Dionex HPLC System

Dionex

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1% Flow rate precision: < 0.1% Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analytical only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Hodpfx Aezdtlfedrenn Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus dual pump 6-port valve MXP9900-000 AFC-3000 automated fraction collector RFC-10 regulator Condition: used Scope of supply: (See pictures as shown) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have by phone.

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Hodpfx Adextb Efjronn Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: ready for operation (used), The Thermo Scientific Dionex ICS-Series VWD is a highly advanced variable wavelength detector designed to provide accurate and precise detection of analytes in complex samples. It is a vital component of the Dionex ICS-Series chromatography system and is used for a wide range of applications, including pharmaceutical research and development, environmental monitoring, food and beverage testing, and more. Hjdpfx Aexnm Rvjdrenn The detector is equipped with a state-of-the-art flow cell design that ensures excellent signal-to-noise ratios, providing exceptional sensitivity and selectivity for even the most challenging separations. The flow cell is also designed to minimize dispersion and band broadening, ensuring high resolution and accurate peak detection. The Thermo Scientific Dionex ICS-Series VWD Detector features a variable wavelength range of 190 to 900 nm, which enables it to detect a broad range of analytes. It also has high-speed scanning capabilities, enabling rapid data acquisition and analysis, making it ideal for high-throughput applications. Good working condition. Please check out our other listings as well.