Used Mazak for sale (309)

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Bedpfx Asyb S Nremmedg Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Bdsdpfjx Rkvqjx Ammsg Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Manufacturer: Machine Type: Year of manufacture: Date of commissioning: YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 FEATURES: Bdodpfezda Dvex Ammog - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B

Condition: good (used), Year of construction: 2000, functionality: fully functional, Mazak VTC 200 B, Year of manufacture: 2000, Control system: Mazak Mazatrol 640, Bdsdpfozl R A Dox Ammeg Travel range X/Y/Z: 1120/510/510 mm, Table size: 1460 x 510 mm, Table load capacity: 800 kg, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Coolant pressure: 15 bar, Prepared for 4th axis, 4th axis defective, Performance Package.

Condition: good (used), functionality: fully functional, Year of construction: 2020, operating hours: 11,706 h, machine/vehicle number: 295269, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Mazak, controller model: FX30I-L5, laser type: CO₂ laser, pipe length (max.): 15,000 mm, - Auction Machine - For sale: a MAZAK laser cutting machine, model 3D FABRI GEAR 400 III - 4.0kW laser, serial number 295269, year of manufacture 02/2020, weight 38,900 kg, with MAZAK FX30I-L5 control, operating hours approx. 11,706, with 15 m loading and 15 m unloading area; special accessories: 8.5" cutting head without lens (M5) with non-contact height sensing, touch sensor, chain conveyor, detachable impulse handwheel, MtConnect adapter, Mazak FG CADCAM programming software, and more. Would you like to inspect it? The tube laser can be inspected at our location in DE-84339 Unterdietfurt. Bjdezm R H Sspfx Ammjdg Interested? Further information and documents are available upon request.

Condition: like new (used), Mazak VCN-530C 4 Axis VMC Year 2020, Bsdpfx Ajzil A Hemmedg Smooth Control, Kitagawa 4th Axis with 300mm face plate 1300mm x 550mm table, 1050mm x 510mm x 510mm travels, 12,000rpm spindle, Renishaw probing,

Condition: used, Makatrol Smart Control Serial Number 254702 YOM 2014 Bsdpfx Aezilpmommjdg EIA & Mazatrol Programming Full Factory 4th Axis 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant UK Buyers - Price £39,000 +VAT Carriage/delivery is additional

Condition: used, Year of construction: 2014, Mazatrol Smart Control Serial Number 249154 30 Tool Magazine EIA & Mazatrol Programming USB Ports No swarf conveyor No thru coolant UK Buyers - Price £32,000 +VAT Bedpfx Amszillhsmjdg Carriage/delivery is additional

Condition: ready for operation (used), Year of construction: 2018, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 2, This Mazak Optiplex Nexus 3015 4,0kW Fiber + Fasani CSS3015 was manufactured in 2018. A fiber laser cutting machine featuring a 3000x1500mm max. sheet size, 4.0kW IPG fiber resonator, intelligent nozzle changer, and Donaldson DFPRO4 extraction. Includes Fasani CSS 1530 automation and a pallet changer. A great opportunity to buy this Mazak Optiplex Nexus 3015 fiber laser cutting machine. Contact us for more information. Additional equipment • Intelligent nozzle changer • Intelligent monitoring and focus detection • Smart software • Donaldson DFPRO4 extraction • Pallet changer • Open robot interface • Fasani CSS 1530 automation Extra Information Machine still under power Bodszdd Rmjpfx Ammsdg

Condition: used, Year of construction: 1998, x-travel 1050 mm y-travel 510 mm z-travel 560 mm control Matzatrol type M Plus table surface area 1300x550 mm 1,5 t workpiece weight max. 1500 kg Tool changer . turning speeds . U/min Bsdpfezdca Tex Ammedg weight of the machine ca. 8,9 t dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bdjdpfx Aoi Eb Dnjmmjg

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bdodpfx Amsi Eb Drjmog

Condition: ready for operation (used), Mazak Mazatrol Cam M-2 Control Panel YM2B BN110B367, used, shows significant signs of wear, 100% functional, scope of supply as shown in the photos. Bdedpfji Eb Dkjx Ammjg

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Bedpfxju U R E Aj Ammjdg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions Bdjdszcwyljpfx Ammjg High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: used, Year of construction: 2006, Opportunity to purchase a Mazak 3 axis vertical machining center in good working condition. Immediately available for delivery. Viewing possible upon appointment. Including a chip conveyor, cooling 15bar through the spindle, Renishaw measuring probe and tool presetter. Cnc control Mazatrol PC Fusion CNC 640 M Nexus Table Size (Clamping Surface) 550 x 1300 mm Maximum Table Load 1200 kg Number of T-Slots 5 T-Slot Spacing 100 mm Slot Width 18 mm Rapid Traverse 36000 mm/min Spindle speed Range 40 – 12,000 rpm Cutting feed Rate 1 – 8,000 mm/min Tool shank MAS BT-40 Tool positions 30 Max. tool diameter 80 mm Max. tool length 350 mm Max. tool weight 8 kg Chip conveyor yes Machine weight 7100 kg Bsdpfx Ajzkwiusmmedg

