Series filler

Kreuzmayr Maschinenbau KRF 2

Condition: new, Year of construction: 2025, in line bottle filler for 4 bottles from 0.2 to 2 liter on fixed chassis with storage tank Islhce Hmvhscqmsat

Condition: used, Year of construction: 2003, Technical details: grinding length: 500 mm centre height: 200 mm Iajlhccjvap S Rjqmst total power requirement: 7 kW weight of the machine ca.: 7 t -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm *

Condition: as good as new (ex-display), Year of construction: 2024, consisting of: ᐳ Stop rail 2 m long ᐳ 2 pieces complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right Iajlhccefrnpnoqmot ᐳ Mounting screws - The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.

Year of construction: 2024, Condition: new, - 260 mm cutting height - 750 mm cutting width Iaelhcjvdahwecqmet - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight

Condition: repair required (used), Functionality: fully functional, Piston Filler Brand Heinrich Frey Maschinenbau Model Kompakta 2 Machine number: K2 30 08 10 90 Voltage 380 V Knee control Dimensions: 780 mm x 1000 mm x 1080 mm Ijlhccqowaudwomsat Portioner not working

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t Iajlhcsu Nfttscqmet 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 6290, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness (max.): 4 mm, working width: 6,200 mm, back gauge: 1,500 mm, working length: 6,200 mm, bending length: 6,200 mm, THALMANN THAKO: 6.2 m x 1,500 mm x 3.00 mm We are currently offering a "Thalmann Thako" for sale. The machine has been used very little and is in very good condition. As a 3 mm (steel) machine, the machine also features exceptionally high-quality features, including a 1,500 mm insertion depth. A rare opportunity to acquire a single-arm bending machine/swivel bending machine with this equipment at a (relatively) reasonable price. The following are the key facts: - Thalmann THAKO 30-6.2 M - 6,200 mm bending length - 1,500 mm insertion depth - 3 mm steel, 4 mm aluminum bending capacity - Controlled backgauge Islhcjv Uckpjcqmjat - Roller shear/cutting device - 6 columns - Top condition, rarely used! The machine can be inspected live by appointment.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 14400/02, center height: 200 mm, grinding length: 500 mm, grinding diameter: 600 mm, grinding wheel width: 30 mm, Application: Fully automated external and face grinding of synchronizer rings TECHNICAL DETAILS Control name: SIEMENS 840D Grinding length: 500 mm Ijlhsuyh Insccqmsat Center height: 200 mm Grinding wheel Grinding wheel arrangement: right, 30° inclined Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW Drive and movement X/Z-axis drive: ball screw drive Traversing speed: 0.01 - 10,000 mm/min Resolution: 1 µm Concentricity Workpiece spindle concentricity: < 1 µm MACHINE DETAILS Total power requirement: 7 kW Machine weight: approx. 7 t Workpiece changing system: Fanuc robot EQUIPMENT - Fanuc robot for workpiece change - Ball screw drive for X/Z axis Note: Machine is set up but not connected & can be inspected under power on request

Year of construction: 1990, Condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Iolhccon Sm Ayeqmeat Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 2024, Condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox Iaolhccqobu Rqpomst - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight

Condition: new, Commission and transport trolleys, as well as assembly tables for your company. Ioljd Rhx Ajhccqmeat Our wagons and tables are specially manufactured according to customer-specific requirements. (length, width, height, materials according to customer requirements) We will be happy to make you a suitable offer.

Year of construction: 1993, Condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric Ijlhccon Sm A Soqmoat distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 2024, Condition: new, - 160 mm cutting height - 750 mm cutting width - 5-50 (100) m/min steppless feed Ijlhccqobrq Ndemoat - 37-110 KW sawing motor - 75mm spindle diameter - 2 movable saw bushes

Year of construction: 2025, Condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Elevator motor 0,37 kW Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Fold-away sorting table integrated Central wastewaterdrain on the bottom (ø75mm) Iolhccs Hmtdeqmeat

Year of construction: 2025, Condition: new, 18 kW e-heater for 1000 pices 1 liter bottles used for pasteurization of cold filled bottles, jars,... Iaelhcco Hmwkeqmst automatic temperature control 400V 50Hz 32A 18kW mounted on moveable frame

Year of construction: 2022, operating hours: 150 h, Condition: new, capacity up to 8000kg/std with grinder 5,5kW with shredder belt (plastic chain) speed steplessly adjustable Powerful blower Cleaning water circulation pump Iaelj Hnafshccqmjt

Year of construction: 2022, Condition: new, Stainless steel execution Iolhccj Hnmvoqmsat Motor power 1 .1kw left - right rotation Stirring wave length 1000 mm Mixing blade diameter 150 mm

Year of construction: 2012, Condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control storage tank for BiB with level control Iajlhccqj Hnnhemst BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Year of construction: 2025, Condition: new, Wash, mill and press fruits, pasteurizing the juice and filling in Bag in Box Capacity up to 750l/h incl. mounted hydraulic bin tipper washing-mill Kreuzmayr KWEM1000 single belt press Kreuzmayr KEB500 pasteurizer Kreuzmayr PA750 oil Bag in Box filler Kreuzmayr KBF900, with mounted 6-head bottle filler Juice pump, juice sieve, 2 pieces juice tank á 220 liter stainless steel frame with two axes wheeles 195/50/10 canvas cover with gas pressure spring for both sideboard, backboard able to open Iajlhccqo Uv Itemst 4 pieces shoring for a horizontal arrangement of the plant High pressure cleaner, air compressor and complete pipe installation fix mounted

