Used Knikmops Km100 Te for sale (136,042)

Condition: used, machine/vehicle number: 13009, Rotor diameter: 600 mm Rotor width: 1200 mm Dcjlnswbwt Dj Twqbsg Rotor blade: 3x4 Stator knives: 2 Inlet cross-section approx. 1200 x 600 mm Drive motor: 75 kW

Condition: as good as new (ex-display), Year of construction: 2023, DTF printer SubliTech super booster 2.0 with 2 Epson heads! Including shaker dryer inkset and media. Must go, pick up price and condition is as new! Dceljufya Ren Twqbjg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,800 h, Briquetting machine model A6 Plus Motor: 7,5 kW Installed power: 7.5 kW Voltage 380 V Drum size Ø 1000 mm h 920 mm Maximum material volume in the drum 0.80 m³ Maximum material weight in the drum 300 kg Pump 26 cm³ 1000 g/min Unit 2 Tank capacity 110 l Maximum operating pressure 1.5 MPa (150 bar) Briquette diameter: 60 mm Maximum briquette length per single stroke: 50 mm Production. 60/100 kg/h ("this value may vary depending on the characteristics of the material") General dimensions. Front, width, height 1650 mm 1110 mm 1410 mm (*moving side of the machine) Net weight. 750 kg Dcolnsumxkxe Twqbsg New seal set in the hydraulic pump

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, YUKON DAD 2BL (built in 2014) For clean components on a continuous basis Stainless steel continuous cleaning system with oil separator for continuous material flow. The items to be cleaned pass continuously, in cycles if necessary, through the consecutive treatment zones. Cleaning is achieved by passing the items past the permanently installed nozzle systems. For parts with a maximum dimension of 400 x 100 mm A wire-link conveyor conveys the components horizontally or vertically through the cleaning system • Circumferential nozzle frame - the offset nozzle arrangement enables cleaning on all sides • Separation of the treatment zones reduces mixing • Adaptation of the nozzles and nozzle frames to the component • Adaptation of the usable dimensions, load capacities, and pump outputs is possible The process steps take place in consecutive treatment zones: • Spray cleaning, cascading of different wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volume: Wash tank: 800 liters Rinse tank: 500 liters Heating capacity: Wash tank: 48.0 kW Rinse tank: 30.0 kW Wash tank pump: 3.0 kW Rinse tank pump: 2.2 kW Washing pump pressure: 3 bar Dcjljwbt H Hjn Twqbsg Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature min. 45°C to max. 60°C WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: ready for operation (used), total height: 3,580 mm, total length: 10,345 mm, controller manufacturer: Heidenhain, net weight: 23,500 kg, total depth: 3,452 mm, 4 assen gelijktijdig hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 24 posities T-gleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Dimensions clamping space - table: 7000 x 1500 mm Power on spindle: 30 kW Dcoln Tjwaiukswqbeg Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: used, Functionality: fully functional, Year of construction: 2012, operating hours: 11,947 h, load capacity: 4,500 kg, lifting height: 4,145 mm, free lift: 1,230 mm, mast type: triplex, construction height: 2,340 mm, fork carriage width: 1,360 mm, total length: 3,250 mm, drive type: Treibgas, construction width: 1,400 mm, net weight: 7,340 kg, LPG Forklift Load Center of Gravity: 600 Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Delnjwa Enye Twqbecg Front Tires Type: Super Elastic Front Tires Size: 3.00-15 Rear Tires Type: Super Elastic Rear Tires Size: 28x9-15 Description: In addition to this Svetruck model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 1060-26. P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Full-free lift,

Condition: used, machine/vehicle number: 12949, Rotor diameter: 400 mm Rotor width: 600 mm Rotor blades: 3 Dslnewbwrgj Twqbjcg Stator blades: 2 Inlet cross-section approx. 400 x 600 mm Drive motor: 18.5 kW

Year of construction: 2009, Condition: ready for operation (used), A total of four fabric inspection machines (rolling machines) are available for the textile industry, used for checking the quality of materials/products. 1) Fabric foaming machine for short and sample rolls, year of manufacture: 2006. 2) Fabric foaming machine for make-ups from 30m, max. roll weight: 1000kg, year of manufacture: 2009. 3) Fabric foaming machine for make-ups from 30m, max. roll weight: 1000kg, year of manufacture: 2009. 4) Fabric foaming machine for make-ups from 30m, max. roll weight: 1000kg, year of manufacture: 2009. Including additional film packaging. Documentation available. On-site inspection is possible. Individual sale possible. Doln Tewf Nx Tswqbocg

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, A complete glulam production line is for sale. The system consists of components from System TM, feeding, finger jointing technology NKT, automation HIT (multi-level storage, transport, patching station, feeding, lamella planer and Kallesoe, etc.), REX planing machines, pre-planer, lamella planer, and finishing planer. Kallesoe high-frequency press. The extraction system can also be installed. Pictures to follow. Dcolnewgcchj Twqbeg

Condition: used, Hotrunner controlunit Vetter MC 712 12 units 230 Volt price: 2.850 € Delnewgb T Se Twqbjcg contact: Mr. Rainer Eckerle

