Used Mc Cormick Mtx 185 for sale (6,137)

Condition: used, Year of construction: 1996, offer consists of: Horizon MC-80a air-suction collator - model: air-suction collator - bins: 8 - error avoidance: misfeed-, doublefeed- and jamming control - expandable to 6 collators (48 bins) Cgolq H Tou Sr Shscqjt programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - selective collating - sheet size: max. 470x318mm; min. 160x110mm - processing strength: 50-260g/sqm - loading height: 50mm/ bin - production speed: max. 5.100 cycles/h - power: 400V - 1,86kW - dimension: 660x810x1660mm - weight: 229kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: as good as new (ex-display), machine/vehicle number: Nr. 8, VDI: 50 mm 1 piece available cheap for sale Cjlqodrk Ize H Tcqjgt

Condition: good (used), Year of construction: 1996, age 1997 film wrapping machine L sealer Cgjlq H Tceuqn Iboqet hand feeding shrinking tunnel mobile sub-frame

Condition: used, Year of construction: 1982, workpiece weight 60 kg workpiece length 700 mm Cjlq Hjt Hxbqe Tcqsgt diameter 500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, axle configuration: 3 axles, wheelbase: 8,060 mm, first registration: 11/2017, Year of construction: 2017, General information Odometer reading: 6,439 km Axle configuration Colq H Tovnd Hlscqogt Rear axle 1: Tire profile left: 50%; Tire profile right: 50% Rear axle 2: Steered; Tire profile left: 50%; Tire profile right: 50% Rear axle 3: Steered; Tire profile left: 50%; Tire profile right: 50% Functional Pump: Yes High pressure pump: Yes Water installation: Yes Water tank: Yes Hose: Yes More information Contact John de Koning for more information.

Condition: refurbished (used), Functionality: fully functional, warranty duration: 6 months, type of input current: AC, nominal voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, nominal current: 3 A, nominal frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, outer dimension length: 1,850 mm, outer dimension width: 100 mm, overall weight: 142 kg, inner dimension width: 863 mm, inner dimension length: 1,723 mm, inner dimension height: 733 mm, tank capacity: 595 l, energy consumption: 5 kWh, power: 0.4 kW (0.54 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); Celq H Terhwt Sscqogt (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up Btqqmuwb - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: used, offer consist of: - compressor for MC-80 Horizon Kompressor - compatibel with: Horizon MC-80 - weight: kg Cjlq H Tju Tdmkjcqogt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 8M2807A, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection pressure: 1,389 bar, injection weight: 6,098 g, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Cgjlq H Tovvityocqot Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table Cjlqerb Dyzo H Tcqegt -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Cgelq H Tcet Hw H Ejqot Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: good (used), axle configuration: 3 axles, wheelbase: 8,020 mm, first registration: 02/2009, Year of construction: 2009, General information Odometer reading: 1 km Axle configuration Rear axle 1: Max. axle load: 9000 kg; Tire profile left: 50%; Tire profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tire profile left: 50%; Tire profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steered; Tire profile left: 50%; Tire profile right: 50% Dimensions Dimensions (L x W): 1190 x 250 cm Weights Empty weight: 14,300 kg Payload: 29,700 kg GVW: 44,000 kg Functional Pump: Yes High pressure pump: Yes Water installation: Yes Hose: Yes Condition Technical condition: good Visual condition: good Celevndy Eoq H Tcqogt More information Contact John de Koning for more information.

Year of construction: 1985, Condition: good (used), Travels: X-axis 9.500 mm Y-axis 4.100 mm Z-axis 950 mm Cgelq H Tod Svh Hecqot W-axis 900 mm Main spindle speeds (infinitely variable) 3,15 to 1000 rpm Spindle motor power 58 kW Feed range (infinitely variable): X-axis 0,1 - 9600 mm/min Y-axis 0,1 - 5600 mm/min Z-axis 0,1 - 5600 mm/min W-axis 0,1 - 5600 mm/min Accessories - Floor plate 6 x 4 m (CNC controlled B- and V-axis) - Table 2 x 2 m

Condition: reconditioned (used), Year of construction: 2000, Functionality: fully functional, warranty duration: 12 months, All of our advertised machines and spare parts are supplied after a complete overhaul, only the skeleton remains, we replace all sliding, rolling, sealing and locking components in gears, bearings, thermistors and brakes in drives, we fit new HDDs in a clean installation. Everything is debugged and carefully tested. Transmission completely rebuilt in 2023, debugged, tested, fully functional, with aftermarket maintenance. Price is without applicable VAT. For sale 2 pieces. Cjlq H Tsq Tcduecqegt

Year of construction: 1997, Condition: good (used), Probe measuring fixed The machine can be equipped with new software and control system according to customer's requirements. Measuring range X = 1000 mm Y = 860 mm Z = 660 mm Measuring accuracy in µm 3.6µ + L/200 Stylus changing device Manufacturer: ZEISS Type designation: AUTO-RUN Software Operating system: HP Unix Cgslq Hsb Dr Nmj Tcqst Measurement software: UMESS UX Installation and commissioning by our service partners possible. Price: on request We will be happy to provide you with a detailed offer.

