Used Mc Cormick Mtx 185 for sale (6,137)

Condition: used, continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg Cgjlinowd Ixvj Hi Dst

Condition: good (used), Year of construction: 1997, - Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21 mm - Material slide length N - Last installed on INDEX DG 20 - Centering device Cslin Hiewfd A To Dsgt - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm 3 bar loaders are available!

Condition: ready for operation (used), Year of construction: 2023, operating hours: 255 h, General Data Measurements width 1700 mm Measurements depth 1600 mm Measurements height 2200 mm Machine weight 1970 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 10000 Spindle motor power 7 KW Number of axis 3 Movement X-Axis Movement 350 mm X-Axis Feed Force 2400 N X-Axis Rapid Traverse 24 m/min Y-Axis Movement 250 mm Y-Axis Feed Force 2400 N Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 300 mm Z-Axis Feed Force 4000 N Z-Axis Rapid Traverse 24 m/min Tools Max weight 5 kg Max tool diameter 63 mm Max tool length 200 mm Type of tool holder ISO 30 Additional Equipment 8 bar high pressure coolant device Chip conveyor 500 mm Cleaning gun/multiflow Oil mist separator Tightening bolt SK 30 NC dividing head TANI100 without chuck Manual tailstock for NC dividing head TANI100 Chuck flange for NC dividing head TANI100 Manual 3-jaw chuck 100 mm This 3-axis EMCO Emcomill E350 vertical machining centre was manufactured in 2023. It features a Siemens 828D control, electronic handwheel, and a tool magazine with 20 positions. The spindle speed reaches up to 10,000 rpm, and it includes a chip conveyor and high-pressure coolant device. If you are looking to get high-quality milling capabilities, consider the EMCO Emcomill E350 machine we have for sale. Contact us for more information about this machine. Application Types Cgjliewfikisn Hi Dst Milling

Condition: excellent (used), Year of construction: 2017, 5-Axis Horizontal Machining Centre. MCM Tank 5-Axis. Year 2017. Siemens 840D sl. 2 x Station Pallet Changer 630 x 800 mm. Pallet load max. 1500 kg. NC-Rotary table. Rotary axis C-Axis 360°/0.001°. NC-Swivelling head (swivelling in Y-Plane). Swivelling axis A-Axis +80°/-95°. X 1300 mm. Y 1400 mm. Z 1400 mm. Rapids X,Y,Z to 50.000 mm/min. Cgslisgx H A Dsn Hi Dst Workpiece swing diameter max. 1400 mm. Workpiece height max. 1300 mm. Spindle taper ISO 50. Spindle drive motor rating 40/52 KW. Spindle speeds max. 10000 rpm. Torque at the spindle max. 298/388 Nm. Tool magazine 199 Positions. Tool length max. 470 mm. Linear scales X,Y,Z Axes. Chip conveyor. 4-colour signal lamp Full guarding. Workpiece shower. Tool cone cleaning. Oil skimmer. Temperature compensation for the electro-spindle. Tool monitor. High pressure coolant through the spindle 65 bar. Renishaw probe RMP 60. Tool balanace control. Tool measurement Renishaw NC4. Hydraulic lines to the table for hydraulic clamping of fixtures/workpiece. High Tech Machine in excellent condition.

