Used Knegt Rotorkopeg 125 for sale (6,617)

Condition: used, Year of construction: 2008, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19933 Bsb Epzov U Sq Ssufowl 2008 model Hour unknown King pin, 3 axle chassis

Condition: used, Year of construction: 1983, operating hours: 12,120 h, * Hitachi KH 125-2 duty cycle crawler crane * Year of manufacture: 1983 * 30 m boom * Service life: 12,000 h * Lifting capacity: 35,000 kg Bwjb Eowgva Tepzufjl * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: good (used), Year of construction: 2022, Functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Bjb Epzewgz T Soufswl Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: new, BIS00CW, BIS L-405-037-003-05-MU, Balluff, LF read/write head, 125 kHz Bjb Epjvrgugezufowl Model: BIS00CW Type: BIS L-405-037-003-05-MU Condition: New

Condition: ready for operation (used), Year of construction: 2000, Main Drive Tool taper SK 40, SK 50, HSK-E50, HSK-A63 Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm A-Axis Movement +/- 45° / 30° C-Axis Movement n x 360° Tools Max weight 10 / 20 kg Max tool diameter 100 / 110 mm Max tool length 450 mm Bob Ejuh Hugjpzufowl Additional Equipment Tool Changer with Magazine: SK 40 / SK 50: Magazine Capacity: 30 / 60 / 120 / 180 tools, HSK-E 50: Magazine Capacity: 30 tools Total Weight in Magazine: 100 / 200 / 400 / 600 kg (SK 40), 200 / 400 / 800 / 1,200 kg (SK 50) Max. Rotational Speed: 8.1 U/min Feed: 2,900 °/min// Max. Rotational Speed: A-Axis: 5.6 U/min, C-Axis: 7.1 U/min Tool Clam Swivel Range A-Axis: +/- 45° / 30° // Rotary Range C-Axis: n x 360° Tool Interface: Tapered Shank SK 40 or SK 50 according to DIN 69871, Hollow Shank HSK-E50 or HSK-A63 according to DIN 69893 T-Slot Distance (Radial): 22.5° / T-Slot Width: Direct T-Slot: 18 H7 mm, Clamping Slot: 18 H11 mm Center Bore Diameter: Ø 50 H6 mm Permissible Load on Work Tables: Fixed Table: 2,500 kg, NC Rotary Table: 2,000 kg, NC Swivel Rotary Table: 1,000 kg Main Drive Tool taper SK 40, SK 50, HSK-E50, HSK-A63 Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm A-Axis Movement +/- 45° / 30° C-Axis Movement n x 360° Tools Max weight 10 / 20 kg Max tool diameter 100 / 110 mm Max tool length 450 mm Additional Equipment Tool Changer with Magazine: SK 40 / SK 50: Magazine Capacity: 30 / 60 / 120 / 180 tools, HSK-E 50: Magazine Capacity: 30 tools Total Weight in Magazine: 100 / 200 / 400 / 600 kg (SK 40), 200 / 400 / 800 / 1,200 kg (SK 50) Max. Rotational Speed: 8.1 U/min Feed: 2,900 °/min// Max. Rotational Speed: A-Axis: 5.6 U/min, C-Axis: 7.1 U/min Tool Clam Swivel Range A-Axis: +/- 45° / 30° // Rotary Range C-Axis: n x 360° Tool Interface: Tapered Shank SK 40 or SK 50 according to DIN 69871, Hollow Shank HSK-E50 or HSK-A63 according to DIN 69893 T-Slot Distance (Radial): 22.5° / T-Slot Width: Direct T-Slot: 18 H7 mm, Clamping Slot: 18 H11 mm Center Bore Diameter: Ø 50 H6 mm Permissible Load on Work Tables: Fixed Table: 2,500 kg, NC Rotary Table: 2,000 kg, NC Swivel Rotary Table: 1,000 kg This 5-axis DMG MORI DMU 125 milling machine was manufactured in 2000. It features a robust spindle system with options for SK and HSK tool interfaces, supporting diverse machining needs. The machine offers a large working area with X, Y, Z travel ranges of 1250 mm, 880 mm, and 800 mm respectively, and can handle significant loads on its various tables. Ideal for complex and precise machining tasks, the DMG MORI DMU 125 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Functionality: fully functional, mileage: 264,304 km, power: 230 kW (312.71 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 19,000 kg, empty load weight: 11,100 kg, operation weight: 19,000 kg, maximum load weight: 7,900 kg, tire size: 315/80R22.5, axle configuration: 4x4, number of seats: 2, first registration: 07/1994, next inspection (TÜV): 12/2025, emission class: euro1, brakes: engine braking, suspension: steel, Year of construction: 1994, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, cruise control, differential lock, head guard, hydraulics, low noise, tilting carriage, trailer coupling, Model: Mercedes-Benz 1831AK/38 V6 with Hiab 125-2 crane Mileage: 264,304 km (original) CRANE: - HIAB 125-2 - 2x hydraulic extensions - 2x manual extensions - Lifting capacity: 6,000kg - Operating radius: 11.9m Tipping hydraulics (PTO) Big Axles Antennas Radio/cassette/CD/MP3 Air conditioning Air-suspended seat with seat heating and fully adjustable Electric windows Electrically adjustable exterior mirrors Sun visor Work lights Fog lights High beam Hazard light Storage box Emissions class: EURO1 Wheel formula: 4x4 Differential lock Wheelbase axle 1 and 2: 3,790 mm Tire size Axle 1 (front): 315/80R22.5 Tire size axle 2 (rear): 315/80R22.5 Bsbewbt Abo Epzufowl Leaf spring suspension / leaf spring suspension Wheel cover Empty weight: 11,100 kg Payload/load capacity: 7,900 kg Permissible total weight: 19,000 kg Vehicle overall dimensions (length x height x width): 685 cm x 360 cm x 2.55 cm With new TÜV and AU after consultation for an additional charge! You can also contact us for further information and pictures via WhatsApp, Telegram, Viber and Signal. Trade-in possible! Price is net We can transport your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plate on request! We support you with export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs license plate production, if required A viewing and test drive is possible at any time, even on weekends, by telephone arrangement! Exclusion of liability: The buyer is obliged to independently check the condition, dimensions and equipment of the goods/vehicles. All information is without guarantee. Subject to changes, prior sale and errors.

