Combined machine

ROBLAND X31

Condition: ready for operation (used), Technical characteristics 5-operation combination (planer, jointer, router, saw and mortiser) Thicknes planer : Usable width: 310 mm Useful height: 230 mm Surface planer : Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common to the robot and jointer Router : Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45°. Ksdpst T U E Eefx Abnelp Cutting height with 250 mm blade: 80 mm Table width 800 mm Rip fence length: 635 mm Mortising machine : Wick mortising (0 to 16 mm) Power and Motors Voltage: 220 V Pluging: Singlephased Overall dimensions

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Kedpfx Aeyftzkobnjlp Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Klodpfxsxwp S Ij Abnjp Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, The multifunctional woodworking machine is the ideal combination of planer, circular saw, router and thicknesser, providing a wide range of possibilities. The use of 3 motors embedded in a strong, robust and compact design ensures comfortable and trouble-free operation. The circular saw with tilting spindle makes it possible to cut high density boards, MDF, ABS panels, PVC solid wood and other wood-based materials. THICKNESS PLANER. Three knives rotating at 4,000 rpm produce very smooth surfaces, while an adjustable bar allows for planing at an angle. The work tables can be removed when using the thicknesser. Kedpfxewymxao Abnslp MILLING MACHINE. The extendable 30 mm spindle rotates at 6500 rpm in the upper part of the guard with a workpiece holding mechanism. Standard equipment: 30 mm spindle disc 254x30 blade swivelling from 90° to 45° movable table extension side and top workpiece clamping Precise adjustment of the milling stop radius milling attachment angle stop Technical data: Circular saw TABLE DIMENSIONS 940 x 410 mm MAX. saw blade dimensions 254 x 30 mm S1/S6 continuous rated power 1,5/2,1 kW Planer / thicknesser planing width 250 mm THICKNESSER MAX. 250 x 160 mm MOTOR POWER S1/S6 2,2/3,1 kW Milling machine Spindle diameter 30 mm MAX. MILLER DIAMeter 150 mm RPM 6500 rpm CURRENT OPERATING POWER S1/S6 1,5/2,1 kW General data SUPPLY 230 V DIMENSIONS 1100x1250x850 mm WEIGHT 320 kg

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Klodpfx Ajyfw D Aebnep Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen Kodpfxovyt D De Abnelp - free loaded -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Kljdpjxw N Sbofx Abnep Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -