Used Mc Cormick for sale (1,761)

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder Iedexqgrxepfx Apietn BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Rapid Traverse: 30 m/min Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m About the machine: Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Qualitative Machine Benefits • Perfect condition Itedpfjzv N Iaex Apijn • Full documentation available including service history Technical Machine Benefits • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Dimensions Machine Depth 4200 mm Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Isdpfxsz Dxpme Apistn Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, Automatic wheel banding machine. Itjdpfxezhtb Is Apijn

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm Iodpfx Apozb N Uxeietn control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle - WITHOUT extraction system

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Spinner TC800-110MCY including tool package with tool cart Control: Siemens 840D Isdpsz E A Txefx Apietn Max. Drehdurchmesser: 500 mm Max. swing diameter: 800 mm distance between centers: 800 mm X axis: 360 mm Y-axis: 120 mm (-55 + 65 mm) Z-axis: 900 mm Fast travel X/Z: 15 / 24 m/min max. workpiece weight: 800 kg Rod passage: 110 mm Spindle power: 22 / 33 kW Torque gear stage 1: 175 / 263 Nm Torque gearbox stage 2: 700 / 1050 Nm Spindle speed: , U / min tailstock: Pinol diameter 110 mm, Pinol stroke 100 mm Number of tool stations: 12 driven stations toolholder: VDI50 Speed-driven tools: 4000 rpm (5 / 9.6 kW) Setup dimensions: 4203 mm x 1980 mm x 2090 mm Weight: 8000 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer the Stephan Microcut MC15 cutter, designed for precise grinding, mixing, and emulsifying food products in food processing plants. It is a compact, industrial machine manufactured by Stephan Machinery GmbH, a company renowned for its solutions for producing fillings, emulsions, pastes, sauces, and other products requiring a uniform texture. The MC15 model is ideal wherever consistent processing results, high-quality grinding, and stable operation under production conditions are essential. With a rotational speed of 2945 rpm and a power output of 11 kW, the machine ensures intensive and effective processing of raw materials, resulting in a uniform consistency of the final product. It is an excellent solution for applications requiring precise cutting and dispersion of ingredients. The Stephan Microcut cutter is a good choice for companies looking for a used, reliable machine for precise product processing. Technical specifications: Manufacturer: Stephan Machinery GmbH Model: Microcut MC15 Year: 2020 Power supply: 400 V Power: 11 kW Rotational speed: 2945 rpm Current: 22 A Motor type: HEFIE3 132L/2-2200 Advantages of the Stephan MC15 cutter precise grinding and emulsification of the product, Ijdpfsy Eplwjx Apijtn high operating speed, compact, industrial design, German build quality, suitable for the production of fillings, emulsions, pastes, and sauces, stable operation in an industrial environment. Stephan Microcut MC15 is a practical solution for companies that want to improve product processing quality and work with a proven machine from a reputable manufacturer.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 800457, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, The machine was completely overhauled in 2012. TECHNICAL DETAILS X-axis travel: 4,000 mm Y-axis travel: 3,400 mm Z-axis travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm Table load: 2 x 10 t C-axis swivel range: 0–360° (in 1° increments) A-axis swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS Itsdpfx Aox Uwnbjpien CNC control: Siemens 840D SL Axes: 5 controlled Total power requirement: 70 kVA Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm Note: The machine has already been dismantled.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, The FEMCO BMC 110 T2 is a classic T-frame boring machine designed for heavy-duty and high-precision machining. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 20 bar Itodjxc Hphjpfx Apijn Tool changer: 60-position chain magazine with dual gripper Chip disposal: Dual articulated belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Support bearing: Spindle support bearing ø 250mm Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.010 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Itedpfxjvf D Ane Apijn

Condition: new, empty load weight: 2,170 kg, color: blue, driver cabin: other, gearing type: other, Year of construction: 2021, Equipment: crane, Vehicle location: Bovenden, emergency stop, grab control, high seat, 3x hydraulic extensions Ijdpfx Asyrhwmspistn Superstructure: HMF 2110L3-MC with high seat, load chart: 5.4m – 3490kg, 7.3m – 2520kg, 9.4m – 1950kg, 11.3m – 1590kg! ACCESSORY DETAILS WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Iedpfoyvuh Iex Apistn Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: excellent (used), fuel type: diesel, color: green, lifting height: 21,000 mm, axle configuration: 4x4, Year of construction: 2014, operating hours: 4,560 h, Equipment: all wheel drive, Technical information Chassis type: rigid Drive: Wheel Empty weight: 15.500 kg Functional Lifting capacity: 4.500 kg Dimensions of cargo space: 700 x 240 x 300 cm CE mark: yes Ijdpfxjz Epzco Apijtn Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Forks = Remarks = Merlo 45.21 MCSS Roto telehandler * 2014 * Diesel drive * Remote control * Pallet forks * 4,000 kg winch * 21-meter working height * 4,500 kg lifting capacity * 15,500 kg dead weight * All documents included

