Stainless steel agitator tank Tank

10591

Year of construction: 2018, condition: used, 2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate control of the thermo-oil-heated frame and bottom heating. The double-walled container is encased in insulating cladding and has a polished inner surface. The motor mounted on the top drives the chopper and agitator with infinitely variable speed control. A multi-part perforated false bottom is provided for lautering and a rectangular manhole on the side for sparging. In addition, the vessel is equipped with a hinged lid, CIP spray head, temperature probe and spray unit. - Stainless steel wort pan/whirlpool. The container is double-walled and has welded heating zones in the frame and bottom, which are heated with thermal oil. The vessel is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable lock and tangential wort inlet for knocking out. Polished inner surface. - Single-stage plate heat exchanger for cooling wort from 100 °C to 18 °C while simultaneously heating water from 13 °C to 77 °C. The wort from a brew can be cooled within approximately one hour. The plates are made of 1.4401 (AISI 316) stainless steel and the seals are made of EPDM. The wort cooler has a PT1000 temperature sensor. - Thermal oil heating for heating the laser-welded heating zones of the brewing vessels. In the thermal oil tank, approx. 50-65 l oil is heated electrically to a maximum of 150°C. A safety switch ensures that the heating is automatically stopped if the temperature exceeds 160°C. The vessel is equipped with a temperature and level probe. A pump circulates the thermal oil. - 12 hl hot water tank, standing separately on three feet, with a manhole on the top. The tank is heatable, insulated and equipped with a hose level indicator, temperature probe and hot water pump. - Centrifugal pump for product transfer between the tanks and for CIP cleaning with a motor power of 0.37 kW and infinitely variable speed control. - Stainless steel pipes and manual valves for diverting the product flows. The pipes are orbitally welded and have polished inner surfaces. - Control unit with 10" touchscreen and PLC for automation of the brewhouse, housed in a stainless steel control cabinet. The following processes can be controlled and monitored from here: 1. Switching the stirring and chopping unit on/off and speed control. 2. Temperature control of the mash/lauter tun 3. Temperature control for the pan/whirlpool (separate for bottom and frame) 4. Switching the product and CIP pumps on/off and speed control. 5. Display of inlet water temperature 6. Display of wort temperature at the outlet 7. Temperature control of the thermal oil tank 8. Setting of timers 9. Setting of the mashing programme (multi-stage mashing with up to 5 stages; setting of times, temperatures, rotation speeds of the stirrer and the pump) 10. Temperature of the hot water tank. Additional title: compact brewing block with warm water tank Cast wort capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / Control: control cabinet with PLC and touch screen Material: stainless steel 1.4301 (AISI 304) Base construction: Brewing block on stainless steel frame, separate hot water tank Features: Mashing/lautering tun; wort kettle/whirlpool; plate heat exchanger; oil heating; centrifugal pump; pipes and valves; hot ... Pjdpfx Aaow Tbmdohsgg

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet Pjdpfx Aaev Ha Uiehjgg 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: good (used), Used stainless steel agitator tank Item number: 10590 Volume: 2400L Type: lying on four feet Height of the feet: 300mm Material (wetted): 1.4301 / AISI304 Type: double jacket Dome cover Ø 420mm Working pressure according to nameplate: ATM Pedpfxjhtnmas Aahjgg Tank dimension: Outer diameter: 1030mm Cylindrical height: 2675mm Total height: 1545mm Total width: 1390mm Total length: 1890mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Facilities: Nameplate: Yes Double jacket Various connections Agitator with beam agitator

Year of construction: 2016, condition: ready for operation (used), A complete soup production line including can filling, sealing, and washing processes is available. 1) Steam boiler Loos, year of manufacture: 1990, max. operating pressure: 6bar, steam generation: 1250kg/h. Including gas burner Weishaupt, year of manufacture: 1990, max. power: 1730kW, adjustable pressure range: 5mbar-140mbar. 2) Autoclave Lubeca. Including 20 cooking trolleys and various intermediate racks. 3) Can washing machine W. Busser 521-1, year of manufacture: 1984. Including conveyor belt. 4) Can filling and sealing machine. Including conveyor belt. 5) Inkjet printer Linx 8900, year of manufacture: 2019. 6) Basket washing machine Hobart FUX-SAF, year of manufacture: 1990. 7) 2x cooking kettles A.S.T.A. Steiner, max. operating overpressure vessel/double jacket: 0bar/1bar, max. operating temperature vessel/double jacket: 100°C/119°C, volume vessel/double jacket: 300L/20L. 8) Can labeling system. An on-site inspection is possible. This is a complete system with conveying technology and peripheral equipment. Individual or partial sale of the units is possible upon agreement. Pjdpfx Asxliurjahjgg