Used Weiler Commodor 80 Cnc for sale (166)

Condition: used, Year of construction: 1986, Technical details: Bwolqysthun Iex Nhsl turning diameter: 160 mm turning length: 500 mm weight of the machine ca.: 4 t This machine comes from a training workshop. Technically, the machine is fully functional and in a well-maintained condition. *

Condition: excellent (used), Year of construction: 2014, operating hours: 7,690 h, Functionality: fully functional, turning diameter over cross slide: 207 mm, turning length: 530 mm, turning diameter: 240 mm, spindle speed (max.): 5,000 rpm, A CNC lathe of the Weiler brand and type DZ 65 is for sale. The machine has 12 driven tool stations and is in very good condition with low operating hours Technical data: Year of manufacture: 2014 Control system: Siemens 840D SL Operating hours: 7,690 h Bed arrangement: 45 ° inclined bed Bwolouxc Tcsqyx Nhol Working spindle center over floor: 1130 mm Face path X: 207.5 mm End face mounting center point: 745 mm Working path Z_ 530 mm Turning diameter: 240 mm Rated power at 1000 rpm: 27 kW Speed range: 50-5000 1/min Torque: 260 NM max chuck size: 200 mm Spindle bore: 77 mm Spindle diameter in front bearing: 120 mm Material passage in the pressure tube: 65 mm Tailstock NC-controlled Holder for center punch: MK 4 Power: 4 MK Torque: 9.5 NM Longitudinal travel: 525 mm Z-axis travel: 530 mm X-axis travel: 207.5 mm Z-axis rapid traverse: 30 m/min X-axis rapid traverse: 30 m/min Number of tools: 12 Tool shank cross-section: 20*20 mm Tool holder: VDI 30 Dimensions: 3180 mm*2050 mm * 2200 mm Weight: 6300 kg Further information: - Bar feeder hardware prepared but must be enabled - Only chip tray supplied, chip conveyor available from Weiler - Belt skimmer equipped - Offer does not include tool holders and collets, but can be included in the offer On request, transportation and loading can be organized for an extra charge. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1989, turning diameter over bed 380 mm turning diameter over slide rest 190 mm turning length 1000 mm total power requirement 7,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5*1*1,5 m No. 5291 1 used lead and feed spindle lathe WEILER Commodor 75 GS working range: Ø 380/190 x 1000 mm drive: 7,5 kW Bwelqjuyni Esyx Nhol digital display spindle bore 56 mm Speed range 13 - 2000 min-1 3-jaw chuck Multifix B Chip tray documentation Space requirement approx. 2.5 x 1 x 1.5 Weight approx. 1700 kg

Condition: used, Year of construction: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - rotating center point MK5 - Mulifix B quick-change holder incl. 10 tool holders - Switch-on time 32582 h - Year of manufacture 1997 - incl. operating instructions and technical documentation Technical data: Working range: - Tip width: 1000 mm - Center height: 280 mm - Circumferential diameter over bed: 570 mm - Circumferential diameter over facing slide: 340 mm - Bed width: 350 mm - Movement of the facing slide: 340 mm - Movement of the top support: 140 mm - Slide gate length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning tool cross-section (height/width): 32 x 25 mm Turning spindle: - Spindle head according to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Inner taper of the main spindle: metr. 70 Main drive: - Drive power 60% / 100% ED: 15 / 11 kW - Max. Torque at the turning spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gear stage I: 1 - 625 rpm - Speed range gear stage II: 4 - 2500 rpm Feed drive: - Type: Three-phase servo drives Bwoler Hrq Djqyx Nhel - Feed range longitudinal and planar: 0 - 10 mm/rev - Feed force longitudinal: 9000 N - Feed force planar: 7000 N - Input speed longitudinal/plane: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Inner taper of the quill: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch thread: 1/4 - 56 G/1" - Module thread: 0.125 - 28 - DP thread: 1 - 224 Machine dimensions: - Dimensions WxHxD: 2850 x 1750 x 1815 mm - Weight of the machine: 2950 kg