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 • incl. handwheel + 3 vices with clamping devices Itodpfxjyucbfo Apion

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Itsdpsz Hxclsfx Apijn Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Isdpjxmd Snjfx Apijtn Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: good (used), Year of construction: 1998, Deckel Maho DMC 103V Year of manufacture: 1998 Control system: - Siemens 810D Main spindle: - max. 8,000 rpm Travel distances: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 mm - max. table load 800 kg Tool changer: - 24 magazine slots Availability: - Immediate Iodpfx Asz Iyqaopistn

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Iedpfoz I N E Tsx Apistn Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT Isdpfx Asz Hu Siepijtn NC rotary table with C-axis NC swiveling head FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! Itodpfxsz Izavo Apien The following components of the machine have been renewed: Motor and pump of the hydraulic system Hydraulic and pneumatic hoses (partially) Control cabinet LT module replaced Drum of the Knoll system TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis: 360 x 0.001 (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control model: Siemens Sinumerik 840D Overall length: 7,000 mm Overall width: 5,000 mm Coolant supply: 50 bar Coolant system: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total power consumption: 20 kW Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on counter: approx. 48,804 h Spindle running time: 23,574 h total EQUIPMENT Documentation/manual Speed infinitely adjustable Chip conveyor Knoll cooling unit with drum filter (30/40/50 bar via M-command) Tool measurement: Renishaw measuring probe Tool breakage monitoring in the machining area Pallet storage space (4 places) Pallet sequence operation Enclosed work area enclosure according to UVV Network capability Technical documents & layout plan

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMC 850 V With Heidenhain TNC 640 control system Year of manufacture: 2016 Travel ranges: X 850 Y 520 Z 475 Spindle speed range: 0 – 20,000 rpm, stepless With the following accessories: Fixed angular table, clamping surface 1160 mm x 575 mm Vertical tool changer with 30 magazine slots (HSK 63) 3D measuring probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate safety screens Full protective enclosure with sliding doors and interior lighting Operating modes 3 + 4 Itodpsz I Dcaofx Apion Compressed air supply for linear measuring systems Spindle oil cooler Chip conveyor Chip flushing system Chip flushing gun Coolant system (reinforced coolant pump) 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Ijdpfx Asz Ibb Tepijtn Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: excellent (used), Year of construction: 2010, CNC lathe ECOCA MT-208MC 750 YEAR OF MANUFACTURE: 2010 CONTROL: Sinumerik 828D Technical data: Work area * Swing diameter over bed: 525 mm * Swing diameter over cross slide: 384 mm * Max. turning diameter: 250 mm * Max. machining length: 750 mm * X-axis travel: 175 mm * Z-axis travel: 537 / 787 mm Main spindle * Spindle speed: 750–4,800 rpm * Spindle bore: ASA A2-6 * Spindle bore: Ø 62 mm * Draw tube diameter: Ø 52 mm * Front spindle bearing: Ø 100 mm * Spindle taper: 1:20 * Chuck size: 8 inches * Spindle motor: 7.5 / 9 kW Ijdpjz Hl Easfx Apietn * Optional, according to manufacturer: 9 / 11 kW Axes * X-axis motor: 1.6 kW * Z-axis motor: 3.0 kW * Rapid traverse X-axis: 24 / 20 m/min * Rapid traverse Z-axis: 24 / 20 m/min * Guides: Linear / flat guides (depending on the model) Tool turret * Powered servo turret Baruffaldi * Tool stations: 12 * Tool holder: VDI * Max. outer turning tool: 20 mm * Drilling bar diameter: Ø 40 mm Tailstock * Quill diameter: Ø 58 mm * Quill stroke: 88 mm * Tailstock travel: 415 / 665 mm * Quill holder: MK4

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2003. It features a robust X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Tool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 123 A Technical Specification Taper Size HSK 100 Itjdpfxjz Ir Rxs Apien

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Ijdoz Nym Eepfx Apijtn