Used Knikmops Km100 Te for sale (135,488)

Year of construction: 2016, Condition: ready for operation (used), Load capacity: 350kg, jib length: 6500mm, slewing range: 210°, weight: approx. 240kg, operating pressure: 7bar. Documentation available. An on-site inspection is possible. Fsbvowg E A Denmi Sogb

Condition: excellent (used), Year of construction: 2016, operating hours: 2,950 h, machine/vehicle number: 151000004909, Machine installed end of 2015, used ocasionally for kitchen countertops. Magazine for apx 40 tools, Agregate for diamond disc, cones and tools included, Working 2950h spindle (8700h switche ON). Fgebvnjm Aldksmi Seb

Condition: ready for operation (used), machine/vehicle number: EN613262978018041147, Condition Used Stock Number 50585 This listing is for a Thermo Fisher Scientific Applied Biosystems ProFlex TM Base Fsbvnsv R Rh Uemi Sjgb The unit is in full working condition and is ready for immediate release The Applied Biosystems ProFlex PCR System is the latest in the line of Applied Biosystems thermal cyclers. The ProFlex 96-well PCR System offers the following features:

Condition: excellent (used), Functionality: fully functional, Year of construction: 2004, operating hours: 6,089 h, load capacity: 5,500 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Perkins, gearing type: automatic, fork length: 1,200 mm, tire condition: 70 %, front tire size: 300x15, rear tire size: 7,00-12, overall weight: 7,980 kg, empty load weight: 5,500 kg, total height: 2,850 mm, total length: 3,300 mm, total width: 1,400 mm, maximum load weight: 5,000 kg, fuel: diesel, Equipment: lighting, pallet forks, sideshift, Forkpositioner // Full cabin We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English between 9.00 and 21.00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp in French language from 9:00 to 21:00. ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. Fgjbvjwh Axrenmi Ssb The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: used, • W = 2500 mm • D = 4000 mm • H = 2950 mm • Max. glass dimensions • L = 3600 mm • H = 2200 mm • 10 drawers • Glass shelves 150 mm each • 2 units with drawers available • 1 unit without drawer • Disassembled 2 units Fgjbewc Sxwsvnmi Sjb

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 25 h, Functionality: fully functional, total height: 3,850 mm, total width: 2,060 mm, total length: 4,680 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,800 kg, power: 4 kW (5.44 HP), The TUKSTON Stone Trap was developed to offer cost-effective removal of foreign matter. The inclination, speed, and feed area can be continuously adjusted to achieve optimal separation efficiency. Simply combine your existing screening machine with TUKSTON and TUKWIND and separate foreign matter such as metals, stones, and plastic. The screening machine remains completely mobile and can therefore be easily moved for cleaning. Febvnmiewhkrto Sjgb Easy separation of: - Rollable foreign matter (stones) - Ferrous metals (optional magnetic roller with 2-20 kg pulling force) - Lightweight materials such as plastic film, wood chips, hard plastic, Styrofoam, etc. (optional TUKWIND wind sifter) A 16A CEE power connection with only 4 kW power is required for operation!

Condition: used, Year of construction: 2008, total length: 2,900 mm, total height: 1,370 mm, total width: 750 mm, Weight: 610 kg - Year: 2008 Fgjbvnmowbkg Dei Ssb - Documentation available: No - CE mark available: Yes - Serial number: 11-E-1670 - Voltage [V]: 400 - Transport dimensions: 2900mm x 750mm x 1370mm (l x w x h) - Transport weight [kg]: 610kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2021, operating hours: 3,100 h, Field of application: Construction Serial number: 0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20053 Fgebvov U Sdlsnmi Sjb 3,100 hours The machine is registered in the machine register and is approved. On gold agreement since new Makin 3D GPS Makin rototilt with pinch Root beam roof Light package around machine Good sanding bucket Good excavator bucket, missing pictures Extra hydr. Led bar Rear view camera Hk mount 17,400 kg 90 KW Good chassis Central grease Cat engine Webasto Lever-operated tilt steering Crack in windshield being repaired Ready for delivery   Great machine that is ready for delivery. It comes with a lot of equipment, including Makin 3D GPS, Makin rototilt with clamp, sanding bucket and digging bucket. On a gold deal. Few hours and it shows on the machine. Ready for delivery. Hours: 3100 Total Weight: 17400 Kw: 90

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, Coating system for optical production. The plasma source and cryopump were repaired and serviced. Fsbvnmjuf Ni Uoi Sogb

Condition: used, Year of construction: 2007, operating hours: 16,000 h, Equipment: all wheel drive, ATLAS-TEREX TW130 mobile excavator (self-propelled work machine) ALL-WHEEL Year of manufacture: 2007 Type: TW130 Vehicle identification number: 145M301957 Maximum speed: 20 km/h Fgobvnmijvmuqlj Ssb Power: 67 kW Total weight: 16 t Own weight: 14220 kg Length: 6500 mm Width: 2500 mm Height: 4000 mm Driven axles: 2/2 We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved.

