Used Mc Cormick Mtx 145 for sale (6,765)

Condition: good (used), Year of construction: 2019, Functionality: fully functional, We request your binding offer. • Machine is functional, assembled, and can also be tested. • For mailings, newspapers, etc. • CMC A15p • CMC A14p - Servo • CMC DEFA • CMC A14p • CMC C2e • CMC R3 • CMC PracticaEVO • CMC RA20_z Cebjv Iy Sds Hc I A Tegt Available from: immediately Delivery terms: ex works – EXW (Brandenburg) Payment terms: Payment before pickup Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Code: 0267 Brand: SAMCO Model: RP/2 Cgebotdgiao Hc I A Tst Automatic bevelling machine for wooden shutter pallets Bilateral bevelling of blind slats Max workpiece size mm 750 Min workpiece size mm 140 Operating speed approx 1800 slats/hour Working pressure 8 kg/cm2 Slats loader Weight kg 170

Condition: new, - 2 speeds - Miter - Hydraulically adjustable cutting pressure - Quick clamping clamp - Cooling system Cjb Hort Rp Hoc I A Togt - Automatic output - Saw blade 2455 x 0.9 x 27 mm - Emergency stop - Documentation - 400V

Condition: good (used), 2 x JBT FMC Foodtech autoclave / retorts in nice condition with upgraded controls. Have come direct from a European pate producer. Single door, 1.4m diameter 4 trolley capacity, 6790 litres. Two identical machines and we also have a 6 trolley version A146 from the same factory. Csberzbdxe Hc I A Togt

Condition: excellent (used), Functionality: fully functional, Year of construction: 2022, operating hours: 1,500 h, total length: 550 mm, electricity and water connection in the basket Cgob Hc Isv H Rk Ue A Tjt

Condition: excellent (used), Year of construction: 2012, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO tank container 25,010L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes, UN PORTABLE, T11 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+140 degrees valid 2.5Y- + CSC inspection until 01-2027 = More information = General information Year of construction: May 2012 Model year: 2012 Usable material: Chemicals Cob Hc I Ajut Nxto Tegt Weights Empty weight: 3,950 kg Payload: 32,050 kg GVW: 36,000 kg Functional Load space capacity: 25,000 l Building brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Optical condition: very good More information Contact Arne Honingh for more information.

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs Cebou Ixw As Hc I A Tegt *

Condition: used, Year of construction: 1994, Functionality: fully functional, machine/vehicle number: SA002264, working width: 1,300 mm, working height: 160 mm, power: 18 kW (24.47 HP), height adjustment type: electric, type of input current: three-phase, table height adjustment: 160 mm, input frequency: 50 Hz, input voltage: 380 V, frequency: 50 Hz, DMC EUROPA 130 Calibrating Sander Cob Hev Ia E Roc I A Tsgt Powerful machine, requires sanding the carpet for grip

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, Functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Cgjb Hc I Asv Iqm Ss Tet Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: excellent (used), Year of construction: 2012, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO tank container 25,090L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes, UN PORTABLE, T11 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+140 degrees valid 2.5Y- + CSC inspection until 11-2026 = More information = General information Year of construction: May 2012 Model year: 2012 Usable material: Chemicals Weights Empty weight: 3,950 kg Payload: 32,050 kg GVW: 36,000 kg Functional Csbjut Ntds Hc I A Tegt Load space capacity: 25,000 l Building brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Optical condition: very good More information Contact Arne Honingh for more information.

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, Functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Cgsb Hc I Ajv Iqlzo Tet Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: new, Year of construction: 2022, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, NEW / UNUSED CIMC tank container, BOTH FOODSTUFF/CHEMICAL USE 20FT ISO tank container 25,030L / 1-compartment L4BN T11, UN PORTABLE steam heating bottom discharge design temperature: -40-/+130°C valid 2.5T- + CSC-test: 01/2027 more pieces available = Further information = General information Year of manufacture: Jan. 2021 Model year: 2022 Weights Empty weight: 3,600 kg Payload: 32,400 kg GVW: 36,000 kg Functional Content of the cargo space: 25,000 l Brand of the body: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of chambers: 1 Ceb Hjuumtqjc I A Tjgt Condition General condition: very good Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Cgsb Hc I Aev Iqbcs Tot Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: excellent (used), Year of construction: 2012, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO tank container 25,070L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes, UN PORTABLE, T11 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+130 degrees valid 2.5Y inspection until 01-2027 = More information = General information Year of construction: May 2012 Model year: 2012 Usable material: Chemicals Weights Empty weight: 3,950 kg Cebsuui Scj Hc I A Togt Payload: 32,050 kg GVW: 36,000 kg Functional Load space capacity: 25,000 l Building brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Cgjb Hcsv Ip Izj I A Tjt Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: excellent (used), Year of construction: 2012, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO tank container 25,090L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes UN PORTABLE, T11 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+130 degrees valid 2.5Y- + CSC inspection until 10-2026 = More information = General information Year of construction: May 2012 Model year: 2012 Cob Hc I Asut Nnbo Tegt Weights Empty weight: 3,950 kg Payload: 32,050 kg GVW: 36,000 kg Functional Load space capacity: 25,000 l Brand of body: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Visual condition: very good More information Contact Arne Honingh for more information.