Condition: excellent (used), Year of construction: 2018, EMCOTURN E 65 SMY BigBore Siemens 3-axis CNC lathe with counter spindle and driven tools including Y-axis AND C-axes Year of manufacture 2018 30,000 operating hours Machine was used for plastics machining. Machine is in operation and can be tested. Chip conveyor has been recently overhauled. Highly efficient universal lathe for complete machining with stable and precise linear guides. State-of-the-art SINUMERIK 828D control technology with ShopTurn dialog programming. Main spindle: • A2-6" connection (DIN 55026) • Max. bar capacity ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Counter spindle: • A2-6" connection (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: 12-station IDI 30 radial tool turret with directional logic for up to 12 driven tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel range: +/-40 mm - Hollow clamping cylinder including draw tube - C-axis for main/counter spindle - Mechanical spindle brakes - Sinumerik 828D control system with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive/Ethernet - 10.4" TFT color monitor - 3D simulation, and much more - Machine light - Coolant system with 3.5 bar coolant pump - Hydraulic unit - Chip conveyor interface - Documentation SuperBigBore 95: Allows bar passage up to 95 mm instead of the standard 65 mm (main spindle). Drawbar connection: M102 x 2 Spindle connection (DIN 55026): KK8 Max. speed 3,500 rpm Cgolewf Ni Sein Hi Det Max. torque 380 Nm Max. power 22 kW Max. chuck size 250 mm (315 mm) Differential pressure clamping for main and counter spindle: -Sensitive adjustment of the spindle clamping pressure -Counterpressure principle -Manually adjustable hydraulic clamping pressure analog/digital converter -Display on the machine control -Adjustment range 6-60 bar -The clamping pressure on the workpiece depends on the clamping cylinder and the clamping device Electronic handwheel Parts collecting device E65 Bar loader: EMCO SL1200 FOR E45/E65/MT45/MT65/ HT45/HT65-PM INCL. EMCO INTERFACE short bar loading magazine for the automatic feeding of bar stock with diameters from 8 to 95 mm and lengths up to 1200 mm. The loading magazine is particularly characterized by its compact footprint and ease of use. EMCO Interface included! Tool measurement Multiflow cleaning gun Chip conveyor 1200 mm: Hinged belt conveyor with ejection height of 1200 mm Suitable for: Long steel chips, chip balls, and wool shavings Dry and wet machining 14 bar high-pressure coolant system Coolant can be switched to air through the tool turret: - Programmable via M command

Condition: good (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: S6AT2502, travel distance X-axis: 250 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 5,000 rpm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,000 mm, tool mount: 30 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of slots in tool magazine: 12, Equipment: chip conveyor, rotational speed infinitely variable, Equipment Highlights: - With Y-axis and counter spindle - Tool turret with 12 stations, all driven - Tool holder: VDI 30 Cgolswd U A Ujin Hi Djt - Chip conveyor included - Incl. three-jaw chuck (RÖHM, Ø 250 mm) Technical Specifications: Travel: - X-axis: approx. 250 mm - Y-axis: +40 / -40 mm - Z-axis: approx. 600 mm Drive & Power: - Max. drive power: 6.7 kW - Main spindle speed range: 0–5,000 rpm - Y-axis feed force: 7,000 N - Rapid traverse: 12 m/min Counter spindle: - Chuck diameter: max. 200 mm - Speed range: 0–7,000 rpm - Travel range: max. 580 mm Electrical: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 85 A

Condition: used, continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm Celinowdwflj Hi Djgt electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Condition: good (used), Year of construction: 2000, - Guide channel (oil-damped) Cgjlinewfdwko Hi Djt - Max. bar length 3,200 mm - Included guide channel: D 17 mm - Material slide length N - Last installed on INDEX DG 12 - Centering device - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 828 D Main Drive Spindle speed range 50-12000 Number of axis 3 Movement X-Axis Movement 900 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 500 mm Cjlin Hju N Nz Uei Degt Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 24 m/min Table Outer length 1000 mm Outer width 520 mm Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table 600 mm Table load 800 kg Tools Slots in storage 20 Media Chip conveyor Yes Additional Equipment Rinsing gun Cooling medium tray 360l IKZ 15 bar This 3-axis EMCO EmcoMill E900 was manufactured in 2014. A vertical machining center featuring a Siemens 828D control, it offers a spindle speed up to 12,000 rpm and torque of 83 Nm. It has a travel distance of X 900mm, Y 500mm, Z 500mm, and a rapid traverse rate of 24m/min. The machine includes a chip conveyor, a 360l cooling medium tray, and a 20-tool magazine. If you are looking to get high-quality milling capabilities consider the EMCO EmcoMill E900 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Information: - 40-foot PW Super High Cube - Exterior dimensions: approx. 12192 x 2500 x 3250 - Interior dimensions: approx. 12114 x 2430 x 2963 Colin Howha Htei Degt - Capacity: 90.1 m³ A 40-foot freight container with a special exterior height of 325 cm is being auctioned from Braunschweig. Loading is free of charge on site. Transport is only possible by low-loader.

Condition: new, 743 782-20 + 743 781-20, Memco Pana40 Plus Ultraslim 2D infrared light curtain Cgjloq S R Tisin Hi Dot Model: 743 782-20, 743 781-20 Condition: New

Condition: good (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: R2AT0402, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, total height: 2,200 mm, total length: 4,000 mm, total width: 1,800 mm, tool mount: 30 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of slots in tool magazine: 12, Equipment: chip conveyor, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 33 A Additional features: - Includes tailstock - Includes 3x three-jaw chucks (Ø 160 mm) Notes: - The tool holders mounted on the turret are not included in the scope of delivery. - The loading robot, which may be visible in photos, is not included in the offer. Cgjlin Hijwd Uwls Dot

Condition: excellent (used), Year of construction: 2019, EMCOTURN E65 SMY- HEIDENHAIN 3-AXIS CNC LATHE WITH COUNTER SPINDLE AND DRIVEN TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal lathe for complete machining with stable and precise linear guides. State-of-the-art control technology HEIDENHAIN CNC PILOT 640 including dialog programming. Main spindle: • A2-6" connection (DIN 55026) • Max. bar capacity ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Counter spindle: • A2-6" connection (DIN 55026) Colinswfmzfo Hi Dsgt • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-station VDI 30 tool turret radial with directional logic for up to 12 driven tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40 mm Includes: • Hollow clamping cylinder including drawbar • C-axis for main/counter spindle • Mechanical spindle brakes • Heidenhain CNC PILOT 640 control system - Dialog programming - USB interface - Network drive / Ethernet - 15.6" TFT touchscreens - 3D simulation, and much more • Machine light • Coolant system including coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the counter spindle • Hydraulic unit • Chip conveyor interface • Documentation Including: X3Z640 1 ST ELECTRIC HANDWHEEL HR510 Heidenhain Angled cable X3Z470 1 PC DXF Converter Heidenhain TNC6x0 X3Z480 1 PC License #63 Turn Plus from Heidenhain X3Z250 1 PC License #151 Load Monitoring from Heidenha S6Z26H 1 PC Glass Scale X-Axis Heidenhain S6Z265 1 PC Glass Scale X-Mechanical Siemens/Fan S6Z265H 1 PC Glass Scale X-Electrical Heidenhain S6Z560 1 PC License #17 Touch probe from Heidenhain S6Z110 1 PC Setting Gauge VDI 30 S6Y720 1 PC Part Catch Device E65-610 X1Z140 1 Loader Interface A8, S2, S3, S4, S6, R2, R6, R9PM R9Z035 1 Triple Side LED Warning Light S6Z300 1 Conveyor Belt S6E S4Z140 1 Coolant Gun 438120 1 Chip Conveyor E65 S6Z710 1 Oil Mist Separator E65RD S6Z150 1 Control Panel Cooling Unit SIEM. S6E R3Z580 2 Foot Switches S6Z080 1 High Pressure Pump 50Hz S6E/14 Bar Machine No.: S6E182371 Year of Manufacture: 2019

Year of construction: 1985, Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18856 Specifications: - 1985 model - Everything comes with it Celevgybpein Hi Dogt - Controll box - Engine - 3 Transport lines - Small sieve - Ready for delivery Description: Older cubisator sold with 3 transport belts and a small sieve. Ready for delivery

Condition: good (used), Code: 0101 Colin Hiswd Szzs Djgt Brand: SAMCO Model: UNILEV 15 Universal sanding machine for straight and round edges, drawers, chair and sofa elements, panels and various Technical data: Tilting work tables 0-30 degrees Work table length mm 1440 Belt motor power Kw 3 Belt oscillation 0-25 mm Operating pressure 6 bar Sanding belt length mm 2170 Sanding belt width mm 150 Vertical oscillating unit displacement mm 125 Overall dimensions mm 1500 x 750 x 950 h Weight kg 450

Condition: used, axle configuration: 2 axles, first registration: 05/2004, suspension: air, color: other, tire size: 445/65 R22.5, Year of construction: 2004, Axle configuration Reference size: 445/65 R22.5 Axle brand: SAF Cjliswgrbaon Hi Djgt Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire profile left: 15%; Tire profile right: 20% Rear axle 2: Tire profile left: 25%; Tire profile right: 20% Weights Unladen weight: 8,250 kg Payload: 28,750 kg GVW: 37,000 kg Vehicle condition Damage: none

Condition: used, MGF100TF-30, SMC Pneumatic Compact Cylinder/Guide Table Model: MGF100TF-30 Condition: Used Colin Hierfb Tvs Degt

Condition: excellent (used), Year of construction: 2017, Functionality: unexamined, machine/vehicle number: 173902, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 1,500 mm, total width: 1,100 mm, total length: 1,400 mm, table width: 200 mm, table length: 600 mm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 80 rpm, overall weight: 800 kg, input current: 16 A, - Operating voltage: 3 x 400 V Cgjliswdnz Den Hi Dot - Frequency: 50 – 60 Hz - Number of table slots: 4 - Tool holder: SK 30 EQUIPMENT: - Three-axis digital readout (Heidenhain) - Collet set included