Condition: used, mileage: 189,000 km, power: 287 kW (390.21 HP), gearing type: mechanical, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 09/2005, next inspection (TÜV): 09/2025, Year of construction: 2005, Equipment: air conditioning, crane, - 1 owner - German vehicle Bob Epzewf S R Soufjwl - Good condition! - AP (large) axles! - 2 side tippers with on-board system!

Condition: new, Year of construction: 2024, Brand new Schechtl folding machine with custom paint finish Sheet width: 1250 mm Steel sheet thickness: 1.25 mm Aluminum sheet thickness: 2.00 mm Stainless steel sheet thickness: 0.80 mm Color: Custom paint finish Space required: 1730 x 740 x 1180 mm Machine weight: 290 kg Bwob Epowcaxxozufjl without roller shears Opening width: 90 mm Bending angle: 150 mm

Condition: used, Year of construction: 2018, Used machine Year of construction 2018 RLA 125 clean air extraction systems for wood chips and wood dust. Designed for commercial use. Made in Germany. All clean air extraction systems in this series are dust-testedHigh extraction performance with low space requirements Maximum performance in this class Quality made in Germany Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for multiple dust sources Description of the filter Ultra compact with maximum filter surface area Filter material made of polyester fleece, aluminized, washable and therefore with a long service life Filter tested and approved as standard in antistatic design in accordance with category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter High-quality, sophisticated design for professional use Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Optimum chip distribution in the chip containers due to large filter surface System already fully assembled on delivery, so can be used quickly All models are mobile Low space requirement due to compact design Very quiet Scope of delivery: Basic equipment RLA 125 Connection cable 5 m with CEE plug, 5-pin, 16 A and phase inverter Four plastic castors with a diameter of 125 mm (two steerable, one with lock) Manual cleaning Availability: short term Bob Epzusu Dcxiefowl Storage location: Baden-Württemberg

Condition: good (used), Year of construction: 1994, Spaleck vibratory finishing machine type AV 125 with additional enclosure with sound insulation Bwsb Epougv Uyszufjl

Condition: good (used), Kemper SPL 125 Spiral Mixer - used - capacity 200 kg of dough / 125 kg of flour - 2 gears - 2 clocks - left / right rotation of the bowl - after renovation - collection from the warehouse / shipping option - price on request Beb Epsvk Sbpszufewl

