Used Mc Cormick Mtx 145 for sale (6,766)

Condition: ready for operation (used), Year of construction: 2017, 5-AXIS MACHINING CENTER Brand: EMCO MECOF Type: UMILL 1500 Year: 2017 NC: HEIDENHAIN TNC640 HTCI Equipped with: 88-position tool changer 70 bar center coolant Chip conveyor Tool probe Part probe Cobsv Uqv Ho Etxd Hegt Specifications: Table surface diameter: 1400 x 1200 mm X-axis travel: 1500 mm Y-axis travel: 1500 mm Z-axis travel: 1100 mm B axis -/+185° C axis: 360,000 positions Max. load: Table weight 4,500 kg Spindle speed 1 - 12,000 rpm Spindle power (electric spindle) 58 kW Spindle taper HSK100-A Rapid feed 60 m/min Machine dimensions approximately 7,200 x 6,200 x H 4,200 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 27,054 h, Control Unit Brand SIEMENS Additional Equipment machine has a Y-axis in the upper turret machine has Shopturn This Emco Hyperturn 45 Lathe was manufactured in the year 2016 in Austria and has 27054 production hours. It is equipped with a SIEMENS control unit. Cgjbovyl Ris Etxd Het Application Types Turning

Condition: used, Year of construction: 2006, Automatic bar feeder: - Feed channel - Slide length LL - Bar length 3.2 m Cjb Etxstrmtyod Hsgt

Condition: excellent (used), Year of construction: 2011, color: white, 40FT HC container Reefer engine: Carrier, 2,473hrs P.T.I. Certificate (Pre-Trip Inspection) Cargoworthy CSC plated (03/2027) Cgeb Etxsv S E Nvsd Hot Wind-watertight Aluminum T-floor Double refrigerated container doors 380V connection 5-pin -25 to +25 degrees Celsius Inside: 11612 x 2286 x 2539 mm Outside: 12192 x 2438 x 2891 mm Refrigerator Brand: Carrier = Further Information = General Information Year of Construction: Oct. 2011 Model Year: 2011 Dimensions Dimensions (L x W x H): 1220 x 244 x 289 cm Weight Empty weight: 4,740 kg Payload: 29,260 kg GVW: 34,000 kg Functional Refrigeration: -25 °C to 25 °C Cooling motor: electric (2473 operating hours) Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. Ceb Etxov Um Dtsd Hogt TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: used, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 300 mm Turning length : 480 mm Mainspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):15 kW Torque (max.):100 Nm Barcapacity (max.):51 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Modular Gr. 52 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):15 kW Torque (max.):100 Nm Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 160 Cgjb Etxjv Hvgnsd Hot Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:160/70/510 mm Rapid travers in X/Y/Z:30/15/45 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 4 kW, 16 Nm Movement in X/Z:150/510 mm Rapid travers in X/Z:30/45 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 10 bar Rawmaterialfeed:Barloader, Top Automazioni ETL8-50 Finished-part-removal:Parts handling device with conveyor belt Oilmistseparation:Interface mechanical prepared Further Equipment:Spindle chiller, Rinsing pistol

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: AE700472 Ref: 111810, working width: 1,350 mm, 1350m/m Wide Belt Sander with 3 Sanding Rollers Calibrating and Sanding machine In very good condition. Electronic Control Unit. Capacity 1350m/m wide. Very good HP. With at least 5 boxes of Cloth Backed Sanding Belts 40/60 & 80 Grit. Cgjb Etxdot Iwgue Hst Price of STG £15,000.00 Includes loading buyers transport. Location: Burrowbridge, Somerset TA7 0SG UK Photos available on WhatsApp

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 Cgsb Eswakktetxd Hst 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: excellent (used), DMC Topsand 2000 calibrating and sanding machine 4 Belts First group 1 roller Cgjbsi Dakre Etxd Hjt Second group 1 roller Third group 1 electronic sectioned pad Fourth group 1 electronic sectioned pad super finisher Useful width 1350 Vacuum system on belt

Condition: excellent (used), Year of construction: 2010, color: white, 40FT HC container Reefer engine: Carrier P.T.I. Certificate (Pre-Trip Inspection) Cargoworthy CSC plated (03/2027) Wind-watertight Aluminum T-floor Double refrigerated container doors 380V connection 5-pin -25 to +25 degrees Celsius Inside: 11612 x 2286 x 2539 mm Outside: 12192 x 2438 x 2891 mm Refrigerator Brand: Carrier = Further Information = General Information Year of Construction: April 2010 Model Year: 2010 Dimensions Cob Etxjv S D Haed Hogt Dimensions (L x W x H): 1220 x 244 x 289 cm Weight Empty weight: 4,780 kg Payload: 24,440 kg GVW: 29,220 kg Functional Refrigeration: -25°C to 25°C Cooling motor: electric (1333 operating hours) Condition Technical condition: very good Visual condition: very good