Year of construction: 2016, condition: used, Number of machnines 10 0 Cycle time . /min production capacity . Control . Everything must go due to business closure: High-quality machining centers (Deckel Maho, DMG, Mazak, Spinner) & accessories, cabinets, vices, material, grinding machines, EDM machine, measuring machine, on July 16, 2026 Dear Sir or Madam, dear business partners and interested parties, Due to the complete liquidation of the mechanical engineering company Schröter Maschinenbau GmbH, we are organizing an exclusive, one-day sale for the entire company, machine, and workshop equipment. Take this opportunity to acquire professional production facilities and extensive accessories directly from the location. Prospectus & Sale Overview: • Date: Thursday, July 16, 2026 • Time: 9:00 AM to 2:00 PM • Address: Lenneperstr. 188, 42855 Remscheid • Type of Sale: Direct sale against cash payment / or upon pickup and loading. You will receive an invoice. Ex location. Excerpt from the Sales Portfolio: Bdodpfezk Rc Iox Ammog • Multiple CNC Machining Centers: High-precision milling and drilling centers in ready-to-use condition. • Extensive Accessories: Tool holders, clamping devices, vices, measuring technology, and precision tools. • Workshop Equipment: Heavy-duty shelving, workbenches, workshop trolleys, as well as various hand and power tools. Get an Impression: To give you a precise picture of the machines, their condition, and the available accessories in advance, we have compiled a digital overview with photos and technical details for you. Simply click on the following link: ?usp=drive_link Important Notes: The sale is strictly on an "as is, where is" basis and excludes any warranty. The buyer is solely responsible for the dismantling, disassembly, and transport of the purchased items. Please plan your visit well in advance! We will close the gates at 2:00 PM. Should it run a bit later, please feel free to contact us by phone! We look forward to your attendance.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 255179729, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 74 kVA, torque: 525 Nm, controller manufacturer: Mazak, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 1,500 kg, total height: 3,200 mm, total length: 6,400 mm, total width: 2,600 mm, table width: 630 mm, table length: 630 mm, table load: 1,500 kg, overall weight: 19,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 80, mount diameter: 50 mm, tool length: 500 mm, tool diameter: 420 mm, tool weight: 30,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in full working order. It is being sold due to a new acquisition and lack of space. The table has a swivel axis of 1/360°. Included with the machine are some tool holders, an external coolant drum filter tank with a capacity of approximately 800-900 liters (L/W/H: 1800mm, 800mm, 650mm), a Renishaw MP10 measuring probe system, a grid structure in front of the machine (partially mobile), and 2 pallets measuring 630x630. Machine dimensions L/W/H: approximately 6400mm/2600mm/3200mm. The buyer is responsible for dismantling and removing the machine. The machine can be inspected while powered on. Appointment by arrangement. Bodpfx Amezkkdrjmedg

Condition: excellent (used), Year of construction: 2018, operating hours: 15,854 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, workpiece weight (max.): 500 kg, total height: 3,060 mm, total length: 3,075 mm, rotational speed (max.): 12,000 rpm, overall weight: 11,000 kg, spindle nose: SK40, number of slots in tool magazine: 30, chuck outer diameter: 3,325 mm, Equipment: chip conveyor, fume extraction, CNC 5-Axis Machining Center MAZAK Variaxis J600, 2018 You are welcome to inspect the machine in our workshop while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK Variaxis J600 is a powerful vertical 5-axis machining center for the precise and efficient complete machining of complex milling parts. It features a tilting A-axis (-120° to +90°) and a continuously rotating C-axis (±360°), allowing even complex geometries to be completed in a single setup – ideal for general mechanical engineering as well as series and single-part production. The robust design with travels of 850 mm in the X-axis, 550 mm in the Y-axis, and 510 mm in the Z-axis offers ample working space. The rotary table with Ø600 × 500 mm can accommodate workpieces with a maximum diameter of approximately 730 mm and a maximum height of 450 mm – with a maximum table load of 500 kg. The distance from the spindle nose to the table surface can be adjusted between 70 and 580 mm, enabling flexible accommodation of various workpiece geometries. The powerful milling spindle with speeds up to 12,000 rpm and the SK40 tool holder (DIN 69871) ensure high cutting performance and precision. The tool magazine (ATC) with 30 tool positions ensures short non-cutting times and flexible machining processes, even for complex manufacturing tasks. The machine is controlled via the modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. Comprehensive features ensure optimal machining conditions: internal coolant supply (IKZ), automatic tool length measurement, synchronous thread drilling, cylindrical interpolation, and the high-speed functions High Speed, Super High Speed, “G00 slope constant,” a KSS mist extraction system from LNS, a chip conveyor from Mayfran, and a Renishaw measuring system. With a machine weight of approximately 11,000 kg and dimensions of 3,075 × 3,325 × 3,060 mm (L × W × H), the model offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile 5-axis machining center that guarantees high precision, performance, and reliability in industrial production. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG Bdedpfezkmaiox Ammsg