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Cjb Hcov Ip Ale I A Togt Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: new, Year of construction: 2021, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, UNUSED CIMC tank container, BOTH FOODSTUFF/CHEMICAL USE 20FT ISO tank container 25,000L / 1-compartment L4BN T11, UN PORTABLE steam heating bottom discharge design temperature: -40-/+130°C valid 2.5T- + CSC-test: 12/2026 more pieces available = Further information = General information Year of manufacture: Dec. 2021 Model year: 2021 Weights Empty weight: 3,600 kg Payload: 32,400 kg Cjb Hc I Ajuumz Ue Tegt GVW: 36,000 kg Functional Content of the cargo space: 25,000 l Brand of the body: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of Chambers: 1 Condition General condition: very good Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2011, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 6BE1AZ2661, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, swivel angle A-axis (min.): -100 °, swivel angle A-axis (max.): 100 °, The machine was used for training purposes and has only approximately 400 spindle hours. TECHNICAL DETAILS X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis swivel range: ± 100° A/B-axis speed: 22 / 16 rpm X/Y/Z rapid traverse: 24 m/min Control: Heidenhain TNC 426 Mill Worktable Clamping area: 700 x 520 mm Tolerance: 5 T-slots with 18 mm Load capacity: 500 kg Spindle Speed range: 50 - 12,000 rpm Drive power: 11 kW Tool changer Tool magazine: 20-station Change mechanism: Automatic double-arm quick changer with Tool length adjustment device Tool holder: SK 40 with directional logic (DIN 69871) Tool diameter: 80 / 125 mm Tool length: 250 mm Tool weight: 8 kg MACHINE DETAILS Spindle hours: approx. 400 h Dimensions: 2,040 x 2,445 x 2,920 mm Weight: 4 t Air pressure: 6 bar EQUIPMENT - Win3D View simulation - 5th-axis rotary swivel unit, built in 2013 - Electronic handwheel - Coolant system (internal coolant supply possible) - Comprehensive tool set for operation - Tool cabinet with 66 tool holders - Center-clamp vise and three-jaw chuck - Tool blow-out device - Cover including chip protection door Cob Hc Iev Ipnho A Tegt - Leveling elements - 3 pieces

Condition: excellent (used), Year of construction: 2012, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO tank container Cgeb Hc I Aeut Nyqs Tot 25,100L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes, UN PORTABLE, T11 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+140 degrees valid 2.5Y- + CSC inspection until 02-2025 = More information = General information Year of construction: Apr. 2012 Model year: 2012 Usable material: Chemicals Weights Empty weight: 3,950 kg Payload: 32,050 kg GVW: 36,000 kg Functional Load space capacity: 25,000 l Building brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Optical condition: very good More information Contact Arne Honingh for more information.

Condition: like new (used), Year of construction: 2016, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: A6D160702, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, turning diameter over bed slide: 130 mm, bar passage: 15 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 180 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Cjb Hc I Ajv Ipbue Tjgt Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: 180 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Optical tool presetter - Tailstock - Pneumatic chuck - Automatic door - I/O expansion board for robotics and DNC interface

Condition: new, Year of construction: 2022, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, UNUSED CIMC tank container, BOTH FOODSTUFF/CHEMICAL USE 20FT ISO tank container 25,000L / 1-compartment L4BN T11, UN PORTABLE steam heating bottom discharge design temperature: -40-/+130°C valid 2.5T- + CSC-test: 01/2027 more pieces available = Further information = General information Year of manufacture: Jan. 2021 Model year: 2022 Weights Ceb Hc I Aeuuqbxe Tjgt Empty weight: 3,600 kg Payload: 32,400 kg GVW: 36,000 kg Functional Content of the cargo space: 25,000 l Brand of the body: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of Chambers: 1 Condition General condition: very good Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation Cgob Hcjv In Nko I A Tst - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: new, Year of construction: 2021, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, UNUSED CIMC tank container, BOTH FOODSTUFF/CHEMICAL USE 20FT ISO tank container 25,000L / 1-compartment L4BN Cgsbsuum Are Hc I A Tjt T11, UN PORTABLE steam heating bottom discharge design temperature: -40-/+130°C valid 2.5T- + CSC-test: 12/2026 more pieces available = Further information = General information Year of manufacture: Dec. 2021 Model year: 2021 Weights Empty weight: 3,600 kg Payload: 32,400 kg GVW: 36,000 kg Functional Content of the cargo space: 25,000 l Brand of the body: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of Chambers: 1 Condition General condition: very good Technical condition: very good Optical condition: very good

Condition: excellent (used), total height: 2,590 mm, total length: 6,060 mm, total width: 2,440 mm, Year of construction: 2012, 2012 CIMC 20FT ISO tank container 25,090L / 1-comp. with 3 baffles (partial loading possible)/ 4 manholes, UN PORTABLE, T12 steam heating bottom discharge Payload: 32,050kg Design temp: -40/+140 degrees valid 2.5Y- + CSC inspection until 12-2026 = More information = Cgsb Hc Isvrh Die A Tot General information Year of construction: May 2012 Model year: 2012 Usable material: Chemicals Weights Empty weight: 3,950 kg Payload: 32,050 kg GVW: 36,000 kg Functional Load space capacity: 25,000 l Building brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Optical condition: very good