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Cgelin Hisv D If De Det Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 3,600 kg, shelf length: 3000mm shelf width: 1300mm clearance: 400mm 6 hydraulic cylinders Piston diameter 85 mm Machine control from the touch panel Built-in electric oil heating Electric time opening Safety break Year of production 2025 NEW Logic control system Colin Hjwfrudoi Degt Overall dimensions: length: 360 cm width: 160 cm height: 203 cm

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Cjlin Hiswcdytj Dogt Two machines are available

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. width of the processed element 230mm - max. height of the processed element 160mm number of spindles 4: 1) horizontal lower 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm from above: - input rollers pulling, toothed 6 pcs including 2 double - output rollers pulling, rubber 2 pcs from below: - input roller toothed pulling, metal, torsion in the lower table + - smooth metal pulling outfeed roller - pneumatically adjustable rollers - length of the infeed table (with pneumatic feeder) 3390mm - possibility of working without switching on the pneumatic feeder, - top adjustable/down - central lubrication - electric planing thickness adjustment - smooth feed speed adjustment - feed on Cardan shafts - 4kW feed motor - closed in the cabin Colin Hjin Elpei Dsgt - diameter of the exhaust nozzle 4x120mm - dimensions length/width/height 7000x1950x1700mm, - weight approx. 3000kg - for wet and dry wood - pneumatic feeder on the infeed table, - used planer, very good condition Net price: PLN 89900 Net price: EUR 21160 Net price calculated at the rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, TLM1613B-20, SMC, PFA hose, black, L=20m Cgolin Hijvrhmds Djt Model: TLM1613B-20 Condition: New

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - max. width of the workpiece 230mm - min. width of the workpiece 15mm - max. height of the workpiece 160mm - min. height of the workpiece 10mm 7 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) horizontal upper 230mm 7.5kW 6) horizontal upper 230mm 7.5kW 7) horizontal lower 230mm 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 3, 5, 6 spindles electrically adjustable from the desktop required dimension (ATS) - 2 x 0.37kW motor Cgolsryv Nyjin Hi Dot - 40mm spindle diameter - all spindles equipped with brake from above: - 8 infeed, pulling, toothed, metal rollers, including 2 double - 3 outfeed, pulling, rubber, double rollers from below: - infeed, toothed, pulling, torsion roller - 3 outfeed, pulling, metal, smooth rollers - pneumatically pressed rollers - length of the infeed table 2480mm - central lubrication of the table - electric adjustment of the planing thickness - 0.56kW body lifting motor - smooth regulation of the feed speed on the inverter 6-24m/min - 3.7kW feed motor - feed on Cardan shafts - diameter of the exhaust port 7x125mm - dimensions length/width/height 5520x1930x1900mm - weight about 4000kg ADVANTAGES - 7 heads - ideal for wet and dry wood - with ATS - original DTR + CE documentation - unpainted - used planer, perfect condition Original photos Net price: PLN 169,900 Net price: EUR 39,980 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7263 TECHNICAL DATA - max. width of the processed element 230mm - max. height of the processed element 150mm number of spindles 5: 1) horizontal lower 230mm 5.5kW 2) vertical right 150mm 5.5kW Cgelin Hijrm Ipuo Dot 3) vertical left 150mm 5.5kW 4) horizontal upper 230mm, electrically adjustable up/down 7.5kW 5) horizontal lower 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm - all spindles equipped with brakes from above: - 6 input rollers, pulling, toothed, including 2 double - 2 output rollers, pulling, rubber, double from below: - input roller toothed pulling, metal, torsion - pulling metal, smooth output roller - pneumatic pressure on the side input - 2 pressures on the side - pneumatically adjustable rollers - length of the input table 2470mm - central lubrication - electric adjustment of the planing thickness from the desktop - smooth regulation of the feed speed - feed on Cardan shafts - 4kW feed motor - diameters of the exhaust nozzle 5x125mm - dimensions length/width/height 4620x2050x1950mm - weight about 3500kg ADVANTAGES - for 5 heads - for wet and dry wood - DTR documentation - used planer, very good condition Original photos A film from the start-up machines: youtube.com/watch?v=PiivKG5U-ew Net price: PLN 89,900 Net price: EUR 21,150 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)