Used Mc Cormick Mtx 185 for sale (6,137)

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Cgjlec Nir Reinrppjt -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 185 mm -Short cones: 6 -Number: 1x discs available -Price: per piece -Weight: 4 kg

Condition: used, Functionality: fully functional, machine/vehicle number: 42163294, Year of construction: 2016, operating hours: 1,423 h, load capacity: 2,500 kg, lifting height: 4,050 mm, fuel type: diesel, engine type: Yanmar, drive type: Diesel, net weight: 1,820 kg, Truck-mounted forklift Chassis number: 42163294 Load center of gravity: 600 Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 23x8.5-12 Front tires condition: 60 - 80% Rear tires type: pneumatic Rear tires size: 26x12-12 Cjlinovxbzhsrppogt Rear tires condition: 60 - 80% Description: Device has been visually and technically refurbished. Maintenance including drive and engine oil replaced. UVV inspection renewed. Side shift, 3rd valve, 4th valve, roof cover, CE certificate,

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Cgslinrpsibarqjpot Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: excellent (used), Functionality: fully functional, fuel type: electric, color: other, overall weight: 12,270 kg, empty load weight: 8,170 kg, maximum load weight: 12,000 kg, tire size: Vorne 4x 365x15" / hinten 2x 250x15", mast type: telescope, Year of construction: 2019, operating hours: 390 h, machine/vehicle number: 0614, Pick & Carry crane Year of manufacture: 2019 Condition: Used Crane load capacity without jib: max. 12,000 kg Crane load capacity with jib: max. 6,000 kg Fork load capacity: max. 5,800 kg at 1,300 mm load center Lifting height without jib: max. 7.60 meters Lifting height with jib: max. 10.80 meters Lifting height with forks: max. 7.20 meters Length: 3200 mm Width: 1485 mm Height: 1938 mm Own weight: 12270 kg Steering: Via the rear axle, steering angle -90°/+90° Mast type: Telescopic (with hook, jib, forks) Battery: 80V - 810 Ah Motor: 2 electric motors in AC 6.5KW 80V Front tires size: 365x15" Cgolsvvl Tpsinrppst Rear tires size: 250x15" Radio remote control Electronic load limiter Non-marking tires Special paint finish Jib + extension Fork carrier with manually telescopic forks

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Table swivel: + - 45 ° Further data: See PDF Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Chain width: 17 mm Celstunbujinrppjgt Motor: 2.2 kW

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm z-travel 450 mm travel x vor 1000 mm control mc4va Cgolioucguponrppst total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg Coloc Sxqkoinrppjgt

Condition: used, Year of construction: 2006, Cutting Mills Wittmann MC 4660 31 KW Year: 2006 Cgolinjrl Rvhjrppst Power: 31 kW Application: Feed opening: 600x400 mm No. rotor knives: 3 No. stator knives: 2 Rotor-Ø: 400 mm Rotor-width: 600 mm Price: € 18.400,00 contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Fagor MOCA-725 Vers. 09A Length scale with MC-A reading head Vers. 30A SN: 118001318050738 - total length: 82,5cm,used, good condition, 100% working, scope of delivery according to photos Cgolinet Nbzferppot

Condition: used, The supply includes a gas boiler (see photo), but the system can also be connected to other boilers with different fuels. Cell dimensions: depth mt. 7.20 width mt. 5.50 loading height mt. 3.20 total dryer height mt. 4.50 Technical data: 4 fans with 2 speeds air flow rate 120,000 Nmc/h max electrical power 12 kw Colinrpetw H Stepogt thermal power 100,000 Kcal/h max peak for drying any type of essence spray flow rate 50 l/h at 3 bar Aluminum structure. Cell production year: 1991 Year of installation of new electronic control system: 2008

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning length: 550 mm, turning diameter: 400 mm, spindle speed (max.): 5,000 rpm, controller manufacturer: Siemens, controller model: 810 D ShopTurn, number of slots in tool magazine: 9, TECHNICAL DETAILS Cslovvuaxoinrppogt Control: Siemens 810 D ShopTurn Turning diameter: 280/400 mm Spindle speed (max.): 5,000 rpm Turning length: 550 mm Tools Tool holder type: steel holder, 9 pieces Tool holder: VDI 30 Turret positions: 12 pieces EQUIPMENT - Driven tool stations - Oil mist extraction - Coolant system - Cabin with extraction, Donaldson Tirit DCE brand - Three-jaw chuck, Schunk brand

Condition: used, control Siemens 840D Number of axles 4 St. 2 toll turrets 160 Cslinrpoqn A Rvopegt tool taper HSK 63 spindle turning speed range 24.000 U/min

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 185 mm -Dimensions: 235/120/H170 mm Cgslijd Nn Ifenrppot -Weight: 32 kg

Condition: used, hot runner control device Vetter MC 712 L-P 12 fach 220 Volt price: 2.850 € Cslinekt Uzkorppjgt contact: Mr. Rainer Eckerle

