Used Demag for sale (553)

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each Dwjdpotpkv Ajfx Afvod -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit Dwedpfxjtltvze Afvjd TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures Dsdpjvylhbjfx Afvewd GDR3 H12 Motor ZBR100 B4 B050

Year of construction: 2003, condition: excellent (used), Display – Demag Year of manufacture approx. 2003 Dwsdpfx Aohi Ttnofvod

Condition: ready for operation (used), Year of construction: 2009, Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement. Dwedpfxjylbq Ts Afvsd

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Dwodpfx Afoy Tx Rbjvod

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Dwsdev Uvn Ijpfx Afvsd Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Dedpfxjv Uvvfe Afvewd Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW Dedpfxec Uz Hus Afvewd -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: used, Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available Dwsdpfx Afjdff Nbjved -Dimensions: 290/170/H205 mm -Weight: 13 kg

Condition: new, DEMAG traverses with rope pulleys for Dwsdpfsu U Nhvsx Afvsd P Train / DR / MDR / DH

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: Dedpfou U Raysx Afvswd 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Year of construction: 1989, condition: good (used), machine/vehicle number: divx, DEMAG KBK crane canopy crane runway rails 1000 + accessories Payload / lifting capacity 80Kg - 2000KG The item is supplied complete: KBK 2 rails, rail connectors, trolleys, end plates, brackets/hangers Dedpfety Tkzsx Afvowd Rails and accessories are disassembled and immediately available. This item is only sold complete. Full volume approx. 2 truckloads - approx. 22000KG Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or pickup by appointment only

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Dsdpjtqwrvofx Afvewd Price without chain hoist – chain hoist or crane can also be found in our shop.

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam Dedpfouch Rfox Afvewd 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces Dsdpowug Nuofx Afvswd 6. Clutch Set 7. Brake Disc 13KF - 3 pieces 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3

Condition: used, Year of construction: 1999, Technical details: Dwedpfewvkggox Afved screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Dedpfxsv Ipvxs Afvowd

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 12428 B500-851, Overheadcrane ± 14.170 mm x 25.000 kg Dsdpfxov Ip Afj Afvswd

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 13354 B521 850, Overheadcrane ± 10.500 mm x 12.500 kg Dwjdpfx Afjv Ip Dievjd

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12157 B51 864, Overheadcrane ± 10.500 mm x 16.000 kg Dwsdpfx Asv Ip E Hefvsd

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Djdpfoxhfuajx Afvewd Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: like new (used), screw diameter: 82 mm, Screw assembly (plasticizing unit) in 82mm Dwjdjw A R H Topfx Afvsd Suitable for: DEMAG D430-2350 NC II + NC III machines DEMAG D400-2800 NC III DEMAG D500-2800 NC III Shot weight: 1390g = 1560ccm (D430-2350 NC II & NC III) Shot weight: 1490g = 1670ccm (D400/D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old cylinder. The screw and barrel are as new (dimensions are OK) Complete with RSP.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Dedpfow Ixz Usx Afvswd Shipping by freight carrier or self-collection by appointment only.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Dodpfxsxtmp Ne Afvjwd