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Bwolqyxothd Sho Nhjl Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Year of construction: 2022, Functionality: fully functional, turning length: 500 mm, turning diameter: 240 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 530 mm, Equipment: documentation/manual, Numerically controlled turning center Weiler DZ 45 CNC / ARY with Siemens Sinumerik control system 840D sl Bslqyx Njum R Ebehowl The CNC precision lathe from Weiler for the highly productive area in production, toolmaking, research institutes and much more, toolmaking, research institutes and much more. High-quality, energy-efficient, precise and very versatile. Turning diameter 240 mm Turning length approx. 500 mm Bar capacity 42 mm Main drive with 21.5 kW Powerful axis drives Suitable for chuck, bar and shaft machining Y-axis for machining complex workpieces Counter spindle Up to 16 driven tools Complete machining of workpieces in one clamping operation High rapid traverse speeds High accuracy due to direct path measuring system Wide range of applications Integrated safety function in all axes LED machine light This offer is subject to change and non-binding. Subject to alterations, errors and prior sale. Thank you for your information, payment has already been received.

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm Bwelqyx Nsvd Dbnshol spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, center height: 180 mm, turning length: 1,000 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 35 rpm, overall weight: 1,200 kg, quill mount: MK 4, Weiler DA 180 with accessories Bwelqev T Rw Ueyx Nhel Spindle mount: KK6 Accessories: Electronic spindle protection Haidenheim 3-axis digital display Operating manual 3 Multifix Centering centers Drill chuck Various turning tools Machine light Machine feet Forkardt 200F key bar chuck with interchangeable base jaws and hard top jaws Stripper NEW Spindle nut for top slide NEW Change gear NEW Oil change

Condition: used, L + Z lathe WEILER type Praktikant 800R Machine no. No. 2997 Year of construction 1982 Center distance 800 mm Turning diameter over bed 280 mm Bwoljupbfqeqyx Nhel Turning diameter over support 160 mm Center height above bed 140 mm Center height above support 80 mm Spindle bore 36 mm Feed lengthwise and flat Chuck holder short taper DIN 55027 size 5 4x M10 Inner tailstock taper MK 3 Pinol adjustment 90 mm Spindle speed 42 - 2000 rpm Drive power 0.8 / 1.6 kW Mains connection 380 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Spindle speed via 2 motor speeds and 8 gear stages - 3-jaw wedge bar lathe chuck BISON Ø 165 mm with 1 set of hard chuck jaws for turning - 1 set of base jaws with soft top jaws - Quick-change steel holder MULTIFIX size A with 3 interchangeable cassettes - rotating center point - Emergency stop - Folding chuck guard - Splash guard - without coolant device (electrically pre-equipped) Space requirement L x W x H 1800 x 800 x 1750 mm weight 600 kg good condition

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key Belsvt Ecljqyx Nhewl - machine base with storage area - pole-changing drive motor - operating instructions

Condition: excellent (used), Year of construction: 1979, Manufacturer Weiler type Commador II L+Z Lathe year of construction: 1979 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approx. 1500 kg Technical data: Max. Turning diameter over bed: approx. Ø 380 mm Max. Turning diameter over support: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar passage: approx. Ø 56 mm Spindle: Speed range: approx. 25 - 2000 rpm spindle nose: A 2 - 6 Drive power: approx. 4,0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.026 - 1.253 mm/rev. Suitable for threads: - metric 0.35 - 12 mm - inch 44 - 2 Gg/" - diametrical - pitch thread 88 - 5 Dp Bolqyxolp Irce Nhjwl - Module 0,2 - 4 Tailstock: MK 4 Without tool holder

Condition: good (used), Functionality: fully functional, The machine is in very good and tidy condition. An emergency stop switch was subsequently installed for safety reasons. Bwelqyxov Di Rze Nhol The machine can be inspected on site and tested on request.

Condition: used, Year of construction: 1989, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm spindle bore 36 mm Belqyx Nordwfzjhswl turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used!

