Solid parquet flooring production line

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,764 h, functionality: fully functional, machine/vehicle number: 6640-105136, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5, repeat accuracy: 0.05 mm, number of axes: 6, TECHNICAL DETAILS Load capacity: 235 kg Reach: 2,550 mm Repeatability: ±0.05 mm Axis 1: +170° to -170° Axis 1 optional range of motion: +220° to -220° Axis 2: +85° to -65° Axis 3: +70° to -180° Axis 4: +300° to -300° Axis 5: +120° to -120° Axis 6: +360° to -360° Axis 6 standard rotation range: ±96 revolutions MACHINE DETAILS Controller: IRC5 Dwodpfjzxqcwjx Al Tob Operating hours: 29,764 h EQUIPMENT Manipulator IRC5 controller cabinet All cable sets Teach pendant

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). Dwsdjyaiafepfx Al Tsb In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 6,600 kg, year of last overhaul: 2025, Overhaul work 2025 - Lifting devices overhauled - Bottle carousel overhauled Dwsdjzv Rp Sspfx Al Tjb - Glue roller overhauled - Roller motor replaced - New protective covers installed - Printing heads overhauled - All sensors of the glue heating system replaced - Hoses of the extraction unit replaced - Entire electrical system inspected TECHNICAL DETAILS Output: 45,000 bottles/hour Bottle format: 500 ml, 1 l, 1.5 l Labeling system Labeling method: Roll-fed / roll labeling Label placement: Wrap-around labeling Rotation direction: Clockwise Carousel movement: Mechanical cam drive with brake/clutch Optical centering system: Mechanical Head adjustment: Manual Number of bottle carousels: 25 Number of labeling stations: 2 MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Power consumption: 35 kW Current consumption: 57 A Machine weight: 6,600 kg EQUIPMENT - Mechanical cam drive with brake/clutch for bottle carousel movement - Mechanical optical centering system - Manual head adjustment - Roll-fed labeling system for wrap-around labels - Two labeling stations - Safety guards

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Dwedpfx Aszwmn Tel Tjb Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface Dwsdpfx Aex Dmdhel Tsb High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Dodpfx Alozwd Htj Tswb Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: ready for operation (used), functionality: fully functional, shovel volume: 1.2 m³, Year of construction: 2017, operating hours: 1,650 h, Equipment: pallet forks, TECHNICAL DETAILS Earthmoving bucket volume: 1.2 m³ Dedszylz Depfx Al Tewb 4-in-1 bucket volume: 0.7 m³ Clamshell bucket width: 250 cm MACHINE DETAILS Maximum speed: 40 km/h Operating hours: 1,650 h EQUIPMENT Pronar 2600 dozer blade, two-piece, fully hydraulic Pallet fork Note: The wheel loader has been reclassified as an agricultural towing vehicle up to 3.5 tons. A tested tow hitch and trailer socket have been installed for this purpose. This allows for the possibility of applying for a green license plate.

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Djdpst Akcfefx Al Tswb Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 universal tool head, item no. 6531006 UM-ZP G3 universal tool head, item no. 6531007 Universal cutting tool (UCT), item no. 6532001 EOT-250 oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Djdpfx Aozyktlel Towb Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Djdpfx Aljzyccxo Towb Operating manual

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Dwsdey H U Upspfx Al Teb Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Dsdpfx Ajzx Eaqjl Towb Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Dsdpfx Alozx Anxj Towb Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Dedpfowgnz Njx Al Tewb Control cnc

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position Dsdpfx Aozx Anfjl Tswb MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.