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. Bob Epzovp Shgeufewl The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, pressing force: 125 t, throat depth: 300 mm, distance between stands: 3,050 mm, bending length: 3,550 mm, stroke distance: 240 mm, TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Distance between columns: 3,050 mm Column overhang: 300 mm Ram stroke: 240 mm Hydraulics and Energy Oil volume: 200 l Total power requirement: 11 kW Control system Control system: Cybelec DNC 70 MACHINE DETAILS Overall length: 4,500 mm Overall width: 2,200 mm Overall height: 3,000 mm Beb Eswf H Tuepzufjwl Machine weight: approx. 14,000 kg EQUIPMENT - Manual crowning available - 3 manual stop fingers available - Die shift available - Pneumatic top tool clamping available - Foot switch available

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 3-groove pulley type SPA 125 2012 Bsb Epzuewagw Nefowl -V-belt width: 17 mm -Mounting: Cone Ø 70 - 65 mm for taper bushing 2012 -Number: 4x pulleys available -Price: per piece -Dimensions: Ø 131 x 50 mm -Weight: 2.2 kg

Condition: used, _____ Description: Year of manuf. : 2005 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 1250/1000/1000 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:18.000 rpm Power:28 kW Torque:121 Nm Taper:HSK-A63 NC-Swivelhead: B-Axis:0,001° Swivelrange:-10°/+180° NC-Roundtable: C-Axis:0,001° Clamping surface:ø1.250 x 1.100 mm Tableloading (max.):1.500 kg Bebjwbx Ato Epzufewl In general: Toolmagazine:Chainmagazine with Conecleaningstation, 120 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and Highpressure, 40/80 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain Toolmeasurement:Laser Oilmistseparation:Mechanical Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Year of construction: 1965, Condition: used, Press brake Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm pressure 125 t weight 9150 kg Bwob Epzeillxyjufel

Year of construction: 2004, Condition: good (used), Matador MDC 125 baking oven - used - year of construction 1999 and 2004 - baking surface 12.5 qm - 5 chambers 1.2 x 2.0 m - computer control - gas or oil burner - ovens from production - technically sound - fully assembled - price upon request Bwob Esrkz Nispzufjl

Condition: used, The scope of delivery includes: 1x Plastic pallet, used Material color: black Total width: approx. 1,300 mm Total depth: approx. 1,100 mm Total height: approx. 125 mm Currently in stock: approx. 160 pieces This is a used item; scratches, dents, and damage may be present. The stated price corresponds to the pickup price plus VAT. Bwebov Uzxxo Epzufjl Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, thickness of jaw 125 mm 42 mm clamping width 205 mm clamping capacity 3,5 t weight 27 kg dimensions of the machine ca. 550 x 125 x 120 mm Bsbsp Sgb Ij Epzufowl

Condition: good (used), Year of construction: 1997, Dead weight: 8,000 kg, pressure: 125 t, bending length: 3,050 mm, stroke approx. 335 mm, CNC control DELEM, Bsb Epzuewduiujfewl

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 16343, FIMTEC STB F 125 post milling machine. Technical data: - Milling at an angle of 45°-90°-45°; - Engine power 1.1 kW.; - Engine speed 2830/1 min.; Bsbswgmwvj Epzufswl - Cutter stroke 380 mm.; - Cutter diameter/max. height 210/100 mm.; - Spindle diameter 27 mm.; - Dimensions 1050x850x1600 mm.; - Weight 95 kg.

Condition: used, The scope of delivery includes: Bwsbov Uzvdo Epzufsl 1x Plastic pallet, used Material color: black Total width: approx. 1,095 mm Total depth: approx. 1,095 mm Total height: approx. 125 mm Currently in stock: approx. 210 pieces This is a used item; scratches, dents, and damage may be present. The stated price corresponds to the pickup price plus VAT. Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, thickness of jaw 128 mm 42 mm clamping width 205 mm clamping capacity 3,7 t weight 27 kg dimensions of the machine ca. 550 x 125 x 120 mm Bob Epzuop Sgbyofswl

Condition: used, The scope of delivery includes: 1x plastic pallet, used Material color: black Total width: approx. 950 mm Total depth: approx. 950 mm Total height: approx. 125 mm Currently in stock: approx. 160 pieces This is a used item; scratches, dents, and damage may be present. The stated price corresponds to the pickup price plus VAT. Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Bwjb Epzev Uzt Neufjl General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, thickness of jaw 125 mm Bweb Epop Sgb Dezufsl 42 mm clamping width 205 mm clamping capacity 4,7 t weight 27 kg dimensions of the machine ca. 550 x 125 x 120 mm