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: MR310693610, Technical data Cgolq H Tsqlah Njcqst Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in taret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360° 30 Max. punch diameter (size D)- separate 81 mm Maximum punch diameter in XMTE4M magazine 4 x 31.7 mm Maximum punch diameter in XMTE6M 6 x 24.0 mm Maximum punch diameter in XMTE10M 2 x 24, 8 x 12.7 mm Y-axis working range (with Multitool) 1300 mm Y-axis working range (single tool) 1250 mm X-axis working range (with Multitool) 2550 mm Automatic repositioning of X-axis limbs up to 10,000 mm Max. Y-axis positioning speed 60 m/min. Max. positioning speed in X axis 60 m/min. Axis acceleration 10 m/sec² Number of strokes- ( 1.0mm increment ) 1000/min ( 20mm step ) 450/min Number of strokes during marking 10 - 2000/min Sheet thickness (mm) 0,5 - 10 Work table size for X=1250mm 2370 x 4500 mm Tool or Multitool change time approx. 2 seconds Tool change time in Multitool approx. 0.6 seconds Max. opening of the jaws 11 mm Max. stroke 30 mm Power supply 3 x 400 V/50 Hz Machine power 8.5 kW Average power consumption Energy 4,5 kW Maximum sheet weight (kg) 200 kg Maximum positioning speed can be used up to a sheet weight of 80 kg. Speed reduction to 50% for weights from 100 to 200 kg. Pneumatic connection 6 ± 1 bar Air consumption 0,1 Nm≥/h Oil filling for hydraulic system - hydraulic oil 135 l Overall machine dimensions - Y x X x Z 3630x4840x1900 Weight 7800 kg Operating time 28 966 h. Actual working time 14 190 h. List of tools: 10 local multiool single rectangular tool rectangle ultra light fully guided Number of rotary tools 3 pcs Fully functional, very good condition, Serviced by authorized service, complete after service inspection, possibility to test and demonstrate the machine in operation, loading can be arranged, further information on request

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW Cgelq H Tet Hwy Eecqot weight of the machine ca. 3800 kg dimensions of the machine ca. m

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 920 mm band speed 35 + 70 m/min Cslqevn Uzas H Tcqsgt connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 200 kg

Condition: new, Year of construction: 2024, fuel type: diesel, power: 37 kW (50.31 HP), Field of application: Internal logistics Lifting capacity: 2.500 kg Rental currency: EUR Cjlq Hjuytdne Tcqogt Please contact Jan De Lepeleer for more information

Condition: used, Functionality: unexamined, machine/vehicle number: 71795, measuring range X-axis: 550 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 450 mm, total height: 2,725 mm, type of input current: AC, total width: 1,300 mm, total length: 2,100 mm, overall weight: 2,600 kg, input voltage: 230 V, used cmm measuring range (X/Y/Z): 550 x 1200 x 450 mm software: Zeiss UMESS-UX sensor system: Zeiss ST controller: Zeiss C87 8-bit Cslsvd Df Tsq H Tcqegt

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Cgelet Hwyroq H Tcqot weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: new, Year of construction: 2024, Field of application: Internal logistics Rental currency: EUR Please contact Jan De Lepeleer for more information Cgolq H Tcjuygrxjqet

Condition: used, Functionality: unexamined, machine/vehicle number: 70513, measuring range X-axis: 850 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,000 kg, type of input current: AC, overall weight: 2,600 kg, input voltage: 230 V, used cmm measuring range (X/Y/Z): 850 x 1200 x 600 mm software: Zeiss UMESS-UX Cgslq H Tcjvd Dlysqjt sensor system: Zeiss ST controller: Zeiss 85 8-bit

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm total power requirement 40 kW Celq Hjt Hwx Is Tcqsgt weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t Cgolq H Tcot Hwtfoqjt dimensions of the machine ca. m

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t Cgslqot Hwrhs H Tcqet dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.