Condition: ready for operation (used), Fagor MOCA-1145 length scale with MC-A reading head SN: 118001319060894 - total length: 125cm, used, minor signs of wear, 100% functional, scope of delivery as per photos Cgjlinst Iy Uzorppot

Condition: used, Year of construction: 1998, machine/vehicle number: 10260, x-travel:510 mm Cjlsu Hbbzsinrppjgt y-travel:360 mm z-travel:460 mm distance between table and spindle end :150-610 mm Distance between table center and stand guideway:240-600 mm Distance between spindle center and stand guideway:420 mm Max. working area:760 x 380 mm Load capacity of the table:400 kg T-slot (width x number x distance):18 x 3 nx 125 mm speeds::60-8000 min-1 total power requirement:23 kVA dimensions of the machine ca.:2200 x 2000 x 2600 mm weight of the machine ca.:3400 kg 1 used MATSUURA MC 510 VGM machining center with FANUC/YASNAC J300 M control Incl. - 20-fold tool changer - YASNAC J300 M control - Coolant device - chip conveyor - various recordings

Condition: used, Year of construction: 2005, turning diameter 340 mm turning length 1.000 mm Celinetqmr Derppegt control OSP E 100 L greates pass round over bed 530 mm Swing dia. over traverse guideway 420 mm distance between spindles 1.020 mm axis stroke: x-axis 260 (185 + 75) mm z-axis 1.020 mm C-Axis 360 ° Main spindle: turning speed range - main spindle 38 - 3.800 min/-1 power capacity - main spindel 22 / 15 kW transmission ratio 1 spindle nose JIS A2-8 spindle bearing diameter 120 mm max. usable bar diameter 70 mm C - Axis 0,001 ° chucking diameter 250 mm turret: number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 25 mm Drill shank diameter 40 mm tool taper VDI 40 Spindle speed - driven tool stations 45 - 4.500 min -1 power capacity - driven tool-stations 5,5 / 3,3 kW Tailstock: diameter of quill 90 mm quill stroke 120 mm taper of center MT 5 feeds: rapid traverse ( X / Y / Z ) 20 / 10 / 25 m/min rapid traverse C-axis 200 min/-1 feed speeds 0,001 - 1.000.000 mm/min total power requirement 25 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC-Turning- and Millingcenter OKUMA - SpaceTurn LB 300 MC / 1000 - Tool-Drive - C-Axis - Without driven toolholders shown on pictures !

Year of construction: 2016, Condition: used, BERG & SCHMID GBS 185 eac cutting diameter 185 mm weight of the machine ca. 500 kg Celinrsqy Rn Ejppegt machine in good condition

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece Cslinef Rum Esrppjgt -Dimensions: 100/20/H120 mm -Weight: 0.1 kg/piece

Condition: excellent (used), Year of construction: 2011, operating hours: 10,111 h, Functionality: fully functional, machine/vehicle number: M12400511, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Heidenhain TNC 620 X-axis: 1,200 mm Y-axis: 600 mm Z-axis: 600 mm 4th axis: included in delivery, dismantled Spindle Taper: SK 40 Max. speed: 12,000 rpm Condition: New spindle (2024), runs very smoothly Cslinrpevrz Smjpjgt Tool changer Capacity: 30 tools MACHINE DETAILS Control switch-on time: 34,597 h Program run: 11,726 h Spindle run time: 10,111 h

Condition: excellent (used), Zeiss MC 550 coordinate measuring machine Measuring range (X/Y/Z): 550 x 1200 x 450 mm Celinrevtlpfoppsgt Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 450 mm Total height: 2,725 mm Total width: 1,300 mm Total length: 2,100 mm Total weight: 2,600 kg Dismantling by buyer Location: Mühldorf am Inn - Am Industriepark 10 You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2011, machine/vehicle number: R7AZ1201, See AB If you have any further questions, please do not hesitate to contact us. Cjlevwbb Eoinrppjgt

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm Main spindle turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW C-Axis 360 ° Spindle diameter 100 mm chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 axis stroke: x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min turret: tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm tail stock dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm Cgslinrpetqmqhjpst tension force 500 daN total power requirement - kW weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: used, Year of construction: 1994, plate width 630 mm plate depth 500 mm plate height ? mm weight of the machine ca. ? t dimensions of the machine ca. Ø 900 m Cgjlinounupterppot Pallet / Clamping pallet / Interchangeable pallet with hole grid Clamping surface 630 x 500

Condition: used, Gearboxes, pinion gears, angular gears, transmission gears -Reversing gear -Translation: 2: 1 -Drive shaft pulley: 17 mm Ø 105/145/185 mm -Output shaft pulley: 13 mm Ø 120 mm Cgelinrpjd Aghlopst -Dimensions: 540/190/H210 mm -Weight: 28.8 kg