Testing device

Instron DTB 2

Year of construction: 1986, condition: used, machine/vehicle number: 80.000.-978, Version A, size 1 Test force: 750 kN Type of force effect: spring load kN Gsdjl Axc Uepfx Acwstt pre-force: max.300 kN Projection: 200 mm Test height: 14 mm Voltage: 380/220 V Type of current: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness measuring electronics type 2.802.007 - Glare shield for ground-glass device Space requirement: 360 x 840 x 1250 mm Weight approx. 620 kg

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climatic test chamber Technical data: Test chamber nominal volume 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width 2970 mm Height 2370 mm Depth 1530 mm Rear wall Minimum insertion dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Double-leaf door, clear width Width 2000 mm Height 1000 mm Heated viewing window, 2 pieces Width 500 mm Height 600 mm Feed-through opening, 1 side panel left ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature difference, temporal ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in the supply air without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 %r. F. Humidity difference, temporal ≤ ± 3.0 %r. F. Dew point range, temporary down to -5... 95°C Refrigeration system: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Air conditioning and dryer refrigeration system air-cooled /hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical mains connection: 400V 3/N/PE.AC,50Hz Mains plug: CEE 5-роlig, 32 A, with 5.0 m cable Max. simultaneous power requirement 10.0 kW Supply line fuse: 3x 25, Char, C A Degree of protection IP20 Gjdpfx Aek E Hnqscwstt Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2001, Technical Specification Universal Testing Machine UTS Testsysteme / Zwick Roell ZMART.PRO 1150.00803 Gtodpfx Ajxbrm Aocwjt Identification Data Name: Universal Testing Machine Model/Type: ZMART.PRO 1150.00803 Manufacturer: UTS Testsysteme GmbH / Zwick Roell Year of Manufacture: 2001 Place of Manufacture: Ulm, Germany Serial Number: 0109 3045 Drive Unit Servo Actuator: GEORGI KOBOLD, type KSY 4612.20-2 R6 Actuator Power: 400 × 3.80 W Planetary Gearbox: NEUGART, type PL 115-25 Maximum Load: up to 50 kN Measuring Table Material: Metal Dimensions: 900 × 500 mm Control System Control Cabinet: Controller BZ1 – MM050M1.UT01 Controller Serial Number: 821501/11 Computer/Software: TESTXPERT by Zwick Roell Load Cell Manufacturer: Zwick / Roell Year of Manufacture: 2014 Type: Series K Nominal Load: 50 kN Summary This machine is a complete universal testing system designed for mechanical testing of material samples under loads up to 50 kN. Equipped with a modern load cell (year 2014) and TESTXPERT software from Zwick Roell, it enables a wide range of strength and durability tests compliant with current standards. The UTS Testsysteme / Zwick Roell ZMART.PRO universal testing machine is intended for strength testing of materials and structural components. Main Applications: - Tensile tests – determining the force required to break a sample (e.g., metal, plastic, rubber, composite). - Compression tests – assessing material behavior under high compressive force. - Bending and fracture tests – assessing resistance to breaking under static load. - Cyclic and fatigue tests – evaluating the durability of elements under repeated loads. - Material characterization – determination of parameters such as yield strength, tensile strength, modulus of elasticity, elongation at break, etc. Application Areas: - Research laboratories (universities, institutes, certification bodies) - Plastics industry – testing properties of new composites, technical plastics, rubbers - Metal and aerospace industries – quality control of metal alloys, aluminum, steel - Automotive industry – quality assurance of parts and structural materials - Quality control in serial production – testing product samples before market release.