Condition: excellent (used), color: other, Year of construction: 2024, Year of manufacture: 2024 Attachment suited for: Construction machines Dcelnsubaacj Twqbsg Quick coupler system: Yes Technical condition: very good Visual appearance: very good Damages: none Price: On request Eurosteel puinriek, ongebruikt. Snelwissel aansluiting, geschikt voor L60 / L70 /L90 SRSAX069-2.0

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, load capacity: 1,000 kg, total height: 835 mm, total length: 2,130 mm, table width: 1,160 mm, faceplate diameter: 900 mm, rotational speed (max.): 1 rpm, through hole: 200 mm, Equipment: rotational speed infinitely variable, including remote control Dcslnevlwlis Twqbog

Condition: used, Year of construction: 2019, machine/vehicle number: 1000032529, Power: 23.5 kW, travel distances: X-axis: 4160 mm, Y-axis: 2400 mm, Z-axis: 240 mm, with additional C-axis, rotation: 360 degrees, 40-station tool changer, separate control cabinet system, made by RITTAL, 12 suction cups and 15 tool holders, some equipped with tools Djln Twqowav S Nobocg

Condition: used, Year of construction: 2018, Used dust extractor Year of construction 2018 H 3 certified Cleaning with vibration Dceleu Dcw Eon Twqbog with automatic start (potential-free contact) Suction nozzle diameter 140 mm (160 mm when removing the nozzle) Motor power 2.2 kW Filter area approx. 7 m² Nominal volume flow approx. 1100 m³/h at 140 mm Nominal volume flow approx. 1900 m³/h at 160 mm Max. volume flow 1900 m³/h Negative pressure approx. 2800 pa Collecting volume approx. 175 l max. Sound pressure level 73 dB(A) Dimensions: LxWxH 1418 x 1012 x 1990 mm Weight approx. 350 kg PLC control with automatic start and text display LxWxH 1258 x 1012 x 1990 mm Availability: by arrangement Storage location: Baden-Württemberg

Condition: used, color: other, Year of construction: 2017, Serial number: SLCM20901702D8903 Dolnjwfd Ebo Twqbecg Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, hot runner control device Xintech 16 fach 220 Volt price: 3.450 € Deln Towgb Icjwqbjcg contact: Mr. Rainer Eckerle

Condition: not inspected (used), Functionality: fully functional, Rubber chains of various sizes available. If you are interested, please write to me. Dolnov Ilv Ie Twqbecg

Condition: excellent (used), Year of construction: 2000, ANTER 1100 Year 2000 - Serial Nº 905/629 Styles: straightline boxes, lockbottom boxes, 4 and 6 corner boxes Material: Cardboard from 200gr/m2 – 600gr/m2; Corrugated board E flute Max. width size: 1100mm, Min. width size: 106mm Max. box length: 850mm, Min. box length: 60mm Speed: up to 350m/min Cold glueing unit PAFRA with 3 guns Wired remote control Power requirement: 30kVA Electrical installation: 380V Total length: 12,875m Total width: 1.57m Weight: 5,830Kg Machine in production and in good condition Availability: Dolewbf Snon Twqbscg Location: Europe

Condition: used, Year of construction: 2017, machine/vehicle number: 30-3200, Consisting of: material feed, ball roller table, portal feed around vacuum traverse, grinding unit, power: 117 kW, separate control cabinet with operating unit, control system, SIEMENS, turning table, grinding unit, power: 117 kW, material discharge, drilling and water jet unit, power: 58 kW, serial no. 3-3200-38, separate control cabinet system, RITTAL, with cooling unit, and washing system, TECWASHER, type: F.18-S-B2 B-CD, built in 2017, serial no. 30-3200-08, control system, SIEMENS, with TOUCHPANEL, attached extraction system, discharge table and video surveillance Dcjln Twqewav S Aobog

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Cutter Stephan UM60 E Cutter Brand Stephan Model UM60 E Year of production 1999 Power 5.5/7.5kW Deln Twjwgybhjqbocg Voltage 380V 50Hz 13/17A Two speeds 1500/3000 rpm

Condition: used, Year of construction: 2013, Second hand automatic shape glass cutting table (jumbo), BOTTERO Type 352 BCS-J, Year 2013 Djln Tjwfhidjwqbecg

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, The plant consists of 7 linked units. Two pictures are provided for each plant/unit - each in a separate handout. For more detailed information about the plant, you can visit the plant on-site. The plant consists of 7 linked units. Dcoln Tewf S D Sjwqbjg Two pictures are provided for each plant/unit - each in a separate handout. For more details about the plant, you can visit the plant on-site. ----- ----- Please state your offer price!!! Sale only within Europe, including Turkey. Price excludes packaging; Delivery terms: FCA (machine location). ===== For technical data, see handout. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, and for compliance with all safety and environmental protection requirements specified in accident prevention regulations. Not for sale to private individuals. Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guarantee and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, pressing force: 100 t, - Capacity 100 tons - Cylinder stroke 400 mm Doln Twqswfnqzjbscg - Working width 1000 mm - Pressure gauge - Emergency stop - 400 V

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW Dcjln Tjipvrbswqbog with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Dsln Twer Eq Spoqbjcg with scorer 350mm Upper intake guard Altendorf Automatic motor brake Weight approx. 1200 kg Technical data subject to change