Used Machinery Specifications for sale (78,212)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ Ledpszx Ri Dofx Adcjhn TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Concrete weights will be removed. Ljdpfxezwd Dxe Adcjhn

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. Machinery includes Winkworth style mixer, All-Fill pot and bucket filling lines, Pharma Systems capsule and tablet counters, sieves etc. PLEASE NOTE THAT THE LARGE WINKWORTH MIXER IS NO LONGER AVAILABLE. ALL OTHER ITEMS ARE STILL HERE. Lhsdew Nivljpfx Adcsn

Year of construction: 1993, condition: good (used), Manufacturer / Model: ROTOFLEX/ VSI 400 & Ixor Type: Label inserter / cutter / slitter / rewinder with inspection Year / Serial No.: 1993 – 2019 / VLI1254970403P Location: Labelpressshop / Germany Condition: Used – excellent working condition Availability: Immediate Technical Details Max. web width: 400 mm Paper weight range: 90 – 160 gsm Max. unwind diameter: 700 mm Max. rewind diameter: 400 mm Shaft diameter: Unwind 76 mm / Rewind 76 & 40 mm Max. speed: 230 m / min Equipment included: Unwind unit with tension control & web guide, splice table with clamps and automatic web holders, Ixor digital label inserter with touchscreen panel, knife unit with up to 6 razor knives and separators, visual inspection and missing-label control, two rewinder spindles for fast changeover Power supply: 230 V / 50 Hz Lhjdpfx Adoxph Ifjcen Safety systems: All machine safeties installed and fully functional

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Ljdpfevd Eiyex Adcehn

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Ledpjvwkhnefx Adcshn Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, VC-999 QS8 + VC-999 K8T1A-SP ID.NO. 2922 VC-999 chamber machine with associated VC-999 wrapping machine which has previously been used for large whole cheese blocks. Lhedpfjv Iz Hvex Adcjn Dimensions 480 x 190 cm H 225 cm.

Condition: good (used), Year of construction: 2008, OMET FLEXY S330 Year of Manufacture: 2008 _____ Technical Specifications: - Number of Colors: 8 - Web Width: 350 mm - Print Width: 330 mm - Drying System: o UV drying on all stations o 3 additional hot air dryers Unwinder: Single Rewinder: Double _____ Additional features: - 3 Corona Treaters Lsdpfju St R Ejx Adcshn - 1 turn bar - Material thickness: Min. 50 μm, Max. 350 μm - 1 Turn Bar for cold foil lamination - 2 Cutting Stations - 1 Laminating Unit for varnishing and self-adhesive lamination - Coldfoil - Camera Inspection _____

Year of construction: 2018, condition: like new (used), GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control Ledencfukopfx Adcjhn  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609,6mm  Lattice proofing  manual knife box  Automatic Turret  2 x spindle

Condition: good (used), Year of construction: 2012, XEIKON 3300 DIGITAL label printing machine  Type: 3300  Year: 2012  Total counter. 17191 hours  Colors CYMK + White or Orange  Gold maintenance contract  Media width: 200-330mmpi with variable dot density Lhjderp E D Hjpfx Adcsn  Print resolution: 1200dpi  Speed 19m / min  Ice Toner  High productivity through full rotary printing regardless of the number of colors or the repeat length of the job  Media weight: 40 - 350 g / m² (27 lb text to 122 lb cover)  Unwind  Rewind until 125cm

Condition: used, Trailers, construction equipment trailers -Handover: in its current condition as inspected -Note: Vehicle registration document missing, electrical wiring missing/damaged -Trailer: Construction machinery trailer Ledpfxsn Uy Aws Adcohn -Loading area: 2220/1085/H420 mm, rim height 410 mm -Overflow device: Tap type ABV25. 1DZKE 2010 to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm -Empty weight: 650 kg

Condition: excellent (used), functionality: fully functional, Complete machine park for sale, consisting of: Holzher machine park in like-new condition (in operation since 6/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m), Nextec 7705 nesting machining center, Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009), including waste conveyor (new, in operation since 6/2024). Nestro dust extraction system (in operation since 06/2024), consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h), briquetting press, shredder, piping for all machines, various pipe diameters. Mobile dust extraction unit Holzkraft RLA160, 2x mobile dust extraction units ASA2553 or similar. 2x Renner compressors, each 7.5 kW (1x new, in operation since 06/2024). 1x Ayen multiple drilling machine, special construction with 2.5m stop rail. 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014), 2x electric high-lift pallet trucks Toyota/BT (year of manufacture), 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025). Various work tables, templates, pallet racks, material carts, etc. Ljdozh Hw Aepfx Adcehn BeA various nailers & staplers. Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Bench drill Stürmer. Festool table saw. Bosch large panel miter saw on stand. EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection). If you are seriously interested, we can gladly provide pictures and details of the individual items.

