Extraction

Höcker

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Hedpfx Acovviytozop Storage location: Nattheim

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. Hjdpfsgwlrdsx Aczop All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Hsdpfx Acovvizkjzjp

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW Hjdpfex Td Iljx Aczjp -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm Hodpfx Acsg Stz Aezjp

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical data: - Transport fan - 22 kW - Motor 22 kW - 400 V - 2955 rpm - Volume flow 9000 m³/h - 4500 Pa - Suitable for dust and chips - Freely positionable installation Hjdpfxezdlwte Aczop - Motor block on the side - Direct drive - Open impeller design - Suction nozzle 400 mm; expanded to 450 mm - With flange ring - Pressure nozzle 400 mm; expanded to 450 mm - With flange ring - Dimensions approx. 1200 x 1100 x 1350 mm - Weight approx. 880 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical specifications: - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration Hedpfx Acjx H Dahszep - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Hjdpfx Acoi A Ix Hszsp

Condition: used, Mobile suction unit used Hjdottxf Uepfx Aczjp technical data follow Availability: short term Storage location: Röllbach

Condition: used, used mobile extraction unit Extraction nozzle diameter: 140 mm Hedpjy Nug Refx Aczop Motor: 1.5 kW - 400 V with steel impeller Availability: short-term Storage location: Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Hjdpfx Aji Artlsczsp

Condition: ready for operation (used), Year of construction: 2019, A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Hodpfx Acezhnq Rjzjp

Condition: used, Year of construction: 2017, machine/vehicle number: MR007053, Extraction unit with briquetting press, the machine is in good condition and ready for immediate use. The extraction unit is equipped with a Falach 35 briquetting press. The extraction system includes: - Electrical coupling between the extraction unit and the briquetting press (in case of a briquetting press failure, the extraction unit stops) - Automatic start of the briquetting press - Briquetting press capacity - approximately 35 kg/h (depending on the type of dust) Technical specifications: - Airflow (m3/h): 6000 - Dimensions (L x W x H): 3,120 x 1,050 x 3,350 mm - Diameter of extraction inlet: 300 mm - Motor power (kW): 7.5 kW Hjdpezhmm Djfx Aczop

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor Hedpfxsvvblhe Aczep -Condition: unused -Manufacturer: SEW-Eurodrive, gearmotor with brake, parallel shaft gear unit series F -Type: FH87/G DRN132M4/BE11HF/TF -Speed: 50 rpm -Power: 7.5 kW -Protection class: IP54 -Hollow shaft: Ø 65 x 280 mm -Brake: 55 Nm -Quantity: 1 piece available -Price: per piece -Dimensions: 800/330/H530 mm -Weight: 190 kg

Condition: used, Year of construction: 2017, machine/vehicle number: MR007050, Used: Höcker Polytechnik Vacumobil 200 in good condition, ready for immediate use. Price is quoted ex works Staphorst. Technical specifications: - Airflow rate (m3/h): 3400 - Extraction nozzle diameter: 200 mm - Serial number: 179 Hedpjzhmaqofx Aczop - Motor power (kW): 4 kW