Sheetfed offset press

Heidelberg PM52-4

Condition: used, Year of construction: 2006, color channels: 4, paper width (min.): 520 mm, paper width (max.): 520 mm, Heidelberg PM 52-4P Offset Printing Press PRICE: $39,000 USD Buyer is responsible for all rigging and dismantling within our facility. Buyer to arrange transportation after removal. Offered for sale is a well-maintained Heidelberg PM 52-4P, ideal for short to medium run commercial printing with fast makeready and excellent color consistency. - 79 million impressions Fgedpfex Tcx Nsx Adwea - One owner since new - Complete maintenance history, fully documented and serviced exclusively by Heidelberg technicians - Regular preventive maintenance performed to manufacturer standards - Classic Console, Easy Plate, Auto Roller Washers, Auto Blanket Washer The press has been serviced by Heidelberg its entire life. We have the full service history on the machine.

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW Fedsuf Sy Aopfx Adwoga - Compressed air supply: 6 – 7 bar

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The following LOOS brand steam boilers are the subject of the offer: LOOS U-ND 350 steam boiler Specification: - working pressure 1 bar - boiler control cabinet - oil burner - feed pump Steam boiler LOOS U-HD 800 Specification: - working pressure 10 bar - boiler control cabinet - Weishaupt gas-oil burner - Grundfos CR feed pump - safety valve - feed water tank - chemical inhibitor tank with dosing pump Fedpfjuhm Erex Adwega Loos U-HD 1250 steam boiler Specification : - working pressure 16 bar - control cabinet - Weishaupt gas-oil burner - Grundfos feed pump

Condition: used, WIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC Unit functions only with DC welding and contact ignition Serial no.: 445276 Year of manufacture: approx. 1990 Output: 230 amps = 35% duty cycle 180 amps = 60% duty cycle 140 amps = 100% duty cycle Adjustment range: stepless Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding function Fedpfedzqa Iox Adwoga - DC welding with contact ignition operational - AC welding and high-frequency ignition not operational - 7 meter hose package with TIG torch - Connector for remote potentiometer (foot pedal) - foot pedal not included - Air cooled - Gas pressure regulator Space requirements (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test produces good results when welding stainless steel with DC current; high-frequency ignition is non-functional, but the arc can be triggered via a short contact. When welding aluminum with AC current, no arc is formed.

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m Fgodpfx Ajvmfxgjdwea ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. Fsdpfx Aeymxiiodwoga The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. Fgodjdzwwnopfx Adwea -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: ComColor 9150, number of ink cartridges: 4, color channels: 4, number of print heads: 4, type of input current: DC, input voltage: 220 V, Equipment: auto duplex, brochure finisher, raster image processor, RISO COMCOLOR 9150. It is on a very good condition . It has 9m prints , all on A4/A3 . Print heads has no lines , it comes from a general maintained. It comes with High Capacity Feeder 4000 pages , High Capacity Receiver of 4000 pages (one cart) and a controller IS950C. We can also add a scanner + stand without extra cost. Inks are about 70%. General: - The device is excellent, in full working function. All its systems and print head are working perfect. No lines. Fjdpfexp Ng Nex Adwsga - A general technical service take place few weeks ago. - we can ship it worldwide, after secure its systems inside and store it on a 1 standard europallets 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us.

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding Fgjdpfx Adjg Du Aqewea With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Fsdpfx Adeyi Da Sswsga Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.