Die cutting, embossing and finishing mac

KAMA ProCut 76 Foil

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Dwodeziaqfjpfx Akcjc

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities Djdpfxeziatgs Akcjwc • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Dodpfxey Nnaks Akcjwc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 220 V, Equipment: auto duplex, brochure finisher, RISO COMCOLOR 3110 (A4) 90ppm with Small Finisher (FDS) and Scanner. Dodpfx Akexwc S Iscewc It is on a very good condition . Only 606.000 color print and 1.730K black. Print heads has no lines , it comes from a general maintained. Inks are about 50-60%. General: - The device is excellent, in full working function. All its systems and print head are working perfect. No lines. - A general technical service take place few weeks ago. - we can ship it worldwide, after secure its systems inside and store it on a 2 standard europallets 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us.

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system). Dwjdpfx Akswabbvocjc

Condition: good (used), Complete syrup plant with CIP and water preparation, installation connected with stainless steel pipes, valves, and pumps. Dsdoywnlcepfx Akcowc

Condition: used, "Cleaning-in-place" system consisting of 4 vertical stainless steel tanks for acid, fresh water, alkaline solution, and rinsing water. Most recently used for cleaning a filter room. The system is heated via a heat exchanger using steam. The feed pump circulates the media through the process. Machine (additional information): 4-tank system with feed pump and heat exchanger. Dsdozi Ampopfx Akcswc Material: Stainless steel Location/Position: Tanks standing on pipe supports. Basic design: Cylindrical, open tanks with hinged lids. Equipment: 4 x CIP tanks; feed pump; heat exchanger; control cabinet with digital control panel; various pipes and valves.

Condition: used, Vertical tank with a top-entry three-bladed propeller agitator (TMR, 1.6 kW), most recently used for mixing diatomaceous earth. Additional title: vertical vessel with agitator Dsdpszi Aquofx Akcjwc Volume appr.: 1500 l Power: 1,6 kW Length: 1100 mm Width: 1100 mm Height: 2200 mm Position: standing on 4 feet Base construction: cylindrical vessel on feet Features: Agitator; manhole on the top; control cabinet

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,830 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details. • Condition: Very good, fully functional • Working hours: 3830 h • Machine under power: Yes • Cutting system: CNC plasma / oxy cutting • Plasma generator: PP130A (included) • Max cutting thickness: up to 30 mm • Machine parameters: • Installed power: 4 kW • Power supply: 400 V / 3 PH / 50 Hz • Input current: 6 A • Plasma generator parameters (PP130A): • Max power consumption: 26 kW • Power supply: 400 V / 3 PH / 50 Hz Djdpfx Aozh U E Uekcowc • Max input current: 40 A • Weight: 520 kg • Documentation included: user manual, operation manual, technical documentation