Window tool set / tool set

GOLD IV68 / IV78 / IV88

Tool set / GOLD for the production of tilt-and-turn windows / doors IV 68, IV 78, IV 88

Including extension set IV 68 for WOOD-ALU windows in the Gutmann Mira system or equivalent

Technical data / composition

- EURO rebate system with open rebate plates, 12 mm rebate gap
- Rain screen: BUG AP 16.23
- Rebate profile 24 mm for 13 mm gear center distance
- GOLD Softline version, all edges rounded, outer edges R = 4 mm
- Continuous ventilation groove in the glass rebate
- Moisture equalization into the cold zone, upwards and downwards
- With identical tenon spacing for element construction
- Frame overlap, sash cheek and glass bead at 20° angle, sash overlap with additional seal
Kdodpezfxnuofx Agpon
- Pronounced joint rounded, continuous sash seal, sealing rebate on the glass bead
- For glass bead with overlap, pronounced joint R = 3 mm
- Inner edges R = 1.5 mm
- No pre-scoring in the longitudinal area
- Router cutters in the groove / tenon area for precise spacing
- Continuous sash center seal and additional seal in the overlap
- GOLD precision tools for the highest demands
- Indexable insert system with HW fine-grained quality for long tool life and best surface qualities
- Mostly with reversible cutting edges (2 cutting edges) for reduced spare parts costs
- Optimized for solid wood with glued joints
- Self-centering cutter tension (without aids such as templates or magnets)
- High-precision repeat accuracy due to center tension of the indexable inserts for shortest set-up times
- Closed design for less noise with maximum running smoothness
- Tool construction according to DIN / EN 847-1 with BG-TEST - test certificates
- Screwed with precision threaded inserts onto the respective spindle diameter and stroke

TOOL SCOPE IV 68 – IV 78 - IV 88

Cross processing:

HW indexable insert version, Z = 2 / Z = 4, outer diameter 320 mm
BG-TEST version, threaded inserts 60 / 50 mm, stroke 100 mm

P1 – Frame groove (bs)
P2 – Frame tenon top (bzo)
P3 – Frame tenon bottom (bzu)
P4 – Sash groove, Z = 4 (fs)
P5 – Sash tenon, Z = 4 (fz)
P6 – Frame counter profile bottom (bkuq)

Longitudinal processing:

HW indexable insert version, Z = 2, outer diameter 140 mm
BG-TEST version, threaded inserts 60 / 50 mm, stroke 95 mm

P8 – Frame inside, side and top (bso)
P9 – Frame inside, bottom, transverse (bu)
P10 – Sash inside profile without bead (flml)
P11 – Sash outside profile all around COUNTER-CLOCKWISE incl. replaceable cutter
for overlap seal with integrated edge gearing (fa)
P14 – Sash outside CLOCKWISE with integrated edge gearing (fg)
P13 – Sash outside profile, left middle rebate with gearing (fam)
P16 – Sash door widening (ftv)
P24 – Frame counter profile bottom (bku)
P20 – Frame outside - tongue and groove


TOOL SCOPE: Extension set IV 68 (WOOD-ALU window)

1 - 02 Supplementary tool for frame groove
2 - 02 Supplementary tool for frame tenon
3 – A8 Frame inside all around complete (NEW tool)
4 – A4 Sash groove
5 – A5 Sash tenon
6 – A10 Sash inside all around

Tools / tool set in partial screwed version

The listing was translated automatically. Translation errors are possible.