condition: good (used), Year of construction: 2000, Ref. -No.: 10427 Manufacturer: OMV Type: MAV 412 Year of construction: 2000 Type of control: CNC Control: HEIDENHAIN TNC 426/430 Storage location: Halberstadt Country of origin: Italy X-Travel: 1200 mm Y-Travel: 850 mm Deb Hdijwiaaieu Dsut Z-Travel: 800 mm B-Axis: +/- 95 ° C-Axis: 0,0001 ° NC swivel rotary table: 520 O Table Load: 3000 kg Table surface: 2300 x 980 mm Tool Taper: HSK 63 Tool Piece Magazine With: 20 Pcs./pcs. Spindle Speed: 0 - 16.000 RPM Turning Speed Range - Stepless: 0 - 20.000 mm / min Drive Capacity - Spindle Motor: 26 kW Total Power Requirement: 36 kW Weight Of The Machine Ca.: 17 t Dimensions Of The Machine Ca.: 5,4 x 4,4 x 3,1 m Further information: Operating hours: 32500 h Spindle hours: 10000 h - IKZ (internal cooling) - Milling spindle overhaul: Motor winding, bearing, tool clamp (2022) - AXA FSB400 chip conveyor (year 2021) - Compressed air preparation renewed (2023)

Condition: used, Year of construction: 2007, Overview The aseptic PET line was manufactured by KRONES in 2006/2007. It can fill non-carbonated drinks and juices. The line is for sale, as the owner is focusing on other products in the future which do not require aseptic filling anymore. The overall condition of the line is good, as the line was regularly maintained. Tech Specs Capacity: max. 26,400 bph Suitable for still beverages Filling temperature range: 5°-20° Screw Cap 28mm and 32mm YOM 2006/2007 The Plant in Detail Manufacturer: Tanner Machine Type: Preform Tipper Manufacturer: Tanner Machine Type: Preform Feeder Manufacturer: Krones Machine Type: Stretch Blow Moulder Model: CONTIFORM S14 Manufacturer: Krones Machine Type: Aseptic Rinser/Filler/Capper    Model: PET-ASEPT Variojet/Sensometic Manufacturer: Krones Machine Type: Feeding System for Closures Manufacturer: Krones Machine Type: Inspection Unit Model: CHECKMAT 731 Manufacturer: Gesete Machine Type: Container Dryer Model: ECO Line Manufacturer: Krones Machine Type: Labeler Model: CONTIROLL Manufacturer: Krones Machine Type: Inspection Unit Model: CHECKMAT 731 Manufacturer: Krones Machine Type: Labeler Model: SLEEVEMATIC & SHRINKMAT Manufacturer: Krones Machine Type: Tray Shrinkpacker Model: VARIOPAC TFS Manufacturer: Krones Machine Type: Container Transport Model: SYNCO Manufacturer: Krones Machine Type: Container Transport Model: MULTICO Manufacturer: Comac Machine Type: Handle Applicator Model: H 40/2 Manufacturer: GEA Machine Type: Homogenizer    Model: NS5180 Energy Manufacturer: Krones Machine Type: Flash Pasteurizer    Model: Asept J Manufacturer: Krones Machine Type: Mixer Model: Contiflow 30/2 Manufacturer: Krones Machine Type: Sterile Water Unit Manufacturer: Krones  Machine Type: Palletizer Model: PRESSANT Manufacturer: Robopac Machine Type: Stretch Wrapper Model: Genesis Manufacturer: Krones Machine Type: Pallet Transport Model: PALCO Dusb Hdiuerx Ecno Det