Condition: new, Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 160 mm, table width: 1,850 mm, table load: 75 kg, 2-axis coordinate table KT1200 for professional use with pillar drilling machines - can be used with all common makes of pillar drilling machines using the adapter plates included in the scope of delivery. Travels: x-axis 1200 mm y-axis 160 mm With the KT1200, you achieve maximum time savings because the time-consuming measuring, scribing, center punching and manual positioning with high tolerances is no longer necessary. Precise positioning and repeat accuracy is made possible. including 2 vices can be freely positioned over the entire travel range, Iaslsuzkdnjhccqmst the coordinate table can be moved in x and y directions using the handwheels; a clamp guarantees that the coordinates approached are fixed, 8 pcs. Position stops for the x-axis, one position indicator each for x- and y-axis Clamping width max. 158 mm, Clamping width 140 mm Space requirement LxWxH 1850 x 560 x 285 mm; Electronic position indicators for x- and y-axis; Repeat accuracy +/- 0.2 mm Weight: 75 kg Max. Workpiece dimensions 120 x 120 x 1200 mm Max. Workpiece weight: 60 kg Mounting support for drilling machine at least 520 x 225 mm Drilling unit optionally available. Now at a special price for stock clearance!

Condition: ready for operation (used), Screening machine RN Maschinenbau 21/55-2 Brand: RN Maschinenbau Surface: length 5500 mm, width 2100 mm – 2 Deck Iaslhccjvtvlkjqmjt Screen Opening Upperdeck: [] 18 mm. Screen Opening Lowerdeck: [] 8 mm. Driving: 30 kW E-Motor Incl.: Springs.

Year of construction: 2014, Condition: new, for 3/5/10 liter BaginBox packaging material: plastic Ielhcco Hncioqmsat

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: A04-0040, TECHNICAL DETAILS Number of spindles: 9 Additional sanding unit: Yes Multiple processing: 9 spindles allow for comprehensive processing of the wood in a single pass. Surface processing: Sanding unit ensures a smooth and fine surface of the processed wood. Feed rate with sanding: 5-8 m/min Feed rate without sanding: up to 25 m/min Spindle configuration Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: left Iaolhccqewhlalsmjt Spindle 5: left Spindle 6: left Spindle 7: right Spindle 8: top Spindle 9: right Sanding unit: bottom Sanding unit: top MACHINE DETAILS Dimensions: 8,230 x 1,460 x 2,200 Installation dimensions: approx. 9,276 x 2,630 x 3,000 mm EQUIPMENT Various planing heads expand the machine's flexibility and application possibilities.

Condition: used, Year of construction: 2009, No. 04471 Edge banding machine Lange Maschinenbau B 70 Used, year of construction 2009 Single-sided automatic edge banding machine for hot melt adhesive pre-coated edge material. The glue is reactivated with hot air. Edges can be processed as roll material as well as in fixed lengths from all standard materials such as PVC, ABS, melamine and real wood veneers. Machine table with 13 rollers Edge infeed, synchronized with the belt feed, adjustable edge thickness Pneumatic edge separation with a knife Belt feed, 50 mm wide toothed belt with thick rubber coating Flush trimming unit for front and rear workpiece edges, automatic scanning on the workpiece Flush trimming unit top/bottom with vertical scanning and horizontal guidance, reproducible setting using digital counters, 2 high-frequency motors, infinitely variable from 4000 - 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15" Central extraction nozzle diameter 100 mm, 2 chip extraction hoods for hose diameter 60 mm Automatic height adjustment of the upper cutter Powerful hot air blower with infinitely variable electronic temperature control Roller table diameter 800 mm Workpiece thickness 10 - 50 mm Workpiece width min. approx. 80 mm Workpiece length min. approx. 200 mm Total connection 4.5 kW Heating power 3.4 kW Heating time max. 2 minutes Pneumatic connection 6 bar Transport dimensions approx. 1800 x 700 x 1300 mm LWH (without plate) Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Iajlhccqjwk Hy Eomot Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2015, Used machine Year of construction: 2015 Condition: Factory overhauled technical data: Workpiece thickness 8 - 50 mm Workpiece width min. approx. 75 mm Edge thickness 0.4 - 3.0 mm Single feed solid edge up to 5 mm Chip removal Joining unit 0 - 2 mm stepless Electrical connection 400 V, 50 Hz Total connection 7.5 kW Feed speed 5.5 - 8 m/min. Pneumatic connection 6 bar Net weight 850 kg Equipment: Joint milling unit with 2 motors and 45 mm high milling heads instead of 30 mm PUR/EVA outlet basin printing unit Iaelewka Ivehccqmjt cross-cut saw Combination trimming unit Corner copying unit Radius scraper Surface scraper Location: Hochheim Availability: Short term