Used Mc Cormick Mtx 145 for sale (6,764)

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 Celeu Tqb Uen Hca Eegt - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: excellent (used), Year of construction: 2022, Plate length - 2100 mm Plate width 1100 mm Press opening - 250 mm Pressure force - 90 t Number of cylinders - 6 Max working temperature - 120 °C Cylinder diameter70 mm Celn Hcjwgl A Roa Eogt Heating plates Thermal oil Press with pistons at the bottom Side pressure cylinder - 4 Total connection power - 21 kW Excellent technical condition

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, Cjln Hcjwd E N Ssa Eogt driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Year of construction: 1986, Condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm Coln Hsd H Ur Aoca Esgt - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Condition: good (used), Year of construction: 2007, machine/vehicle number: R2EV3502, TECHNICAL DETAILS Swing over bed: 430 mm Swing over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 – 6300 rpm Spindle torque: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Drive power: 13 kW Rotary axis resolution: 0.001° Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Number of tool positions: 12 Shaft according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Cgeln Hewfdb Nsca Eet Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Speed range: 0 – 5,000 rpm Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4,000 / 6,000 N Acceleration time: 0.1 s Positioning spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1,152 mm Height of the machine: 1,940 mm Footprint: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system tank volume: 230 liters Pump power: 0.57 kW

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings CE mark Cgoln Hswdwiqjca Ejt Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall Csln Hswag Stsca Eogt >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: V4AY3601, feed length X-axis: 200 mm, feed length Z-axis: 400 mm, controller model: Sinumerik 828 D, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Siemens Sinumerik 828 D Z-axis travel: approx. 400 mm X-axis travel: approx. 200 mm Celn Hjwd R R Isca Esgt MACHINE DETAILS Dimensions: 4,000 x 2,400 x 2,300 mm Weight: 5 t Operating voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 46 A EQUIPMENT - C-axis included - Chip conveyor included - Conveyor and loading system from EWAB

Condition: good (used), Year of construction: 2004, Emco ET 420 / double spindle lathe, Year of manufacture 2004, Siemens control, max. bar capacity 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, double bar loading magazine, main spindle up to 5,000 rpm, Cgsljr Izbyon Hca Eot C axis 0.01° , Revolver 2 x 12-fold VDI 16, 4 driven tool stations / turret, chip conveyor, coolant device, parts catcher long parts ( self-made )

Condition: used, Year of construction: 2010, x-travel 0450 mm y-travel 350 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO 40 spindle turning speed range 10- 5000 U/min Cslev Anlbsn Hca Eogt feeds 10- 5000 mm/min rapid traverse 5 m/min total power requirement 10 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5 x 2 x 2 m Machine has a EMCO easy cycle positioning control and many accessories.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: R2AP3901, CNC Lathe Manufacturer: EMCO Type: EMCOTURN 345-II Year of manufacture: 2003 Center height: 1160 mm Center distance: 700 mm Max. turning length: 510 mm Max. swing over bed: 430 mm Max. swing over cross slide: 210 mm Max. workpiece weight: 30 kg Work spindle: Spindle head according to DIN 5026 Size: A5 Spindle diameter in front bearing: 80 mm Spindle bore: 53 mm Max. chuck diameter: 160 mm Bar capacity: 45 mm Max. torque: 78 Nm Cgsln Hcewfda Sea Ejt Support: Tool system DIN 69880 Chisel cross section: 12 x VDI30 Number of bed slides: 1 Number of cross slides: 1 Cross stroke: 100 mm Longitudinal stroke: 310 mm Tailstock: Quill taper: MT4 Quill diameter: 60 mm Main spindle: 1500 rpm Cross axis (X): 3000 rpm Longitudinal axis (Z): 3000 rpm Feed rate: Longitudinal slide min./max.: 0/24000 mm/min Cross slide min./max.: 0/20000 mm/min Rapid traverse: Longitudinal: 24 m/min Cross: 20 m/min For further technical data, see images Control: SIEMENS SINUMERIK 810D With integrated C-axis in the control C-axis (rotary axis): Rotary axis resolution: 0.001 degrees Rapid traverse: 100 rpm Chip conveyor: Manufacturer: KNOLL Total dimensions: 3500 x 2100 x 2500 mm Total weight: approx. 2600 kg

Condition: good (used), total height: 2,590 mm, total length: 6,060 mm, total width: 2,440 mm, Year of construction: 2005, 2005 CIMC tank container 20FT ISO tank container, 25,030L / 1-comp. T11, UN Portable steam heating bottom discharge design temperature: -40/+130 °C 2.5Y+CSC test valid until 08/2026 = Further information = General information Year of manufacture: February 2005 Model year: 2005 Weights Empty weight: 3,800 kg Payload: 32,200 kg GVW: 36,000 kg Cgsln Howdivpeca Est Functional Cargo space capacity: 25,000 l Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: good Visual condition: good Further information Contact Arne Honingh or Piet Swank for further information.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning Cslnewbk Ste Hca Eogt

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Csln Hcewd R Nwsa Ejgt Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck

Condition: used, Year of construction: 2001, Emco Turn 365 MC with counter spindle + chip conveyor (can be inspected under power) Year of manufacture 2001 Bar loader present --> feed cylinder defective Operating hours: read 16,000 Used condition Coln Hcjv I Udnoa Eegt Siemens control system Control cabinet cooling unit Has been inspected Work completed: Main and counter spindle belts checked! Geometry completely measured and adjusted. New drive modules and E/R module Some work is still being done on the machine.

Condition: good (used), Short bar loader magazine LM 1200. Year of manufacture 11/2005. Very good condition – 100% functional. Available immediately. Coln Hcajwfunto Eegt

Condition: good (used), Year of construction: 2007, machine/vehicle number: R2EV3403, TECHNICAL DETAILS Swing over bed: 430 mm Swing over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 – 6300 rpm Spindle torque: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Drive power: 13 kW Rotary axis resolution: 0.001° Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Number of tool positions: 12 Celn Hswfb Utoca Eogt Shaft according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Speed range: 0 – 5,000 rpm Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4,000 / 6,000 N Acceleration time: 0.1 s Positioning spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1,152 mm Height of the machine: 1,940 mm Footprint: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system tank volume: 230 liters Pump power: 0.57 kW

Condition: repair required (used), Year of construction: 1998, For sale here is a cycle-controlled lathe Emco MAT E200! The machine has a control defect and does not start! Cjlou U Nk Dsn Hca Eogt For further questions I am at your disposal

Year of construction: 2011, Condition: excellent (used), Traverse For lifting glass packages Maximum lifting capacity: 6000 kg Crane mounting Cslop U Ua Ren Hca Eegt In very good and clean condition Available immediately

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weighing scale Hopper: 2 litres Cgjlnov S Iywj Hca Est Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g Stores 800 different dosing recipes Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct Materials in contact with the ingredient : 304L electro-polished stainless steel. GMP-compliant construction Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced New main drive module Cjlsv I Uavon Hca Eogt + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: good (used), Code: 0037 Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Cjln Hcsv Ab Dwoa Eogt Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood from both sides Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3701, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Csln Hcaowfb S Ee Ejgt Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Cgsln Hjv A Ta Dsca Eot Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3602, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Cgjln Hswd Uudoca Est Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m