Automatic Powder Press

Kemwall Engineering P6-5

Condition: refurbished (used), After refurbishing, our Leybold Sogevac SV 1200 Rotary Vane Pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances Gjdpfx Aehqxtqogljkd be fitted with new wear parts be available at short notice included one-year warranty

Year of construction: 2004, condition: used, functionality: fully functional, ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 200 Gkedpfx Ajycw Uvogljd Machine for compaction of the raw material is exclusively effected by the press rollers under hydraulic pressure. Specifically for use in the production area. Built in 2004. CHARACTERISTICS - Control system: external control cabinet - Roller diameter: 200 mm - Roller width: 75 mm PRODUCTION - Output: up to 500 kg/h - Maximum pressing force: 20 kN/cm - Maximum roller gap: 5 mm - Maximum roller speed: 38 U/min DIMENSIONS - Footprint: 2,010 mm x 1,245 mm x 1,700 mm - Weight: 2,450 kg - Cabinet size: 2,100 mm x 800 mm x 600 mm - Weight without switch cabinet: 2,050 kg - Switch cabinet weight: 400 kg

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Gkodpsyacaxefx Aglod Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition.

Condition: new, Year of construction: 2026, functionality: fully functional, Eccentric press 160t / 1600kN Siemens 1200 PLC Adjustable stroke 16–160mm Ram adjustment 100mm Ram plate 740 x 420mm Ram plate thickness 100mm Table plate 1250 x 700mm Gedpewir U Ejfx Aglokd Table plate thickness 180mm Motor 15kW Weight 16,000 kg For new machines, delivery time approx. 4–5 months.

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Gksdpfx Agsptbi Dsljd

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Excellent Condition: Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Condition & Terms of Sale: Please note: The furnace is being sold strictly on an "AS IS, WHERE IS" basis directly from our warehouse. Gksdpjzkwp Iefx Agljd The furnace was professionally dismantled from a working cleanroom environment. All wiring and connections are carefully labeled for easy reassembly by the buyer. For full transparency: Two internal graphite heating elements were damaged during the dismantling process and will require replacement. Otherwise, the equipment is 100% complete and ready for immediate relocation. You are highly encouraged and welcome to physically inspect the equipment in our warehouse near Białystok, Poland, prior to purchase. ##### Equipment Overview: Furnace chamber made entirely of stainless steel, double-walled for water-cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and service. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required.

Condition: used, Used Morton-Lödige FKM1200D ploughshare mixer approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has (6) stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by an 18.5kW , 1450rpm geared motor through a Renold Ltd gearbox with 49/4 : 1 ratio giving approximately 118rpm output on the shaft. Unit has a pneumatically operated bottom entry discharge valve. Unit is mounted on a mild steel frame. Specifications: Bowl Volume: 1,200 L Motor Power: 18.5 kW Material Of Construction: Stainless Steel Choppers (Y/N): N Revolutions Per Minute: 118 Jacket (Y/N): N Dimensions: 1750mm x 1000mm Gkjdpfx Aoyw S R Nsgled

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Gsdpfx Agjx R Avvolskd Handling trolley  

Condition: new, Year of construction: 2026, The VTLF 2.250 is a medium vacuum, dry-running displacement pump designed to operate on a continuous duty basis. It utilises self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change. 100% dry-running (oil-less) operation Long vane life Continuous duty rated FEATURES 100% dry-running (oil-less) operation Quiet operation Long vane life Continuous duty rated Air-cooled Single shaft direct drive Compact design Gkedpjtty Duofx Agled Variety of motors available BENEFITS Low operation and maintenance costs No cycling times Quiet operation – no silencer enclosures necessary Small footprint for space savings Straightforward construction for fast and easy service on-site to reduce downtime SPECIFICATIONS Volume flow 50 Hz 244 m³/h Vacuum absolute 50 Hz 200 mbar Power 50 Hz 5.5 kW Noise Level 50 Hz 77.0 dB(A) Volume flow 60 Hz 286 m³/h Vacuum absolute 60 Hz 200 mbar Power 60 Hz 6.6 kW Noise Level 60 Hz 79.0 dB(A) Weight 151.0 kg without motor

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Godpjx R Ar Refx Aglokd Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw: 0.1–180 rpm Compaction screw: 1–460 rpm Compaction zone with pressure rollers: 1–30 rpm Granulation zone with star rotor and screen: 0–180 rpm Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical, control, and safety cabinets are not available. These items can be quoted separately.