Condition: ready for operation (used), Machine number: 56027 Fobvnmieh Ehpto Segb

Condition: ready for operation (used), Year of construction: 2015, This is an used chiller with a nominal cooling capacity ~430kW. R134A refrigerant. This unit has a built-in pump, factory expansion vessel and Bitzer compressor inverter driven technology. Unit in a good condition from our rental machine park. Transport not included. Fgebvnmisix Adbe Sob

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Walter, face milling cutter head Febvnmowbn Ewoi Sogb -Type: WA ER 06 Ø315 mm -Hole: Ø 60 mm -Dimensions: Ø 335 x 110 mm -Weight: 33.7 kg

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. Fobvouu Ntgenmi Sjgb - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Fsbegl Nlmjvnmi Sogb Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2015, F45 2015 Sliding Table Saw F45 ElmoDrive Eye-level operation Template holder Max. blade diameter 450 mm Motor 5.5 kW (7.5 HP) VARIO 3-axis scoring unit with tilting Double-sliding table with a carriage length of 3000 mm TPL 840 mm CNC angle stop UNO 90 CNC parallel stop 1000 mm Collet set (2 pcs.) Fobjwcpuvjvnmi Ssgb

Year of construction: 1997, Condition: good (used), Functionality: fully functional, Napkin production machine Servotec servoflex 800A with automatic transfer; machine number: 89.812; year of construction: 1997; 2-color units; embossing, calendering unit, hot air drying; automatic transfer from SDF year 2005, lift-controlled stacking; ¼ and 1/8 fold + pocket fold; 2-fold embossing chair (installed steel/steel 33 format); format range 30 - 42 cm Behind the machine is a foil wrapping machine from Ilsemann (NW 6), both machines can also be purchased as a package. !No sale within Europe! Fobvnmjt H Itcoi Sogb

Condition: used, Year of construction: 2010, Double Belt Sander Holytek PW 12 H Year of construction 2010 OscillatingMin/max working width 180/1200mm Min/max working thickness 10/250mm Sanding belt size 3730x270mm 2x Engine 7.5 HP Machine dimensions 2500x2250x1700mm, weight 1500kg - Year: 2010 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Febowbgdljvnmi Sjgb Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Fgobvsmrxznsnmi Ssb Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: excellent (used), Year of construction: 2002, ANTER 800 year 2002 – serial Nº 576/632 straightline boxes, lockbottom boxes, 4 corner boxes Max. size: 800mm; min. size: 106mm Max. length box: 650mm, min. Length box: 60mm Material: cardboard from 200gr/m2 up to 600gr/m2 Speed: Up to 350m/min. Fgobvowb Ur Rsnmi Sob Cold glueing unit PAFRA with 2 guns Semiautomatic packer VESTAPACK year 2001, nº 507

Condition: used, Year of construction: 1991, Functionality: fully functional, Schlötter Galvanotechnik Anodizing line with 41 stations Model: PSF2510 Year of manufacture: 1991 Data: Power supply: 3x380 V, 50 Hz with loadable neutral conductor Compressed air: approx. 6 bar Heating medium: hot water 118/105 degrees Size: 41 stations Type of construction: 1-lane transfer system with loading and unloading station on one end side Goods window: 3000x900x300mm Maximum current consumption per goods carrier: 3000 Ampere Machinery and equipment: Anodizing line with 41 stations Control cabinet, modernization of the control system 2008 Cooling system for anodizing baths, modernization 2010 Rectifier for anodizing baths Fgobvolc Evwjnmi Sob Compressor for air injection into rinsing baths AVA, waste water pretreatment plant, modernization Dec 2019 Fresh water treatment plant, new construction Dec 2019

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, working width: 2,050 mm, We sell automatic mini Sloter machine for making cardboard boxes Max sheet size 2000 x 1000mm Max box width 500 mm Min box width 110 mm The machine has an automatic feeder table Types of cardboard used e,b,c,eb,bc... Year of production 2014 Fjbvjv I R Amjnmi Segb Max speed 3000 pcs / hour The machine is in excellent condition and can be seen in operation We can organize transport within Europe and make an offer with transport included if there is interest

Condition: good (used), Suitable for products with width from 20 to 400 mm x minimum 75 mm long x maximum 200 mm high Fgobvnsh Ht Szjmi Ssb

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, We are selling a cleaning machine due to new acquisition. Machine was used by us to clean print sleeves with an outer diameter of up to 150mm Brush width washing area 1800mm Fgebjrlkc Iovnmi Seb

Condition: used, Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 89.282, Napkin production machine; year of manufacture: 1993, manual delivery: 2014; machine number: 89.282; 6 complete inking units, 8 available; IR drying (newer model installed by Servotec); embossing 33 steel/steel; formats manual delivery: 33-42cm ¼ fold folding head installed or 1/8 fold - automatic transfer: 25-33 cm ¼ fold; satinizing unit; drying drum; A Senning packaging machine is connected behind the automatic transfer, the following format sets are available: 30mm and 70mm height, suction belts and guides can be moved to any width. Fsbvjungh Ienmi Segb