Cake slicer

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg Gjdpfs Ahg T Hjx Aglekd

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer this GEA COMAS LTH Type 400 automatic cake production line, manufactured in 2018, plus an ABRIGO ultrasonic cutting system, also manufactured in 2018. Godpfx Aszk Hdhogljkd For sale is a complete GEA Comas line for the production of layered cakes, manufactured in 2018, consisting of: LTH main unit, TRA tray transfer, DRV and DPP cream and syrup depositing/metering stations, DVB unit, cream lifter-tilter, and syrup unit. Included: Abrigo "Flexcut Plus" ultrasonic cutting system for clean portioning, without deforming the cream/glaze. Functional industrial equipment, in very good condition, with minimal wear – the line has only been in operation for a short time, with few hours of use. Price upon request. For details or to arrange a viewing, please contact us via message or phone. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1980, machine/vehicle number: 9089, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between December 1st, 2026, and December 10th, 2026! Gkjdpe Ahgxcefx Aglod TECHNICAL DETAILS Cutting length: approx. 3,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,200 mm Weight: 5,000 kg Lot number: 77

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, year of last overhaul: 2022, overall weight: 3,800 kg, product height (max.): 280 mm, Equipment: documentation/manual, The machine was overhauled in 2022! TECHNICAL DETAILS Number of printing colors: 1 Product diameter: 20–130 mm Product length: 40–280 mm Product height: max. 280 mm MACHINE DETAILS Godo Ahppwjpfx Agljkd Feeding system: K23 Scrambler with hopper Inspection system: Deco camera inspection system Operating voltage: 230/400 V Frequency: 50 Hz Rated current: 32 A Operating pressure, compressed air: max. 6 bar Compressed air consumption: max. 7 Nm³/h Dimensions & Weight Dimensions (L x W x H): 7,500 x 6,450 x 2,300 mm Total weight: 3,800 kg EQUIPMENT Fully automatic high-speed screen printing machine K9 Single-color screen printing system Automatic product sorting and feeding system K23 Scrambler Hopper Deco camera inspection system for print quality control Suitable for printing cylindrical products such as bottles, tubes, and similar containers Complete maintenance history available up to the time of storage.

Year of construction: 2018, condition: used, Roll production line König Artisan SFC Year of manufacture: 2018 Condition: cleaned & inspected Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flouring system for the top and bottom Guillotine and punch for a wide range of products Touch panel with recipe management Gkjdpfsz A Shaex Agljd Proofer with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4-row operation Includes 1 punching tool of your choice, subject to availability

Condition: used, Year of construction: 2024, operating hours: 20 h, empty load weight: 2,800 kg, arm reach: 3,450 mm, working height: 9,600 mm, TECHNICAL DETAILS Working height: 9.60 m Platform height: 7.60 m Lateral reach: 3.45 m Load capacity: max. 230 kg MACHINE DETAILS Drive type: Electric Dimensions of the aluminum platform: 1.20 × 0.87 m Turning radius (inside/outside): 0 / 1.21 m Turret rotation: ±180° Climbing ability: max. 19° (35 %) Permissible working inclination X-axis: max. 3° (5.25 %) Permissible working inclination Y-axis with automatic stabilization: max. 10° (18 %) Travel speed in retracted state: max. 2.8 km/h Travel speed in extended state: max. 1 km/h Weight: 2,800 kg Operating hours: 20 h EQUIPMENT Track chassis with white tracks Two-person work platform Additional single-person work platform with a load capacity of 120 kg Load hook Gedpfx Ags Ahm N Ielekd

Condition: used, Year of construction: 2025, operating hours: 55 h, load capacity: 990 kg, arm reach: 4,200 mm, TECHNICAL DETAILS Gedpfx Ags Ahm Iuolokd Load capacity: max. 990 kg (depending on the outreach and load chart) Hook height: max. 4.90 m Lateral reach: max. 4.20 m (with manual extension) Lifting capacity: max. 600 kg Working angle of the crane jib: -30° to +70° Swivel angle of the crane jib: ±25° Swivel speed: 2.5 kNm MACHINE DETAILS Operating voltage of the electric motor: 220 V Travel speed: 2.6 km/h Gradeability: max. 25° Operating pressure at the control block: max. 190 bar Hydraulic oil tank volume: 8 l Operating hours: 55 h EQUIPMENT Track chassis Winch for single-rope pulling Electric motor Manual jib extension

Condition: used, Year of construction: 2013, Roll forming line König Artisan SFC Year of manufacture: 2013 Condition: functional, bakery condition Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flour applicator for the top and bottom sides Guillotine and punch for a wide range of products Touch panel with recipe management Molder with water bath, type: MOC-C300 Gsdpfxsz A Smpj Aglskd Includes 3 cutting rollers for 1 to 4 row operation Includes 1 punching tool of your choice, subject to availability

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, Equipment: bar feeder, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar diameter: 20 mm Linear axes: 6 Travel range X1 axis: 58 mm Travel range Y1 axis: 534 mm Rapid traverse speed: max. 30 m/min Spindle speed: 100–10,000 rpm Spindle motor power: 3.7–5.5 kW Speed of driven tools: max. 10,000 rpm Tool positions: 10–14 MACHINE DETAILS Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Connected load: 13 kVA Rated current: 19 A Fuse rating: 32 A Control voltage: 115/230 V Direct current: 24 V DC Dimensions & Weight Machine dimensions: 2,400 × 2,060 × 1,370 mm Machine weight: approx. 3,000 kg Godpfx Ago Ahgklelokd EQUIPMENT ROBObar SBF-532 bar feeder

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Sawing unit Milling unit Work table Table dimensions: 1,180 × 990 mm Fence Fence width: 300 mm Feed 3-roller feed Gsdpfe Ad Iyzsx Aglskd MACHINE DETAILS Machine type: Combination machine Manufacturer: HUG Dimensions Length: 2,000 mm Width: 1,200 mm Height: 1,700 mm Weight: 600 kg EQUIPMENT Sawing unit Milling unit 3-roller feed

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table length: approx. 1,500 mm Planing width: 410 mm MACHINE DETAILS MACHINE DIMENSIONS Length: 1,500 mm Width: 800 mm Gksdpfxs Ad Ix Do Aglsd Height: 1,500 mm Weight: 500 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer Brand: Schuler Machine Type Model: Drop shear Gksdpfxj Ad Ixqe Aglod MACHINE DETAILS Dimensions Length: 1,600 mm Width: 500 mm Height: 1,500 mm Weight Machine weight: 400 kg

Condition: ready for operation (used), Year of construction: 1961, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: PEHAKA Type: USF 4R Year of manufacture: 1961 Machine type: Metal band saw SAWING DATA Roller diameter: 380 mm Overhang: 380 mm Workpiece height: 260 mm Table dimensions: 600 × 600 mm Cutting speed: 0–2,000 mm/min MACHINE DETAILS ELECTRICAL DATA Gkjdpj Ad Iwyofx Aglod Total power consumption: 1.5 kW DIMENSIONS AND WEIGHT Length: 1,200 mm Width: 1,000 mm Height: 1,900 mm Weight: 1,300 kg