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm Bwelswgi Tmeqyx Nhol turning length / mm

Condition: used, machine/vehicle number: 1717, second-hand WEILER PRAKTIKANT sliding headstock and sliding headstock lathe center height 140mm center distance: 500mm spindle diameter: 36mm spindle speeds from 42-2,000 rpm Belqeuqb Emsyx Nhewl with RSF 3-axis digital readout chuck protection electrically fused with Multifix steel holder head size A with 3 inserts Lever collet device with 15 collets. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret 3-jaw RÖHM chuck, Ø 200 mm Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Bwolqyx Nswfm Tbjhsl Chip collection tray 5 height-adjustable machine mounts Operating manual

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 20 h, Functionality: fully functional, Weiler Praktikant VCD lathe, as good as new, built in 2018, with a 3-axis digital display, three-jaw chuck, collet chuck, Multifix, and chuck guard. Weight approx. 1000 kg. Machine in as good as new condition, exhibition machine. CE compliant. Bjlqyx Njwg E H Aohowl

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse Belju E H Iwjqyx Nhewl

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Universal Lathe - cycle controled / Brand: WEILER / Type: E35 D Year of construction: 2002 (Start-up: November 2002) Operating hours: 53.083 h The machine can be inspected by appointment. TECHNICAL DATA: - Control: Siemens 810D, Weiler D2 (cycle control) Working area: - Center height: 200 mm - Center distance: 950 mm - Turning length max.: 950 mm - Swing diameter over bed max.: 410 mm - Swing over cross slide max.: 200 mm - Swing diameter in the crank: 440 mm - Length of crank in front of faceplate: 200 mm - Workpiece weight max.: 900 kg Working spindle: - Spindle head according to DIN: 55027 - Size: 6, Inner cone: MK 6 - Spindle diameter in the front bearing: 90 mm - Spindle bore: 54 mm - Diameter of the faceplate: 355 mm - Chuck diameter max.: 250 mm - Torque max.: 700 Nm Support: - Tool system: Parat - Chisel cross section: 25 x 25 mm - Number of bed slides: 1 - Number of cross slides: 1 - Lengthwise stroke: 950 mm - Flat stroke: 230 mm Tailstock: - Quill cone: MK 4 - Quill diameter: 65 mm - Hydraulic quill stroke max.: 120 mm - Manual tailstock displacement max.: 950 mm Feed rate: - Longitudinal slide min/max: 0,001 - 20 mm/U - Cross slide min/max: 0,001 - 20 mm/U - Rapid traverse: longitudinal 10 m/min, plan 5 m/min - Feed force: longitudinal/transverse 8.000/5.000 N Bolqyxswctmio Nhjwl Thread pitches min / max: - Metric 0,1 / 250 Pitch in mm Withworth 1/4 / 56 Gears/Inch Module 0,125 / 28 Slope in module Spindle speed: - Gear stage I: 1 up to 750 rpm II: 4 up to 3.000 rpm - Continuously: 1 up to 3.000 rpm Max. performance achieved with I/II: 150 rpm (100% ED)/ 600 rpm (100% ED) Machining values for 60 pcs.: - Chip cross section: 1,4 mm², at cutting speed 120 m/min Fuel type: - Normal coolant: 30 dm³/min, 0,4 bar - Coolant reinforced: 30 dm³/min, 3,5 bar - Machine weight: 2,1 tons - Total connection value: 10 kW - Total power requirement: 12 kVA - Operating voltage: 400 V, frequency: 50 Hz Machine dimensions: - Length/Width/Height: 2,3 x 1,4 x 1,7 m ACCESSORIES/EQUIPMENT: - Various accessories - 1 pc. Machine tray - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: excellent (used), I am selling a Weiler Primus, which is in very good condition. It has been used very rarely over the past few years and exclusively for plastic machining. The machine is equipped with a digital measuring system on 3 axes and is fully functional. Bwolqyxowg Exxs Nhel No VAT will be added to the sale price.

Condition: good (used), Functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Nominal current: 25 A - Frequency: 50 Hz Equipment: Bwolqyxjv Irgtj Nhel - Tailstock - Multifix type B tool holder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Bwslqyx Njwb Supehsl Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; Belqyxowa Dz Ee Nhjwl collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Bwelqoukrtnsyx Nhol Dimensions: 1600mm x 600mm x 1250mm Weight: 850 kg

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Bslqyx Njwbpqbohowl Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024