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, turning diameter: 380 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, rotational speed (max.): 5,000 rpm, torque: 465 Nm, bar passage: 65 mm, workpiece weight (max.): 300 kg, total height: 1,857 mm, total length: 2,760 mm, chuck outer diameter: 203 mm, total width: 1,835 mm, bar diameter (max.): 65 mm, swing diameter over bed slide: 695 mm, overall weight: 5,600 kg, Equipment: chip conveyor, fume extraction, CNC lathe MAZAK Quick Turn 200MY (year of manufacture 2021) You are welcome to inspect the machine while it is powered on at our facility. If you are interested, we will send you demonstration videos of the machine. The MAZAK Quick Turn 200MY is a powerful CNC lathe for the precise and efficient machining of chucked parts in a universal application (500U). With a maximum swing diameter of approximately 695 mm and a maximum machining diameter of approximately 380 mm, the machine is particularly suitable for demanding turning operations in general mechanical engineering as well as in series and single-part production. The robust design with travels of 234 mm in the X-axis and 625 mm in the Z-axis, as well as a bar capacity of approximately 65 mm, enables the flexible accommodation of a wide variety of workpiece geometries – with a maximum payload in chucking operations of 300 kg and a maximum loading weight of 500 kg. The powerful main spindle with an 8″ chuck size and up to 5,000 rpm ensures high cutting performance and precision. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. The 16-tool turret (VDI 40, quick-change function) enables flexible and efficient machining processes, even for complex manufacturing tasks. The tailstock (MT No. 5, 550 mm travel) provides additional secure support for long workpieces. For further process reliability and automation, the machine has an automation package (part catcher as well as interface/connection option for robots and bar feeders). An LLS coolant mist extraction system (low maintenance costs) and a chip conveyor from Mayfran also ensure optimal production conditions. With a machine weight of approximately 5,600 kg, the Quick Turn 200MY offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Bsdpfezkbfgox Ammsdg Overall, it is a modern and versatile CNC lathe that guarantees high precision, performance, and reliability in industrial production. On request, we offer delivery as well as commissioning of the machine in a comprehensive, worry-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Tool holder: SK 40 Spindle power: 15 kW Bodoyanuhjpfx Ammodg Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 136722, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M Plus, table width: 400 mm, table length: 400 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, Mazak H415 • X 560 mm • Y 510 mm • Z 510 mm • Rotary table 360° - 1° indexing • 6-pallet magazine • 120-tool magazine • SK 40 • Through spindle coolant (IKZ) • Year of manufacture: 1998 • 9,150 kg Bodpfjyan Axex Ammedg Can be inspected under power.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 825 mm, controller model: Mazatrol M Plus, table width: 630 mm, table length: 630 mm, overall weight: 19,800 kg, spindle speed (max.): 10,000 rpm, Mazak FH 680 X • X axis 1100 mm • Y axis 800 mm • Z axis 825 mm Bodpfx Asyan Diommsdg • Rotary table 360° – 1° indexing • 2 pallets • Table size 630x630 mm • 10,000 rpm, BT 50 • Through-spindle coolant (IKZ) • Year of manufacture: 1996 • 19,800 kg Can be inspected under power.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, controller manufacturer: Mazatrol M Plus, table width: 510 mm, table length: 2,000 mm, overall weight: 7,320 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 36,000 h, number of spindles: 1, number of slots in tool magazine: 48, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, We are offering this used Mazak VTC-20C vertical machining center, manufactured in 1998. Manufacturer: Mazak Model: VTC-20C Year of manufacture: 1998 Condition: ready for use Category ID: 1452 Type ID: 4156 Machine type: vertical machining center Control: Mazatrol M Plus Operating hours: approx. 68,000 Spindle hours: approx. 36,000 Work table Table size: 2000 x 510 mm T-slots: 5 pieces Distance between T-slots: 100 mm Slot width: 18 mm Travel distances Bsdjzkkliopfx Ammsdg X-axis: 1660 mm (with partition 2 x 560) Y-axis: 510 mm Z-axis: 510 mm Rapid traverse rate Rapid traverse: X/Y/Z-axis: 20 m/min X/Y/Z-axis 1 - 5,000 mm/min Tool magazine Tool holder: SK 40 Tool positions: 2 x 24 Spindle speed: 10,000 rpm Accessories: Partition; Renishaw probe; chip conveyor !!! Optionally with 2 Röhm vices If you have any questions or need more information, please feel free to send us a message or call us.

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Bedpfsvdkdiox Ammedg