IMA AXIS CARD

KERN

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Inserting speed: 22,000 mail pieces/h Guedsyzpgiopfx Ab Dsa Envelope stacking capacity: 3,000 pieces (24#) Insert stacking capacity: 2,000 pieces (single, folded 20#) Feeder capacity: approx. 45.56 cm Tolerance: ± 0.08 cm Format range: 9.84 × 16.19 cm to 17.62 × 25.08 cm MACHINE DETAILS Electrical data Power supply: 3 × 400 V, 3PN+E, 50–60 Hz Protection: 16 A Dimensions: approx. 11.89 x 0.92 m Counter reading: 145,000,000 The indicated dimensions and format sizes were taken from the data sheet and converted from US measurements (in./ft.) to cm. Note: The machine is currently under a full maintenance contract.

Condition: used, Year of construction: 2006, functionality: limited functionality, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Gjdeyz Udtepfx Ab Djua Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces Gedpfox H A Nbsx Ab Dsua • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Gujdpfx Absxn Axcj Doa

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Gujdjvl Ig Dspfx Ab Dja

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1500 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. Godswgn Agepfx Ab Deua It is characterised by: --> Ease of operation Precision Working range

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 Gusder D Nmyjpfx Ab Dsa - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: like new (used), amount 1 Set Gujdpfeyr Si Tox Ab Dja For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse

Condition: used, Year of construction: 2002, Kern 3000 envelope inserting machine. The device is in working condition, used only occasionally at a backup facility, so it requires cleaning and maintenance. Gjdpfx Asv D Eg Sjb Deua

Condition: used, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale division: 0.01 mm Locking screw missing Pos12 Manufacturer: Mahr Measuring range: 125 – 170 mm Scale division: 0.01 mm Pos13 Manufacturer: Unknown Measuring range: 195 – 220 mm Scale division: 0.01 mm Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100–125 mm Scale division: 0.01 mm Pos15 Manufacturer: Mitutoyo Measuring range: 25–50 mm Scale division: 0.01 mm Pos16 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos18 Manufacturer: PAV Gedeyhmwqepfx Ab Dsua Measuring range: 250–275 mm Scale division: 0.01 mm Pos19 Manufacturer: Hommel Werke Measuring range: 200–225 mm Scale division: 0.01 mm Pos20 Manufacturer: Mahr Measuring range: 70–95 mm Scale division: 0.01 mm Pos21 Manufacturer: Unknown Measuring range: 100–125 mm Scale division: 0.01 mm Pos22 Manufacturer: Mahr Measuring range: 45–70 mm Scale division: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145–170 mm Scale division: 0.01 mm Pos24 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos25 Manufacturer: Mitutoyo Measuring range: 0–25 mm Scale division: 0.01 mm Pos26 Manufacturer: Kern Measuring range: 0–25 mm Scale division: 0.01 mm Pos27 Manufacturer: Mahr Measuring range: 195–220 mm Scale division: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70–95 mm Scale division: 0.01 mm Pos29 Manufacturer: Unknown Measuring range: 25–50 mm Scale division: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25–50 mm Scale division: 0.01 mm Pos31 Manufacturer: Mahr Messtechnik Measuring range: 195–220 mm Scale division: 0.01 mm Pos32 Manufacturer: Mahr Measuring range: 220–245 mm Scale division: 0.01 mm Pos33 Manufacturer: Mahr Measuring range: 245–270 mm Scale division: 0.01 mm Pos34 Manufacturer: Mahr Measuring range: 270–295 mm Scale division: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120–145 mm Scale division: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145–170 mm Scale division: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150–175 mm Scale division: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175–200 mm Scale division: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250–275 mm Scale division: 0.01 mm Pos41 Manufacturer: PAV Measuring range: 275–300 mm Scale division: 0.01 mm Thread micrometers – Measuring micrometers Micrometer – Micrometer screw gauge – Measuring instrument e.g. for gear measurement – External measuring instrument – Disc