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2019, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 800 mm, suspension: air, tire size: 235.75 r 17.5, color: traffic orange, Year of construction: 2019, Equipment: ABS, Moeslin low-bed semi-trailer with gooseneck, used, with ramps, 3 axles with 3rd steering axle, air suspension, EBS, prepared for removable rear ramps, 120 cm front headboard, 5 ton side RUD collar hooks, twist locks for 20+20, 40 and 45 ft containers, 3 through cross-members for stanchion seats, 2 PVC toolboxes, ground clearance 84 cm, year 2019. Dealer: INTERDRIVE SRL-PARMA. Lhjdpfxoxnqvcs Adcen

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Lhedpfez Ea E Sjx Adcjn Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Lsdpfxoz Ea Ito Adcohn Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Ljdpfx Adez Ea I Tjcjhn Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: good (used), ECKOLD R 320 is a specific forming tool specially designed for use with an Eckold Kraftformer Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhedpfx Adjz Arkqjcsn

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. Lhedozwpxzjpfx Adcon It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts.

Condition: new, Year of construction: 2026, functionality: fully functional, Baljer & Zembrod Diameter Reduction Units • Used to reduce the diameter of logs over their entire length to a specified diameter (e.g., 60 cm). Lodpsz R Iy Nefx Adcjhn • Cutter lengths: 420 mm to 1500 mm • Log lengths up to 7 meters • Log centering on the log’s center for maximum yield • Clamping device for the end faces of the log, with a rotary table; clamping frame is hydraulically adjustable.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 10,500 kg, maximum load weight: 28,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2004, next inspection (TÜV): 09/2027, total length: 13,450 mm, total width: 2,550 mm, total height: 850 mm, suspension: air, tire size: 215.75 r 17.5, color: red, trailer brake: trailer braked, Year of construction: 2004, Equipment: ABS, Used extendable Nooteboom lowboy semi-trailer, 3 double axles with air suspension, steerable 3rd axle, ABS, ride height adjustment valve, extendable frame with an additional 4.0m, extending from 9.40m to 13.40m, ground clearance 85cm, lateral anchor points, lateral widening extensions, lateral king pin locations, steel and wood deck, single manually operated ramps, inclined rear section, rear outriggers, container locking devices for: 1x20-1x30-1x40-2x20-1x45 containers, removable side rails on the gooseneck, year 2004, loading tracks for railway cars, inspected until 30.09.2027 - INTERDRIVE SRL DEALERSHIP - PARMA. Lhjdpfsz S Ncnox Adcen

Condition: used, Year of construction: 2001, functionality: fully functional, year of last overhaul: 2017, total width: 1,300 mm, total length: 7,000 mm, operating pressure: 90 bar, total height: 3,000 mm, empty load weight: 7,000 kg, number of previous owners: 2, Bruks root reducer / stem reducer – stem lengths up to 6m, 100 m/min feed rate, fully overhauled in 2017. I am offering a powerful and reliable Bruks root reducer, which is ideal for use in log yards and sawmills. The machine underwent a complete overhaul in 2017. The machine was operated in a system with a feed rate of 100 m/min. Price on request. Lhedpfx Adjzufkzecsn

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Lhedpfx Ajy Ul I Ajdcjn Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Condition: used, Year of construction: 2009, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Machine number: 1795 Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lhodpjy Rygljfx Adcsn Lifting capacity without grab: 2,000 kg / 15.0 m Grab: included Crane position: center Cab side: right For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: good (used), Year of construction: 1985, functionality: fully functional, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3 mm, Equipment: cabin, crane, For sale is a Wolf-Wagen, formerly used by a school. It has few operating hours and is in very good condition! Sold on behalf of a customer! - Miter saw - Measuring device Ljdpfxezau Smo Adcshn - Cut-to-length system - Gripper

Condition: good (used), Year of construction: 2007, Web width: 410 mm Ledpfxsxzrz Te Adcohn 9-color Corona Die Cutting Coldfoil Unit etc. In Production