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, spindle speed (max.): 3,500 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, table length: 420 mm, table width: 125 mm, Machine is prepared for automation! Cgeb Etxdev Um A Aj Hot The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm Cebsp Du Alj Etxd Hegt

Year of construction: 2023, Condition: new, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Cgeb Etsiypzljxd Hot Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: good (used), Functionality: fully functional, total length: 2,000 mm, A-trolley L2000xW900xH1700mm 32 pc available Cgob Etxdsvmy H So Hjt

Year of construction: 2005, Condition: ready for operation (used), Control Unit Brand Siemens Model 840 D Cgebsup Iqao Etxd Het Main Drive Spindle speed range 0-5000 Tool taper VDI 30 Number of axis 4 Movement X-Axis Movement 260 mm Y-Axis Movement 80 mm Z-Axis Movement 610 mm Workpiece Workpiece drm 65 mm Tools Slots in storage 12 Media Chip conveyor Yes Additional Equipment Hainbuch collet chuck on main and counter spindle Parts catcher 10 tool holders (2 axial, 2 radial, and 6 normal holders) Emco LM 1200 loading magazine This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information. Application Types Turning

Year of construction: 1990, Condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Csb Etxdeg S Uc De Hsgt Daylight 1150 Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: reconditioned (used), Year of construction: 2016, Automatic 5 m opening 550 mm diameter blades Cgsbov Spx Ie Etxd Hst Electro-pneumatic head tilt from 135° inside to 22.5° outside with mechanical stop for intermediate angles 2500 mm roller table on mobile head 2016 model

Condition: good (used), Year of construction: 1990, - For connection to multi-spindle automatic lathes - Storage: surface magazine 4x 450 mm support - Bar Ø: 4-52 mm (depending on guide channel) - Ø guide channel: 44 mm - bar length: approx. 3000-4200 mm - dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg Ceb Etjihhz Rjxd Hegt

Year of construction: 2022, Condition: new, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Cgeb Ejimwp Sjtxd Hst Machine available on request New machine

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, compressed air connection: 8 bar, total width: 2,000 mm, total length: 3,500 mm, total height: 2,000 mm, input voltage: 380 V, overall weight: 3,500 kg, roll diameter: 1,000 mm, roll width: 1,300 mm, Slitter rewinder 1300mm Production year 2023 Max material width 1300mm Min material width 50mm Max dia.unwind 800mm Max dia rewind 1000mm Cgeb Eov Rwwpotxd Hst Slitting shear & razor knives

Year of construction: 2002, Condition: ready for operation (used), A vertical panel saw GMC including a small and mobile extraction unit Kemper is available. Cutting dimensions X/Y/Z: 4200mm/2100mm/50mm, max. horizontal cutting height: 1950mm, saw blade outer diameter min./max.: 240/250mm, saw blade inner diameter: 20mm, saw blade speed: 5200rpm, motor power: 3kW, weight: approx. 500kg. Extraction unit Kemper 64100, year of manufacture: 2009, volume flow: 1200m³/h, weight: approx. 80kg. Documentation available. On-site inspection is possible. Ceb Etjv Sufmoxd Hjgt

Year of construction: 2023, Condition: new, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Cgobsfh R Nyj Etxd Hjt Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010

Year of construction: 2006, Condition: like new (used), Built in 2006 Cgsb Eod Hr Ncjtxd Het Condition like new!

Year of construction: 1999, Condition: used, 0 1200 °C internal diameter 210 mm internal length of the oven 1000 mm total power requirement 25,2 kW weight of the machine ca. 0,55 t dimensions of the machine ca. BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace Cob Eteui T Dloxd Hjgt GAS H2 und N2

Condition: excellent (used), Here we offer you an Omron SCARA industrial robot. Omron SCARA Industrial Robot with PB Programming Box R6Y XGL400 XG Series SCARA robots for industrial applications: - Higher reliability (no belts on XG series, no moving electronic parts). - High precision and speed - Minimal maintenance - Ease of use - High rigidity - Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. Payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/-0.01 mm R: +/-0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Cjb Etxdsh H D Rts Hjgt Rotation angle X-axis +/-140 º Y-axis +/-144 ° Z-axis -- ° R-axis +/-360 ° Type: R6Y XGL400150 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.